FUTUREROBOT E300 Series Manuale di riferimento
E300 Series Fanless Embedded Computer
1
Introduction
Copyright Statement
All documents, drawing, data and other contents in this User Manual are owned by Future Robot
Technology Co., Limited, all rights reserved.
All specifications and applications are subject to change without prior notice
Safety Instruction
1. Please read this safety instruction carefully
2. Please keep this User Manual for future reference
3. Please unplug power line before clearing with wet duster cloth. Do not use liquid or
decontamination sprays to clean equipment.
4. Please do not use the equipment in damp environment
5. Please ensure placing equipment on flat surface before installation, accidental drop may
cause damage to the equipment.
6. Before connecting the equipment with power supply, please confirm the voltage meets
requirement.
7. If you do not use equipment for a long time, please disconnect from power supply to avoid
excessive voltage fluctuations
8. Please avoid any liquid in case of fire or short circuit.
9. Please call for professional support with following situations:
Damage of power line or plug
Liquid inflow into the equipment
Exposure to excessive moisture working environment
Drop or damage of Equipment
10. Please do not place the equipment in the environment beyond recommended
temperature range, or it may cause damage to equipment.
11. The computer is equipped with a real-time clock circuit powered by the battery. If
the battery is not replaced correctly, there will be a risk of explosion. Therefore,
only the same or the same type of battery recommended by the manufacturer can
be replaced. Please follow the manufacturer's instructions to dispose of the used
battery.
2
12. Note: any unproven component may cause accidental damage to the equipment.
To ensure correct installation, only use the parts provided in the accessory box,
such as screws.
Warning and notice
Warning！
During operation, users shall pay special attention to the warning information in this
manual to avoid injury.
Notice！
The notes in this manual help users to avoid hardware damage or data loss, such as the
risk of exploding if the battery is not replaced correctly. Therefore, you can only replace it
with one or the same type of battery recommended by the manufacturer. Please follow the
manufacturer's instructions to dispose of old batteries.
Safety Precautions
Follow these simple precautions to protect yourself and your device from harm and
damage.
To avoid electric shock, please do not touch the main board and any parts before power
off.
Power supply must be disconnected before any parts is replaced, otherwise sensitive
components will be damaged due to excessive power when connecting jumpers or
installing other components.
E300 Series Fanless Embedded Computer
3
Table of Contents
Chapter 1 Overview ............................................4
1.1 Brief Introduction ..............................................................................................................................4
1.2 Specification ......................................................................................................................................5
1.3 Dimension..........................................................................................................................................6
1.4 LED Indicators...................................................................................................................................7
Chapter 2 I/O Interface .........................................8
I/O Instruction..........................................................................................................................................8
2.1 Power Button .........................................................................................................................9
2.2 Power Input Interface.............................................................................................................9
2.3 DisplayPort............................................................................................................................9
2.4 HDMI Port...........................................................................................................................10
2.5 USB Port..............................................................................................................................10
2.6 Ethernet (LAN)....................................................................................................................10
2.7 Audio....................................................................................................................................11
2.8 Serial Port (COM)................................................................................................................11
2.9 TF Card................................................................................................................................12
2.10 WiFi/4G Antenna (Optional)..............................................................................................12
2.11 Clear CMOS.......................................................................................................................12
2.12 Build-in 5V/12V Power Interface (5VCONN/12VCONN)...............................................13
2.13 Build-in Remote switch interface(CONN_EXT_BTN).....................................................13
Chapter 3 Operating Instruction .................................14
3.1 Unpacking Check.............................................................................................................................14
3.2 Operation Environment....................................................................................................................14
3.3 Getting Started.................................................................................................................................14
3.4 Installation .......................................................................................................................................14
Chapter 4 BIOS Setup Instruction................................16
4.1 BIOS Introduction............................................................................................................................16
4.1.1 CMOS Setup.....................................................................................................................16
4.1.2 Function Key and Instruction............................................................................................17
4.2 Main Menu.......................................................................................................................................18
4.3 Main (standard CMOS function setting)..........................................................................................19
4.4 Advanced (advanced BIOS function setting)...................................................................................19
4.5 Chipset(chipset function setting) .....................................................................................................21
4.6 Security (administrator/user and password).....................................................................................22
4.7 Boot..................................................................................................................................................23
4.8 Save&Exit........................................................................................................................................24
4
Chapter 1 Overview
1.1 Brief Introduction
E300 Series ultra-compact embedded computer are based on Intel Apollo Lake processor, with
optimum I/O design to fulfill multi connection requirements. Reinforced aluminum alloy enclosure
design is ideally suitable for steady performance in hash industrial environment.
E300 Series has unique expansion design to go through PCIe/USB/SPI/I2C/LPC connections to
expand and achieve rich and effective customization.
E300 Series intelligent and powerful embedded computer supports wide range of applications and
easy arrangement and deployment, it has excellent performance in Intelligent Transportation,
Facility Management, Industrial Automation and Internet of Things.
E300 Series Fanless Embedded Computer
5
1.2 Specification
P/N
E300 series
E310 series
CPU
Intel Apollo Lake N3350/N4200/J3455/E3900 Series processor
Memory
Onboard 2GB DDR3L upto 8GB
Display
1x DP, Max.4096 x 2304 @ 60Hz
1x HDMI, Max.4096 x 2304 @ 24Hz
HDMI+DP independent display
Audio
Realtek ALC662, High Definition Audio. Line-out, Mic-in
Ethernet
1x RTL8111H GbE, support Wake
On Lan
1x RTL8111H GbE, support Wake On Lan
2x Intel i211 GbE, support Wake On Lan
Serial Port
1 x RS232 (optional)
2 x RS232, 2 x RS485
USB
2 x USB3.0, 2 x USB2.0
2 x USB3.0,3 x USB2.0 ( 1x USB2.0
internal)
Mini-PCIe
-
1xFull Size for WLAN/WWAN module
SIM Card
-
1 x USIM for 3G/4G LTE communication
M.2 E Key
1 x M.2 E Key for WLAN
-
eMMC
8GB upto 256GB
TF-Card
1x TF slot
SATA3.0
-
1 x SATA3.0 for 2.5”HDD
Power Supply
24W AC-DC power adaptor
12~32V DC-input
OS
Windows 10 64 Bit, Linux
Enclosure
Aluminum Alloy
Mounting
Wall Mounting
Dimension
120 x 101 x 39.5mm (LxWxH)
120 x 101 x 51mm (LxWxH)
Weight
0.57kg
0.65kg
Operation
Temperature
-20°C~ 60°C, airflow 0.7m/s
Storage
Temperature
-40°C~80°C
Relative
Humidity
95% @ 40 (Non-Condensing)
ESD
Contact +/-4 KV, Air+/-8 KV
EMC
CE/FCC
Table 1-1: Specification
6
1.3 Dimension
Dimension for E300 series Fanless Embedded computer, all units are in millimeters (mm).
Figure 1-1: Top view
Figure 1-2: Side view
E300 Series Fanless Embedded Computer
7
Dimension for E310 series Modular Fanless Embedded computer, all units are in millimeters (mm).
Figure 1-3: Side view
1.4 LED Indicators
Icon
Color
Status
Description
Blue
Power
Power off: Off
Power on: On
Green
SATA HDD test
With HDD: light on
Operating: blink
No HDD: light off
Green
Standby Indicator
Standby: blink
Operating: light off
Table 1-2: LED Operation Indicators
8
Chapter 2 I/O Interface
I/O Instruction
I/O connectors on front, rear and side panel of E300 series. *mark is specific for E310 series.
Figure 2-1: Front Panel I/O
Figure 2-2: Rear Panel I/O
WiFi/4G(optional)
Figure 2-3: Side Panel I/O
E300 Series Fanless Embedded Computer
9
2.1 Power Button
The power button is a non-latched push button with a blue LED indicator. System is turned on when
button is pressed, and the power LED lit. If the system hangs, depressing the button for 5 seconds
powers down the system.
Figure 2-4: Power Button
2.2 Power Input Interface
E300 series DC jack 12V Power input, E310 series 12~32V 3pin phoenix.
Figure 2-5: 12V DC input jack
Figure 2-5: Phoenix DC input
2.3 DisplayPort Connector
One DisplayPort connector on the rear panel supports for resolutions Max. 4096 x 2304 @ 60Hz.
10
Figure 2-7: DisplayPort Connector
2.4 HDMI Port
One HDMI port on the rear panel supports for resolutions Max. 4096 x 2304 @ 24Hz.
Figure 2-8: HDMI Port
2.5 USB Port
2xUSB2.0, 2xUSB3.0 supporting plug and play which allow users connect or disconnect any time,
no need to shut off the computer.
Figure 2-9: USB port
2.6 Ethernet (LAN)
One Ethernet port on the rear panel support with Intel i210 GbE controller for E300.
Three Ethernet ports on front and rear panel with one RTL8111H GbE and two Intel i210 GbE
controllers for E310.
RJ-45 standard socket
LED indicator on front panel indicates Transmission/Connected status.
USB2.0
USB3.0
Indice
