Fulterer FR 3610 Manuale utente

Step 1. Identify all parts.

Supplied Parts List

ADrawer Slide, left (cabinet, middle and drawer profile) with door front brackets.

BDrawer Slide, right (cabinet, middle and drawer profile) with door front brackets.

CBottom Mount Brackets (4 pieces).

D1 Connecting Bracket (3 pieces).

D2 Connecting Bracket with slot (3 pieces).

EE-Z-Close Package: 2 activators (L and R), 2 strikes, screws.

FTray (1 piece).

GWire Support (1piece).

Screw Package:

(g) M4 x 8mm, zinc (24 pieces).

(h) M4 Nut, zinc (8 pieces).

( i ) M4 x 8mm, zinc (11 pieces).

( j ) No. 8 x 5/8 in., zinc (10 pieces).

( k) No. 8 x 5/8 in., zinc (4 pieces).

( l ) No. 6 x 1/2 in., self-tapping, zinc (4 pieces).

( m) No. 8 x 1/2 in., self-tapping, zinc (4 pieces).

( n) Washer (2 pieces)

FR 3610 & FR 3609 Mounting Instructions

1 of 4(0708#145)

FR 3610

FR 3609

mm (in.)

Min. inside cabinet depth

575 (22.64)

Inside cabinet width

375–475

(14.75 –18.75)

mm (in.)

Min. inside cabinet depth

575 (22.64)

Inside cabinet width

292–475

(11.5 –18.75)

34L (36 qt.)

Waste Basket 34L (36 qt.)

Waste Basket

34L (36 qt.)

Waste Basket

Storage Bin

FR 3609 Single FR 3610 Double

E activator L

E activator R

Drawer Profile

FRONT

(g)

(i)

(m)

(g)

D1 FR 3610

Figure 2

FR 3610

Figure 1

Step 4. Attach connecting brackets D1 to drawer profile A and connecting brackets D2 to

drawer profile B using screws (g) as illustrated below in figure 2. (FR 3610 only)

Step 5. Connecting brackets D1 and D2 attach to each other with screws (i). Determine the position after deciding the width

of the tray F trim the tray to fit the cabinet opening. See figure 4 and 5 for minimum and maximum tray width.

Attach wire support (G) with washer (n) and screws (i) to tray (F) (FR 3610 only)

FR 3610 & FR 3609 Mounting Instructions

2 of 4(0708#145)

Cabinet Profile

E strike

(g)

(l)

(h)

7mm set back

from front of cabinet

(k)

(g)

(h)

(j)

Step 2. Attach E-Z-Close strikes with screws ( l) to brackets Cas illustrated below in figure 1. Attach E-Z-Close activators with

screws (m) to Drawer Profiles. L to A, R to B as illustrated in figure 2.

Step 3. Attach brackets Cto cabinet profile A left and B right with screws (g) and nuts (h) as illustrated below in figure 1.

FR 3610 & FR 3609 Mounting Instructions

3 of 4(0708#145)

E activator L

E activator R

Drawer Profile

FRONT

(g)

(i)

(m)

(g)

FR 3609

Step 4. (a) Attach connecting brackets D1 to drawer profile A and connecting brackets D2 to

drawer profile B using screws (g) as illustrated below in figure 2. (FR 3609 only)

Step 5. (a) Connecting brackets D1 and D2 attach to each other with screws (i). Determine the position after deciding

the width of the tray F trim the tray to fit the cabinet opening. See figure 4 and 5 for minimum and maximum

tray width. Attach wire support (G) with washer (n) and screws (i) to tray (F) (FR 3610 only)

Step 6. Determine the location of the adjustable door front brackets using diagram in figure 3 (see below).

Attach adjustable door front brackets to door front with screws ( j).

Step 7. Hook door front to fixed brackets on the slide, make all necessary adjustments and tighten all screws.

Step 8. Check alignment and function of E-Z-Close mechanism E (see figure 1).

240 (9.45)

FR 3609: 292 – 475 (11.5 –18.75)

FR 3610: 375 – 475 (14.75 –18.75)

Inside cabinet width

mm (in.)

100

(3.94)

102

118

134

Adjustable

Door Front Bracket

facing inward

Adjustable

Door Front Bracket

facing outward

64 (2.52)

75 (2.95)

910

Figure 2

FR 3609

Figure 3

Tray

Adjustable door

front bracket

max.

423mm

(16.65in.)

Tray width

Adjustable door

front bracket

Wire Support

Tray

min.

314mm

(12.36in.)

Tray width

(n)

(i)

mm (in.)

Tray

Adjustable door

front bracket

max.

423mm

(16.65in.)

Tray width

Tray

min.

248mm

(9.76in.)

Tray width

mm (in.)

Adjustable door

front bracket

FR 3610 & FR 3609 Mounting Instructions

4 of 4(0708#145)

Step 9. Mount cabinet profile A and B with attached brackets C to cabinet floor with screws ( j) and (k) use the drawer

profile / tray assembly as a gauge for distance and parallelism. Be sure that all drawer slide parts are running

freely and do not bind (see figure 1).

FR 3610

Figure 4

FR 3609

Figure 5

Questo manuale è adatto per i seguenti modelli

Altri manuali Fulterer Magazzinaggio

Fulterer

Fulterer FR 1535 Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente