Fun & Function SensaSoft MW7277 Manuale utente
SensaSoft™ Musical Lightup Hopscotch
MW7277
34136
October 2022
User Manual
2
Contents
Warnings
Description
Includes
Installation
Charging the Floor Pad
Panel Operation
Troubleshooting
Cleaning and Maintenance
FCC
Guarantee
Technical
Contact Us
3
3
3
4-6
7
8
9
9
9
10
11
11
3
*All our equipment is designed for users with special needs. We suggest supervision at all
times when using this equipment.
*For indoor use only. The panel uses a mains power supply.
*Do Not use free standing. The panel should be installed securely to the wall.
*Never use abrasive cleaning pads to clean this item.
Description
Hopscotch with a twist! Hop, skip or jump onto a colored square on the hopscotch pad, and activate a sensory
experience! A corresponding square lights up on the wall panel, and music begins to play. The SensaSoft
Musical Lightup Hopscotch can be activated through touch too. Use the pre-loaded selection of 64 nursery
rhymes and sound effects. It's an incredible way to engage kids and encourage movement!
Includes
Warnings
Floor Pad
8 pad remote
Carefully check you have all the parts listed. Inform us immediately if anything is missing.
Wall Bracket Power Cord
Touch Control Panel
Wall Panel
Display Window
Power Adapter
USB Floor Pad Charge Cord
4
Installation
This equipment connects to a power supply. The wall panel is designed to attach to the wall at a
convenient height for the users. DO NOT use as standalone equipment. The Floor Pad sits on the
floor in front of the wall panel. Both pieces of equipment should be installed in a dry area (indoor
only).
Hanging the Wall Panel
Wall Panel Rear
Wall Bracket
Mirror Plates
Wall Bracket
TOP
Screw to wall through the holes.
Holes on the underside of the bracket
The wall panel must be attached to the wall using the supplied brackets. A six-inch speaker is located in
the front of the wall panel. Do not cover the speaker. This would drastically reduce the volume output of
the speaker. The wall panel uses a mains electrical supply reduced to safe low voltage. Make sure
your power supply is within 39 inches of the wall panel. We suggest the power supply is placed
within the electrical ducting or cable trunking.
• Attach the wall bracket to wall.
• Use screws and anchors appropriate for the type of wall construction where the
equipment will be hung. The wall panel weighs 68 lbs.
•Professional installation is recommended.
• Make sure the panel is high enough for the users.
• The electrical outlet should be to the left of the wall panel (viewing from the front).
Step 1
Important:
Due to the weight of the wall panel, it
is essential the wall bracket is attached
to the wall with appropriate hardware.
Installation should be completed by a
professional installer.
The wall panel is fitted with
brackets on the rear of the panel.
A wall bracket and 2x mirror plates.
5
Wall Bracket
Step 2Lift the panel onto the wall bracket. Hook the bracket located on the back of the
panel onto the wall bracket.
Note: Lift gently and set slowly into place. Make sure the brackets are securely
connected.
Step 3
Attach screws to wall the mirror plate holes.
Drill holes into the wall and use appropriate hardware (wall anchors) to screw the panel
onto the wall. The bottom brackets stop the panel from being lifted off the wall bracket.
Connect the power adapter and plug the power cord into the electrical outlet.
6
Step 4
Power Cord and Adapter
Floor Pad Set Up - Charging
Typical USB Charger UK version
Shown ( Not Supplied )
USB Charger Cord
The Floor Pad uses wireless remote technology to operate the wall panel. It comes with a
rechargeable battery that is charged using the supplied USB cord. A standard smartphone
charger is used to charge the pad (please make sure the USB port on the charger is compatible
with the USB cord). The pad automatically turns off after inactivity. The charge should last for
approximately 8 hours when in continual use.
Please charge overnight before using for the first time.
Charging the Floor Pad
Place the pad on a flat surface. Locate the zipper around the edge of the pad
Zipper
1) Open the zipper to half way across the
pad where you will find the charging socket
in the plastic cover behind the zipper.
After charging,
do not forget to close the zipper.
2) Plug the USB Lead into pad and
into charger.
3 ) Plug into an electrical outlet
Charging Socket
7
Panel Operation
The Musical Lightup Hopscotch uses a touch sensitive control panel where every function can be changed.
When turning on the display, the panel will show the last display used. For demonstration purposes, we will
use the sound bank menu.
When turning on or touching the standby button, the splash screen will display and then move on to the
Sound Bank Menu.
There are eight banks of eight sounds (64 total) to choose from. Touch one of the buttons to choose a
sound bank. Each bank has a range of sounds.
Bank 1 - Counting
Bank 2 - Piano Chords
Bank 3 - Bells
Bank 4 - African Chime
Bank 5 - Drums
Bank 6 - Cartoon
Bank 7 - Human
Bank 8 - Animals
Hopscotch
Splash Screen Sound Bank Menu
8
When pressing one of the buttons, another menu
will display giving the option to change volume or
the brightness of the display.
9
Cleaning
• We suggest a quick wipe every day after use . A more rigorous cleaning can be completed once a week.
• Before you start to clean unplug the equipment from the electrical outlet.
• To clean your SensaSoft™ Musical Lightup Hopscotch, use a soft, lint free white cloth and mild detergent
such as dish washing liquid.
• Never use an abrasive cloth or any solvent liquid such as mineral spirits or bleach. The light panel can
become damaged if appropriate cleaners or cloths are not used.
Maintenance
Your Hopscotch requires no maintenance further than a visual inspection for a damaged front panel or
case. Periodically, check all wall hardware and ensure the panel is secure. Make sure all electrical cords
are not damaged and still intact.
Information about products that generate electrical noise
USA and Canada
This device complies with FCC and industry Canada RF radiate exposure limits set forth for general
population. It must not not be colocated or operating in conjunction with any other antennas or
transmitters. This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: 1 This device must accept any interference received, including interference that may
cause undesired operation.
This equipment compiles with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. Should problems occur reorient or relocate the receiving antenna. Increase the separation
between the equipment and the receiver. Connect to a power outlet on a circuit different from that to
which the receiver is connected.
Troubleshooting
Q - My Hopscotch display is completely blank and nothing lights up.
A - Make sure the power supply is switched on and the power cord is plugged into the electrical outlet.
If this still does not work, unplug the panel and check the fuse in the plug.
Q - The LEDs are lighting but no sound is coming from the speaker.
A - Make sure the volume is turned up.
Q - The sound was working but it has turned off .
A - Like all electronic programs that rely on software and firmware they sometimes hang up. Disconnect the
power supply for 30 seconds and power back up. If the problem persists, contact Fun and Function.
Q - The LEDs were lighting but they have turned off.
A - Like all electronic programs that rely on software and firmware they sometimes hang up. Disconnect the
power supply for 30 seconds and power back up. If the problem persists, contact Fun and Function.
Q - The Floor pad will not activate any sounds and the LED windows are not lighting.
A - If the touch pads on the wall panel are working, make sure the floor pad is plugged into the wall panel.
10
CONDITIONS OF GUARANTEE
This guarantee is in addition to and does not in any way affect any statutory or other rights of
consumer purchasers .If within the applicable guarantee period (as shown in 8 below) the
appliance proves to be defective by reason of faulty design, workmanship or materials, we
undertake subject to the following conditions to have the defective appliance (or any part or
parts thereof) repaired or at our discretion replaced free of charge.
1. The appliance shall have been purchased and used solely in accordance with Standard
operating instructions and the technical and/or Safety Standards required in the country where
this appliance is to be used
2. All enquiries must be through such dealers .For appliances used in the UK., U.S.A.,
Channel Islands, Isle of Man, and Republic of Ireland the appliance should be returned
together with this guarantee and proof of purchase promptly on being found defective, at the
purchasers risk and expense, to the authorised dealer from whom the appliance was purchased.
3. This guarantee shall not apply to damage caused through fire, accident, misuse, Wear
and tear, neglect, incorrect adjustment or repair, to damage caused through where this
appliance is used, or to damage occurring during Installation, adaptation, modifications, or use
in an improper manner or inconsistent with the technical and/or safety standards required in the
country transit to or from the purchaser.
4. If at any time during the guarantee period any part or parts of the appliance are replaced
with a part or parts not supplied or approved by us or of an objective quality safe and suitable for
the appliance, or the appliance has been dismantled or repaired by a person not authorised by
us, the purchaser shall not be entitled to any rights and/or remedies under this guarantee.
5. The purchaser sole and exclusive remedy under this guarantee against us is for the repair
(or at our discretion the replacement) of the appliance or any part or parts and no other remedy,
including, but not limited to, incidental or consequential damage or loss of whatsoever nature
shall be available to the purchaser.
6. This guarantee shall not apply to lamps, batteries, color filters, cabinet parts or any other
parts of a limited natural life.
7. Our decision on all matters relating to complaints shall be final. Any appliance or
Defective part which has been replaced shall become our property until paid for in full.
8. The guarantee period applicable to all new appliances shall be 24 months.
Guarantee
Indice
Altri manuali Fun & Function Attrezzatura di illuminazione
Fun & Function
Fun & Function SP7172 Manuale utente
Fun & Function
Fun & Function SP7198 Manuale utente
Fun & Function
Fun & Function SK7393 Manuale utente
Fun & Function
Fun & Function SP8371 Manuale utente
Fun & Function
Fun & Function CF7167 Manuale utente
Fun & Function
Fun & Function SP7210 Manuale utente
Fun & Function
Fun & Function SP7193 Manuale utente
