Fujitsu MAA3182SC Manuale di installazione e funzionamento

C141-E039-01EN

MAA3182SC, MAB3091SC

INTELLIGENT DISK DRIVES

OEM MANUAL

– SCSI LOGICAL INTERFACE SPECIFICATIONS –

C141-E039-01EN i

FOR SAFE OPERATION

Handling of This manual

This manual contains important information for using this product. Read thoroughly before

using the product. Use this product only after thoroughly reading and understanding

especially the section “Important Alert Items” in this manual. Keep this manual handy, and

keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from

suffering damange to their property. Use the product according to this manual.

Functional Limitations

There may be certain functional limitations concerning the specifications and functions of the

products covered by this manual depending on the equipment version, especially concerning

the following functions.

Versions in which there functions can be used will be communicated through

“ENGINEERING CHANGE REQUEST/NOTICE”, issued by Fujitsu.

Function Equipment Version Which Supports These Functions

Equipment

Version No. EPROM

Version No. Standard INQUIRY Data Product

Revision (ASCII)

READ RAM Command These commands cannot be used in the current version.

WRITE RAM

Command

(Proceed to the Copyright Page)

C141-E039-01ENii

Related Standards

Specifications and functions of products covered by this manual comply with the following

standards.

Standard (Text) No. Name Enacting

Organization

ANSI X3. 131-1986 American National Standard for

Information Systems --- Small Computer

System Interface (SCSI)

American National

Standards Institute

(ANSI)

ANSI X3. 131-1994 American National Standard for

Information Systems --- Small Computer

System Interface-2 (SCSI-2)

American National

Standards Institute

(ANSI)

X3T9.2/85-52 Rev

4.B COMMON COMMAND SET (CCS) of

the Small Computer System Interface

(SCSI)

American National

Standards Institute

(ANSI)

X3T9.2 855D Rev 12 WORKING DRAFT Information

Technology SCSI-3 Parallel Interface American National

Standards Institute

(ANSI)

C141-E039-01EN iii

REVISION RECORD

Edition Date

published Revised contents

01 May.,1997

Specification No.: C141-E039-**EN

The contents of this manual is subject to

change without prior notice.

FUJITSU LIMITED

C141-E039-01EN v

PREFACE

This manual explains concerning the MAA3182SC and MAB3091SC series 3.5 inch hard disk

drives with internal SCSI controller.

The purpose of this manual is to provide specifications of each command and detailed

explanations of their functions for use of these magnetic disk drives incorporated into user

systems, and to present the information necessary for creating host system software. This

manual is written for users who have a basic knowledge of hard disk drives and their use in

computer systems.

The composition of manuals related to these disk drives and the range of subjects covered in

this manual are shown in “Manual Organization,” provided on a subsequent page. Please use

these other manuals along with this manual as necessary.

Composition and Contents of This Manual

This manual is composed of the 5 chapters shown below, a glossary and a list of

abbreviations.

Chapter 1 Command Processing

This chapter describes the basic logical specifications related to SCSI command processing in

the MAA3182SC and MAB3091SC series disk drives.

Chapter 2 Data Buffer Management

This chapter describes the data buffer configuration provided in the MAA3182SC and

MAB3091SC series disk drives and concerning data transfer processing functions and cache

operation.

Chapter 3 Command Specifications

This chapter describes detailed specifications of SCSI commands provided by the

MAA3182SC and MAB3091SC series disk drives and how to use them..

Chapter 4 Sense Data and Error Recovery Methods

This chapter describes the configuration and contents of sense data which report to the host

system when an error occurs, etc., key information necessary for error recovery, recommended

procedures for error recovery to be executed through host system software and retry

processing executed internally in the MAA3182SC and MAB3091SC series disk drives for

recovery.

Chapter 5 Disk Media Management

This chapter describes the procedure for initializing the disk media, methods of treating media

defects and data recovery methods for the MAA3182SC and MAB3091SC series disk drives.

vi C141-E039-01EN

Glossary

The glossary explains technical terms which are necessary to the reader’s understanding when

reading this manual.

List of Abbreviations

This list shows the full spelling of abbreviations used in this manual.

The model name of disk drives covered by this manual differs in its ending suffix (Note 1)

depending on its device type (3 types), the electrical conditions of the SCSI interface used to

connect the disk drive to the host system and its capacity and data format at the time it was

shipped, but in this manual, except in cases where models need to be especially distinguished,

a representative model name (Note 2) is used. In addition, these disk drives are called

Intelligent Disk Drive (IDD), “drive” or “device” in this manual.

Note 1: Model Name

M29 0XSA

Format When X: 256-byte format (except for M294x and M295x)

Shipped A: 512-byte format (except for M294x and M295x)

B: 1024-byte format (except for M294x and M295x)

SCSI Electrical S: Single-ended, 8-bit SCSI (all series)

Conditions H: Differential, 8-bit SCSI (except for M294x and M295x)

Q: Single-ended, 16-bit SCSI (all series)

R: Differential, 16-bit SCSI (except for M294x and M295x)

C: SCA-1, 16-bit SCSI (M293)

E: SCA-2, 16-bit SCSI (M294x, M295x)

Capacity and 9: 19 heads (M2909) 9: 9 GB (M2949)

Number of 3: 13 heads (M2903) 2: 2 GB (M2932, M2952)

Heads 5: 15 heads (M2915) 4: 5 GB (M2934, M2954)

Device Type 0: Full height, large capacity (M2903, M2909)

1: Full height, high performance (M2915)

3: Full height, large capacity, high performance (M293x)

4: Full height, large capacity, high performance (M2949)

5: 1-inch height, high performance (M2952, M2954)

C141-E039-01EN vii

Note 2: Representative Model Names

Representative

Model Name Model Name

M2909 M2909SX/SA/SB, M2909HX/HA/HB, M2909QX/QA/QB,

M2909RX/RA/RB

M2903 M2903SX/SA/SB, M2903HX/HA/HB, M2903QX/QA/QB,

M2903RX/RA/RB

M2915 M2915SX/SA/SB, M2915HX/HA/HB, M2915QX/QA/QB,

M2915RX/RA/RB

M2934 M2934SX/SA/SB, M2934HX/HA/HB, M2934QX/QA/QB,

M2934RX/RA/RB, M2934CX/CA/CB

M2932 M2932SX/SA/SB, M2932HX/HA/HB, M2932QX/QA/QB,

M2932RX/RA/RB, M2932CX/CA/CB

M2949 M2949S, M2949Q, M2949E

M2952 M2952S, M2952Q, M2952E

M2954 M2954S, M2954Q, M2954E

Warning Indications

The following warning indications are shown in this manual to prevent the user and other

nearby persons or property from being injured or damaged.

Note “Note” indicates the most effective method of use or information that is of value to the

user.

Requesting for User’s Comments

Please use the User’s Comment Form attached to the end of this manual to identify user

comments including error, inaccurate and misleading information of this manual. Contact to

your Fujitsu representative for additional comment forms if required.

C141-E039-01EN ix

Manual Organization

Product Manual 1. Outline

2. Specifications

3. Data Format

4. Installation Conditions

5. Installation Procedure

6. Diagnosis and Maintenance

SCSI Physical

Interface Specifications

1. SCSI Bus

2. SCSI Messages

3. SCSI Bus Error Recovery Processing

SCSI Logical Interface

Specifications

(This Manual)

1. Command Processing

2. Data Buffer Management

3. Command Specifications

4. Sense Data and Error Recovery Methods

5. Disk Media Management

Maintenance Manual 1. Specifications and Equipment Configuration

2. Maintenance and Diagnosis

3. Troubleshooting

4. Removal and Replacement Procedures

5. Operating Theory

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fujitsu Magazzinaggio

Fujitsu

Fujitsu ETERNUS DX100 S4 Manuale tecnico

Fujitsu

Fujitsu MAS3184NC/NP Manuale utente

Fujitsu

Fujitsu MHS2030AT - 2.5" Notebook 30GB Drive Manuale utente

Fujitsu

Fujitsu MHT2060BH - Mobile 60 GB Hard Drive Manuale utente

Fujitsu

Fujitsu MHV2160BT Manuale utente

Fujitsu

Fujitsu ETERNUS DX60 S3 Manuale utente

Fujitsu

Fujitsu ETERNUS2000 100 Manuale utente

Fujitsu

Fujitsu ETERNUS DX100 S3 Manuale utente

Fujitsu

Fujitsu MHS2020AT Manuale utente

Fujitsu

Fujitsu ETERNUS AF650 S2 Istruzioni per il montaggio

Fujitsu

Fujitsu MPE3XXXAT Manuale utente

Fujitsu

Fujitsu ETERNUS DX60 Manuale utente

Fujitsu

Fujitsu MAX3036NC Manuale utente

Fujitsu

Fujitsu ETERNUS DX8100 S4 Manuale tecnico

Fujitsu

Fujitsu ETERNUS DX100 S4 Istruzioni per il montaggio

Fujitsu

Fujitsu MHY2200BS Manuale utente

Fujitsu

Fujitsu MPF3XXXAH Manuale utente

Fujitsu

Fujitsu ETERNUS JX40 S2 Manuale utente

Fujitsu

Fujitsu P3AM-5382-03ENZ0 Come usare

Fujitsu

Fujitsu C141-E282 Manuale utente

Fujitsu

Fujitsu MBA3300 NP SERIES Manuale utente

Fujitsu

Fujitsu ETERNUS DSP Series Manuale di istruzioni

Fujitsu

Fujitsu MAB3091FC Series Manuale utente

Fujitsu

Fujitsu MHX2300BT - Mobile 300 GB Hard Drive Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente