FUTUR Trident Mini Manuale utente

AIR PURIFIER (MINI)

INSTRUCTION MANUAL

CONTENTS

Product & Accessories

Packing List

Parameter Informaon

Product Working Principle

Use Instrucons

Wi-Fi Connecon

Air Quality Display

Safety Precauons

Daily Cleaning & Maintenance

Common Troubleshoong Methods

REPAIR TIPS ENVIRONMENTAL IMPACT

STATEMENT

1. All the packaging materials are environmentally friendly and

recyclable. Please dispose of these packaging materials in an

environmentally friendly manner to maintain a good environment.

2. Do not allow children to play with the plasc ﬁlms and cartons,

which may cause a room-breathing accident, so please keep

packaging materials away from children.

3. It should be discarded when the old air puriﬁer cannot be used.

Please dispose of it as it cannot be reused before discarding. The

old one contains useful materials that can be reused. Please assist

in proper disposal or recycling to contribute to environmental

protecon.

Please read this user manual carefully to ensure correct

and safe use of this product.

Only the personnel trained and qualiﬁed maintenance for

air puriﬁer can repair the device.

Other personnel are not allowed to repair the air puriﬁer

without permission, so as to avoid serious consequences.

When the air puriﬁer is abnormal, please refer to the

Common Faults Analysis and Exclusion.

If you can't troubleshoot the fault, please unplug the wire

and cut oﬀ the power, then contact us. Any product quality

or inconvenience caused by the device can be obtained from

the local merchant customer service center consultaon and

services.

• Before using, please remove the packing bag of the ﬁlter in the puriﬁer.

• For the removal and installaon method of the ﬁlter, please refer to "Daily Cleaning & Maintenance" on page 7.

TIPS

PRODUCT & ACCESSORIES

DESIGNAIR PURIFIFIER



















1. Air Outlet Grid

2. Control Panel

3. PM2.5 Indicator

4. VOC Indicator

5. VOC Sensor Cover

6. PM2.5 Sensor Cover

7. Air Inlet

8. Wheels

9. Filter Cover (back)

Aluminum Mesh Filter

Electrostac Filter

Ozone Decomposion Filter

Cold Plasma

PACKING LIST

PARAMETER INFORMATION

Rated Voltage 220V

Rated Frequency 50Hz

Rated Power 60W

PM CADR 600m3/h

Lifespan 10 Years

Coverage Area 32-74m2 (340-800 sq. )

Name

Air

Puriﬁer

Aluminum

Mesh Filter

(inside)

Electrostac

Filter (inside)

Ozone

Decomposion

Filter(inside)

Cold Plasma

(inside)

Manual

1pc 2pcs 2pcs 2pcs 1pc 1pc

Q’ty





  













   

1. ON/OFF:

The icon lights up red when the power is on, and press the buon

to turn on/oﬀ respecvely. When the machine is turned on, all

keys light up white.

2. AUTO/SLEEP:

Short press for auto mode, the buon and "AUTO" are fully lit;

long press 3 seconds for sleep mode, the buon and "SLEEP" are

all on, at the same me, all display lights on the panel and machine

are in oﬀ state.

3. AIRFLOW: Short press the buon and switch to speed

1~2~3~4, icon 3 and icon 8 display correspondingly at the same

me; the PM2.5 display will be restored aer 5 seconds.

USE INSTRUCTIONS

High-voltage electrostac adsorpon is through the electrostac

adsorpon device under the acon of a high-voltage generator

can generate 4KV-8KV DC high voltage and form a strong

electrostac ﬁeld inside the electrostac adsorpon device.

When the indoor air passes through the electrostac adsorpon

device, the parculate maer in the air (including

microorganisms) is instantaneously polarized and charged with

posive and negave charges due to the high-speed impact of

posive and negave electrons when passing through the

electric ﬁeld. The charged parcles aract each other due to the

opposites when running in the electric ﬁeld. The negavely

charged parcles will shi to the anode plate, and the posively

charged parcles will shi to the cathode plate, causing the

charged parcles to collide with each other in moon. The

posive and negave charges will also discharge at the moment

of collision and release a large amount of energy to destroy the

cell wall and electrolyte of virus and bacteria, so as to achieve the

purpose of disinfecon and sterilizaon.

Home, oﬃce, school, hospital, food, catering, etc

PRODUCT WORKING PRINCIPLE

1. Sterilizaon Principle:

2. Applicaon:

Airﬂow Display

Timing Display

Filter Reset

Wi-Fi Connecon Display

Display Window











4.TIMING/CHILD LOCK:

Short Press and switch to ming mode, and then shi to

1~2~4~6~8H,icon 4 and icon 9 display correspondingly. The

PM2.5 display will be restored aer 5 seconds. Press long for 3

seconds to switch to child lock mode, buon and "CHILD LOCK"

are all on, the machine gives a "beep" prompt sound, and other

keys fail. Press long for 3 seconds to release.

5. UVC:

Short press for uvc sterilizing mode, buon and "UVC" are all on.

Press again to disable.

6. WIFI/RESET:

Press the buon for 3 seconds to enable the wiﬁ network

conﬁguraon mode, icon 6 and icon 11 blink simultaneously,

the “WIFI” icon is steady on aer the network is conﬁgured

successfully. When the ﬁlter remaining me is less than 15%, icon

10 and “RESET” are blinking at the same me. Press the buon for

5 seconds, and machine will give a "beep" prompt sound, the ﬁlter

is reset successfully. Icon 10 will be lit up, number "038" will be

displayed as "100" (i.e. full) and PM2.5 display will be restored

aer 2 seconds.

WI-FI CONNECTION

7. DISPLAY WINDOW

8. AIRFLOW DISPLAY

9. TIMING DISPLAY

10. FILTER RESET

11. WIFI CONNECTION DISPLAY

DOWNLOAD AND REGISTRATION

1. Scan the QR code to download "Smart Life" APP. You can also

search "Smart Life" in either APP store or Google Play to install

the APP.

2. Open the "Smart Life APP", tap "Register" to register a "Smart

Life" account with your phone number or E-mail. Then sign in

the APP.

3. Open the "Smart Life APP", click "add device" or tap "+" on the

top right corner of the APP homepage. There are two methods

to enter the page of "add device" -Add WiFi manually or search

for the devices automacally.

In the homepage of add device manually, choosing any one of

product rang to enter a new homepage and ensure the indicator

light ﬂash quickly.

The devices provide two conﬁguraon methods. In the homep-

age of Easy mode, tap “Other methods” on the top right corner to

enter Easy mode and AP mode, then could choose one of mode

to connect with WiFi.

Make sure your smart device is energised and your mobile phone

is connected to your WiFi network. If the WiFi indicator of smart

device do not ﬂash, please press the center buon of the light

ring for more than 5 seconds unl the indicator light keeps

ﬂashing quickly, it means the device is ready for conﬁguraon.

1.Use only two-pin sockets that conform to the standard voltage

on the nameplate.

2.Do not use this product when the power cord, plug and power

socket are damaged.

3. When unplugging the power, you must hold the plug instead

of pulling the power cord, otherwise it may cause electric shock

or ﬁre due to short circuit.

4. Clean the dust on the power plug regularly.

5. If the power cord is damaged, it must be replaced by the

manufacturer or professional maintenance personnel.

1. Do not use the machine without installing the ﬁlters.

2. Do not insert ﬁngers or other things into the air inlet or outlet.

3. Do not block the air inlet/outlet.

4. Do not close to or put on heat source objects (such as heang

stove and other places that may contact with ﬂammable gas).

5. If there is any smoke, odor and other malfuncons, should pull

out the power plug immediately.

1. Do not use if there is oil residue, smoke, ﬂame when lighng

up a cigaree, or chemical odor in the air.

2. Do not use the machine in an environment full of ﬂammable

gases such as hydrogen, natural gas, propane, etc. to avoid

electric shock, ﬁre and other damage.

3. Do not use this unit when using inseccide spray.

4. Do not use it in unstable places such as easy dumping,

hot,humid and wet places such as bathrooms, in order to avoid

electric shock, ﬁre or other damage.

1. When moving, stop running and pull out the power plug.

2. When moving, hold the handle on the side of the machine ;

don’t hold the front panel, lest the machine fall and injure people.

The PM2.5 indicator light above the front panel of the machine

shows diﬀerent colors according to the current PM2.5 status:

•Blue: Excellent •Green: Good

•Yellow: Moderate •Red: Poor

Meanwhile, the display window on the control panel will display

the current PM2.5 value synchronously.

The VOC indicator light under the front panel of the machine

shows diﬀerent colors according to the current status of gaseous

pollutants:

•Blue: Excellent •Green: Good

•Yellow: Moderate •Red: Poor

AIR QUALITY DISPLAY

SAFETY PRECAUTIONS

About Power

In use

Service Restricons

About Moving

1. Do not clean ozone lter and composite hepa lter by water.

2. Caution should be taken when cleaning the machine, as strong

corrosive cleaners will damage the machine surface.

3. Only use soft cloth to clean the machine surface, otherwise it may

be damaged or broken, and may cause sensor failure.

4. Do not use alcohol or organic solvents to wipe the product, or it will

cause damage or electric shock,re, etc.

5. When cleaning or not using the machine, please unplug the power

from the socket, otherwise it may cause electric shock or re due to

short circuit.

1. The host cannot start if the front panel is not installed correctly.

2. Do not install near the sensors directly to the tuyere, otherwise it

may aect the normal operation of the machine.

3. Do not install near objects (such as curtains, etc.) that may contact

with the air inlet or outlet, otherwise the object may get contaminat-

ed or cause this unit to malfunction.

4. Do not install the unit where it may be directly exposed to conden-

sation. Please use it at room temperature of 0-40 degrees.

5. Do not install in the place that will produce black smoke (such as

kitchen, etc.), otherwise it may cause the machine surface to crack or

sensor failure.

1. There should be a certain space around the machine to let the air

ow naturally, so as to improve the purication eect.

2. This machine is not suitable for the disabled, the perceptual

disturbance, the mentally handicapped or children to operate

by themselves.

Clean the Top Outlet and Inlet Grille

1. Use a so brush to remove dust and debris.

2. If necessary, use a slightly wet paper or cloth to remove large

deposits, and do not use any irritang abrasives or cleaning

pads on any parts of the equipment.

Clean VOC Sensor

The VOC sensovr is located in the middle right side of the

machine, above the air inlet grille.

1. Use a so cloth to clean dust and debris around the

VOC sensor to maintain accurate smell idenﬁﬁcaon.

2. Do not modify or open the VOC sensor, and do not spray in

or near the grille opening above the VOC sensor, which may

cause sensor and warranty failure.

DAILY CLEANING & MAINTENANCE

Noce for Cleaning

About Installaon

Warm Reminding

Cleaning Dust Sensor

1. Open the sensor cover

2. Use a wet coon swab to clean the lens, air inlet and air outlet.

3. Use a dry coon swab to remove residual water stains of the

dust sensor.

• The dust sensor needs to be cleaned regularly (approximately

every two months) for the machine to operate eﬃciently.

• The dust sensors needs to be cleaned more frequently if the

machine is placed in areas where dust accumulates.

• Do not use the swab on any part or area other than

the dust sensor.

Guidance for Cleaning Ozone Decomposion Filter

Use a vacuum cleaner or cloth to remove dust and ﬂuﬀ.

Recommend cleaning the ﬁlter me is about 8-12 years

(this replacement cycle greatly varies from diﬀerent

environments)

Guidance for Cleaning Aluminum Mesh Filter

The aluminum mesh ﬁlter collects large parcles and should be

cleaned at least once every two months depending on the using

environment.

1. Use a vacuum cleaner or ssue to remove dust or ﬂuﬀ.

2. Wash with soap water.

3. Thoroughly rinse and remove soap residue from the ﬁlter.

4. Dry the ﬁlter.

Cleaning Electrostac Filter

1. Take out the electrostac ﬁlter

2. Spray with neutral detergent and let stand for 5-10 minutes.

3. Shake well in warm water (under 40 degrees) and get out.

4. Repeat step 2 and 3 unl it is clean.

5. Rinse the dirt on the dust collector with warm water.

6. Use a hair dryer or dry the ﬁlter in the sun.





  

Sequence of Filter Installaon

Aluminum mesh ﬁlter (washable)

Electrostac ﬁlter (washable)

Ozone decomposion ﬁlter (unwashable)

*Plasma Tube (Recommended to replace

every 2 years)

Filter Assembly

This puriﬁer is equipped with 7 diﬀerent

pre-assembled ﬁlters. When the ﬁlters

should be replaced or cleaned, please

install the back cover aer the ﬁlters

are assembled.









Whole Machine Cleaning

Clean with a damp sponge or cloth

Do not immerse the air puriﬁer in water

Do not disassembly ﬁxed parts for cleaning

The air outlet with odor

The eﬀect of dust

removal and puriﬁcaon

are not obvious, and

the air quality is not

signiﬁcantly improved.

Too much noise

when running

The ﬁlter can’t ﬁt in

The machine won't

turn on

Motor abnormalies

Motor turns plugging/

motor overheat protecon,

machine prompts, and

does not work

There are many polluon

sources in the room

It is suggested that the room

be venlated by opening

the window.

The ﬁlter is heavily polluted

The machine has no ﬁlter Install the ﬁlter

Clear the blockage or

move somewhere else

The ﬁlter is too dirty

Sundries in machine

The ﬁlter is inversely

installed

Filter cover or ﬁlter

not installed properly

Whether the installaon

is not ﬁrm enough

Clean or replace the ﬁlter

Remove debris

Adjust the ﬁlter in the correct

direcon and align it with the

boom slot

1.Re-install the cover and ﬁlter

2.Contact aer sales

service center

1. Unplug, cool for 1-2 hours

and reconnect

2.Contact aer sales

service center

Contact aer sales

service center

The machine is placed in a

narrow place or there are

obstacles nearby, which

aﬀect the puriﬁcaon eﬀect

Replace a new ﬁlter

Cleaning of Condenser Mesh

1.Gently unscrew the quartz condenser.

2.Remove the OUTSIDE MESH of the condenser : if it seems to be

diﬃcult, rotate the net slightly on the quartz condenser.

3.Clean the quartz condenser by using a moist cloth. WARNING :

Do not use detergents, soaps or similar products.

4.Check whether the condenser shows any cracks or other damage.

If so, replace it.

5.As soon as a whish layer appears on the metal grill inside the

condenser, it means the condenser should be replaced.

6.Reposion the metal mesh on the condenser, placing it over the

internal grill. WARNING : Leave a minimum distance of 6-7mm

from the boom of the condenser.

7.Check that SPRING TAB touches the metal MESH OUTSIDE and

pushes in against the glass of the quartz condenser.

COMMON TROUBLESHOOTING

METHODS

Mesh

Condensor

Base in PVC

6-7 mm

GAP

MALFUNCTION POSSIBILITY METHOD

Indice

Altri manuali FUTUR Purificatore d'aria

FUTUR

FUTUR FTL-002-WHT Manuale utente

Manuali Purificatore d'aria popolari di altre marche

IKEA

IKEA UPPÅTVIND Manuale utente

Nash

Nash AP-1 PureSmart Manuale utente

LG PH-U450 Series Manuale utente

DeLonghi

DeLonghi DDSX 220WFA Manuale utente

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuale utente

Sharp

Sharp FU-40SE Manuale utente

Philips

Philips AC2721 Manuale utente

Hitachi

Hitachi EP-A3000 Manuale utente

TruSens

TruSens Z-2000 Manuale utente

Motorola

Motorola MBP87SN Manuale utente

Beko

Beko ATP 7100I Manuale utente

Carrier

Carrier INFINITY 1620 Manuale utente

AtmosAir

AtmosAir P2002 Manuale utente

Winix

Winix NK300 Manuale utente

Friedrich

Friedrich C-90A Istruzioni per l'uso e l'installazione

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuale utente

Base aire

Base aire 555 Pro Manuale utente

Champion

Champion CP25 Manuale utente