Furuno MU-170C Manuale

Altri manuali per MU-170C

2

Altri manuali Furuno Monitor

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione

LG

LG M1950D-PZ Manuale utente

1

MULTI-PURPOSE LCD DISPLAY

MU-170C

Operator’s Guide

The purpose of this guide is to provide the basic operating procedures for this equipment. For

more detailed information, see the Operator’s Manual.

Display Unit

Remote Controller

LED Optical sens

or

VIDEO2

VIDEO1

BRILL +

RGB1 RGB2

MENU

VIDEO3

DVI

PIP1 PIP2 PIP3

Key Function

STWX Select menu item.

MENU Shows the main menu.

BRILL Shows the BRILL adjustment

window.

DISP Shows the DISPLAY selection

window.

PIP Shows the PIP selection window.

Turns the power on or off.

LED

Changes color according to signal

status as below.

• Green: The selected signal to be

displayed is input correctly from

the external device.

• Orange: The selected signal to be

displayed is not input from the

external device.

Optical

sensor Receives the signals from the

remote controller.

Key Function

RGB1 Shows picture input to RGB1.

RGB2 Shows picture input to RGB2.

DVI Shows picture input to DVI.

VIDEO1 Shows picture input to VIDEO1 on

the entire screen.

VIDEO2 Shows picture input to VIDEO2 on

the entire screen.

VIDEO3 Shows picture input to VIDEO3 on

the entire screen.

PIP1 Shows picture input to VIDEO1 in

the picture-in-picture window.

PIP2 Shows picture input to VIDEO2 in

the picture-in-picture window.

PIP3 Shows picture input to VIDEO3 in

the picture-in-picture window.

BRILL (-) Decreases the display brilliance.

BRILL (+) Increases the display brilliance.

MENU Shows the main menu.

STWX Select the menu items.

2

Adjusting Display Brilliance

1. Press the BRILL key on the display unit

to show the BRILL adjustment window.

2. Press the Wor Xkey to adjust the

brilliance (available range: 1 to 50).

You can also adjust brilliance by

pressing the BRILL key continuously.

3. Press the Sor Tkey to close the

window.

Choosing Source for Main

Picture

1. Press the DISP key to show the DISP

selection window.

2. Press the Sor Tkey to select a signal.

You can also select the signal by

pressing the DISP key continuously.

RGB1-2: The signal from the chosen

RGB port is displayed.

DVI: The signal from the DVI port is

displayed.

VIDEO1-3: The external video from the

chosen VIDEO port is displayed on the

entire screen.

3. Press the Wor Xkey to close the

window.

Choosing Source for Picture-in-

Picture

1. With the RGB1, RGB2 or DVI display

shown, press the PIP key to show the

PIP selection window.

2. Press the Sor Tkey to select the

VIDEO port desired.

VIDEO can also be selected by pressing

the PIP key continuously. To turn off the

picture-in-picture window, choose OFF.

3. Press the Wor Xkey to close the

window.

OSE-20340-A