Fujitsu MAN3184 SERIES Manuale utente

C141-E123-01EN

MAN3184, MAN3367, MAN3735 SERIES

DISK DRIVES

SCSI PHYSICAL INTERFACE SPECIFICATIONS

This Product is designed, developed and manufactured as contemplated for general use, including

without limitation, general office use, personal use and household use, but is not designed,

developed and manufactured as contemplated for use accompanying fatal risks or dangers that,

unless extremely high safety is secured, could lead directly to death, personal injury, severe

physical damage or other loss (hereinafter “High Safety Required Use”), including without

limitation, nuclear power core control, airplane control, air traffic control, mass transport operation

control, life support, weapon launching control. You shall not use this Product without securing the

sufficient safety required for the High Safety Required Use. If you wish to use this Product for

High Safety Required Use, please consult with our sale person in charge before such use

The contents of this manual is subject to change without prior notice.

C141-E123-01EN i

FOR SAFE OPERATION

Handling of This manual

This manual contains important information for using this product. Read thoroughly before using

the product. Use this product only after thoroughly reading and understanding especially the

section “Important Alert Items” in this manual. Keep this manual handy, and keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering

damage to their property. Use the product according to this manual.

Functional Limitations

There may be certain functional limitations concerning the specifications and functions of the

products covered by this manual depending on the equipment version, especially concerning the

following functions.

Versions in which there functions can be used will be communicated through “ENGINEERING

CHANGE REQUEST/NOTICE”, issued by Fujitsu.

Function Equipment Version Which Supports These Functions

Equipment

Version No. EPROM

Version No. Standard INQUIRY Data Product

Revision (ASCII)

WRITE RAM Command These commands cannot be used in the current version.

READ RAM Command

(Proceed to the Copyright Page)

C141-E123-01ENii

Related Standards

Specifications and functions of products covered by this manual comply with the following

standards.

Standard (Text) No. Name Enacting Organization

T10/1302D Rev 14

(final) Working Draft

American National Standard Information

Technology --- SCSI Parallel Interface 3

American National

Standards Institute

(ANSI)

C141-E123-01EN iii

REVISION RECORD

Edition Date

published Revised contents

01 Mar.,2001

Specification No.: C141-E123-**EN

The contents of this manual is subject to

change without prior notice.

FUJITSU LIMITED

This page is intentionally left blank.

C141-E123-01EN v

PREFACE

This manual explains the MAN3184/MAN3367/MAN3735 series 3-1/2" intelligent disk drives each having

the built-in SCSI controller.

This manual details the specifications and functions of the Small Computer System Interface (SCSI) to

connect the above listed disk drives to the user system. Also, the manual details various SCSI command

specifications and the command processing functions, and provides the information required to creation of

host system software. This manual is intended to be used by the users who have the basic knowledge of

computer system operations.

The following lists the manual configuration and the contents of each chapter. The caution labels and

markings are also explained.

Manual Configuration and Contents

This manual consists of the following three chapters, and the terminologies and abbreviations sections.

Chapter 1 SCSI Bus

This chapter describes the configuration, physical and electrical requirements, interface protocol, and

other operations of the Small Computer System Interface (SCSI) which connects the

MAN3184/MAN3367/MAN3735 series intelligent disk drives to the user system.

Chapter 2 SCSI Messages

This chapter describes the type and explanation of messages defined for SCSI bus operations.

Chapter 3 ERROR Recovery

This chapter describes error recovery processing executed by the MAN3184/MAN3367/MAN3735 series

intelligent disk drives in response to various errors on the SCSI bus.

Glossary

This section explains the terminologies the reader must understand to read this manual.

Abbreviations

This section lists the abbreviated terms and their full words used in this manual.

C141-E123-01ENvi

CONVENTIONS

This manual uses the following conventions:

NOTE: NOTE indicates the information useful for the user to operate the system.

Important information

The important information is provided with the "Important" title. The important information text is

centered so that the reader can distinguish it from other manual texts. The following gives an example:

IMPORTANT

The IDD operates as a target (TARG) on the SCSI bus. The IDD is

called "TARG" in this chapter except when clear identification is

required.

Notations

A decimal value is indicated as it is in this manual.

A hexadecimal value is indicated in the X'17B9' or 17B9h or 17B9H notation.

A binary value is indicated in the notation similar to "010."

The disk drive model name has a different suffix depending on its SCSI electrical characteristics, capacity,

data format used during shipment and others. The following typical model name is used except when the

model needs to be distinguished. Also, the disk unit may be referred to as the "IDD" or "unit" in this

manual.

C141-E123-01EN vii

Note 1: Model name

M AN 3 184 MC

Interface type MP: Low-Voltage Differential, 16-bit SCSI Ultra-160m,

68-pin connector

MC: Low-Voltage Differential, 16-bit SCSI Ultra-160m,

SCA-2 connector

Formatted capacity (100 MB units)

Disk size

Type AN: 1-inch height (10,025 rpm)

Note 2: Typical model name

Type model name Model name

MAN3184 MAN3184MP, MAN3184MC

MAN3367 MAN3367MP, MAN3367MC

MAN3735 MAN3735MP, MAN3735MC

Requesting for User's Comments

Please use the User's Comment Form attached to the end of this manual to identify user comments including

error, inaccurate and misleading information of this manual. Contact to your Fujitsu representative for

additional comment forms if required.

C141-E123-01ENviii

MANUAL ORGANIZATION

Product/

Maintenance Manual • General Description

• Specifications

• Data Format

• Installation Requirements

• Installation

• Diagnostics and Maintenance

• Error Analysis

• Principle of Operation

SCSI Physical

Interface

Specifications

• SCSI Bus

• SCSI Message

• Error Recovery

SCSI Logical

Interface

Specifications

• Command Processing

• Data Buffer Management

• Command Specifications

• Parameter Data Formats

• Sense Data and Error Recovery Methods

• Disk Media Management

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fujitsu Magazzinaggio

Fujitsu

Fujitsu ETERNUS DX S5 Series Guida all'installazione

Fujitsu

Fujitsu PG-HD9G1C Manuale utente

Fujitsu

Fujitsu MBA3300 NP SERIES Manuale utente

Fujitsu

Fujitsu MAT3300FC Manuale utente

Fujitsu

Fujitsu PRIMERGY LTO3 Manuale utente

Fujitsu

Fujitsu MAX3147 NC SERIES Manuale utente

Fujitsu

Fujitsu Streamer DAT 160 Manuale utente

Fujitsu

Fujitsu ETERNUS DX Disk Manuale utente

Fujitsu

Fujitsu MHX2300BT - Mobile 300 GB Hard Drive Manuale utente

Fujitsu

Fujitsu MHU2100AT Manuale utente

Fujitsu

Fujitsu MHT2060BH - Mobile 60 GB Hard Drive Manuale utente

Fujitsu

Fujitsu FD-1100MT Manuale utente

Fujitsu

Fujitsu MPD3XXXAH Manuale utente

Fujitsu

Fujitsu ETERNUS DX60 Manuale utente

Fujitsu

Fujitsu MHY2200BS Manuale utente

Fujitsu

Fujitsu ETERNUS2000 100 Manuale utente

Fujitsu

Fujitsu MAT3300NC/NP Product/ Manuale utente

Fujitsu

Fujitsu MAX3036RC SERIES Manuale utente

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuale utente

Fujitsu

Fujitsu HARD DISK DRIVES MAW3073FC Manuale utente

Fujitsu

Fujitsu ETERNUS DX60 S3 Manuale utente

Fujitsu

Fujitsu PRIMERGY PG-DTA101 Manuale utente

Fujitsu

Fujitsu MHK2120AT - Mobile 12 GB Hard Drive Manuale utente

Fujitsu

Fujitsu ETERNUS AF250 S2 Istruzioni per il montaggio

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente