FUVISION A9 Manuale utente
Solar Powered Security Camera
Model：A9
Email: [email protected]
Facebook:https://www.facebook.com/FUVISIONCam
1. A9 solar camera can only be set up with 2.4g Wi-Fi network. (It's
ok to use Cell phone 4G data to live viewing it after the camera
was set up with 2.4g Wi-Fi network firstly.)
2. When the battery runs out, the camera can only turn on
automatically after the camera is charged more than 4 hours.
3. You may possibly need a Wi-Fi extender if your Wi-Fi signal is
weak around the yard where you want to install it.
4. At least 1-3 hours direct sunlight to the camera every day is
needed, the more sunshine the better to avoid manually charge
it frequently. (North side of the house is not a recommended
installation place)
5. Please format the micro SD card to FAT32 format and install the
card when camera powered off.(Micro SD card is not included
in the package)
6. Please charge your A9 camera before you set it up, it
usually takes up to 10-12 hours to fully charge it.Do not use any
power adaptor exceed 5V/2A,or it may damage the camera.
(There's no indicator to show charging status from the camera)
7. Make sure the distance between your phone,router and the
camera is no more than 1.5 feet when you're ready to pair the
camera. Ensure that the Wi-fi signal strength on your phone is
good.
8. The PIR range is 16 feet around,the recommend camera install
height is 8 feet around.To avoid too much false alarms, we
suggest you do not install the camera with nearby bushes,shrubs,
grasses and tree leaves coming into the PIR range.
9. To ensure an accurate motion detection function,it is suggested
to adjust the camera angle physically to focus the motion area
within the PIR suggested 16ft range.
10. If you install the camera on stucco,brick or concrete surface,
please mark 4 holes matching the bracket and then use a drill
driver to drill into the wall and insert the expansion screws to
hold the camera tightly
Warm tips before you go:
Product Diagram
Bracket
Solar Panel
MIC
PIR
Light Sensor
Status Light
LED
Lens
TF
DC/5V
RST
APP/WIFI
Charging cable to connect
external solar panel
TF DC/5V
APP/WIFI RST
Charging
lnsert SD card
Please charge the camera about 10-12 hours by plugging it
into a power source using the provided USB cable. After
connecting the camera with App, the App will indicate the
battery status.
Please format the SD card to FAT32 format (Application to
Windows system ONLY), then install the micro-SD card when
the camera is off. The camera only supports class 10 SD cards
with at least an 8GB capacity and a maximum capacity of 64GB
(There's no indicator to show charging status
from the camera)
SD Card
TF DC/5V
APP/WIFI RST
TF DC/5V
APP/WIFI RST
TF DC/5V
APP/WIFI RST
Solar Powered Security Camera
Model：A9
Package Includes
4 x Expansion Screws
1 x USB Cable
1 x User Manual
1 x Bracket
Camera
1 x Allen key 1 x Allen key
Make sure the distance between your phone,router and
the camera is no more than 1.5 feet when you're ready to
pair the camera.Ensure that the Wi-fi signal strength on
your phone is good.
1.Download the App
(works only with iOS & Android devices)
2.Turn on the camera
Please locate the“ Ubell” in your Google Play store or
to download the Ubell App.
Press the power button to turn on the camera, after 3
seconds, LED flashes blue. Then you will hear the following
voice “The camera is now ready to begin pairing”.
How to turn off the camera?
Press and hold on the “power” button for 5 seconds, after
you hear music, LED will goes off, which means the camera
has been turned off.
Flash es b lu e
TF DC/5V
APP/WIFI RST
Please connect your phone to the 2.4Ghz wifi firstly
before you pair the camera, make sure your router
password in mind before you start the pairing process.
1) Click "Add a device" and then choose "Setup device",
click "Yes", when you hear the following voice “ The
camera is now ready to begin pairing”.
2) Input the CORRECT WiFi password of your router,
if you input a wrong password you will not be able to
connect it successfully. Click the eye icon to double
confirm the password you entered correct
3.Pairing the camera with the App
Click the icon to double
confirm the password you
entered is correct
Your own wifi name
3) Enter into the “search device” page, make sure to turn up
you phone’s volume to the Maximum, you will hear the
following voice: “Pairing Information Received”.
4) You have connected the device to the App successfully.
Now you can setup a password to log in, which could
protect your privacy. The camera password should be
more than 8 characters in length including numbers
and letters.
What should you do if you can not add the
camera to the APP successfully?
1. Reboot your router to make sure the WiFi
network smooth.
2. Reset the camera using the pin included.
3. Turn up your phone’s volume to the Maximum.
4. Re-do the In-App setup as per user manual
page 5 to 7.
5. Please confirm again your WiFi password correct.
6. Please make sure your router setting is DHCP
enabled, otherwise your router will not send out
WiFi signal for any wireless device for pairing up.
Please choose " Non chinese
mainland users” or you will
not get proper notifications
5) Congratulations! Now you can live view the camera on
your phone anytime and anywhere.
If you're unable to pair the camera,
Please check below suggestions:
How to reset camera:
1.Please reset the camera (using the pin to reset the camera)
to default after you fully charged the camera.
2.Please turn up your phone volume to the maximum,since
the camera pair through sound wave.
3.Please put the camera,phone as near as to your router
(within 1.5 feet) to get a strong wifi signal strength.
4.Please click on the eye icon when you input your router wifi
password to make sure your wifi password CORRECT.
5.Please make sure your router setting is DHCP enabled,
otherwise your router will not send out WiFi signal for any
wireless device for pairing up.
Press and hold on the reset button for 7 seconds to reset the
device. Don’t release the button until you hear the voice"Di",
then you will hear "system reset".
TF DC/5V
APP/WIFI RST
Indice
Altri manuali FUVISION Telecamera di sicurezza
