FUXTEC FX-E1LG3A Istruzioni operative
Original manual for FUXTEC 20V 2 x2,4 double charger
Intended Use
This charger is exclusively intended for charging batteries of the FUXTEC 20 Volt series. The
device is not intended for commercial use. Any other use or modification of the device is
considered improper use and involves considerable risk of accidents. The manufacturer
accepts no liability for damage resulting from improper use.
Use and handling of the battery tool
Only charge the batteries in chargers recommended by the manufacturer.
For a charger that is suitable for a particular type of battery poses a risk of fire when used
with other batteries.
Only use the rechargeable batteries provided for this purpose in battery tools. The use
from other batteries may cause injury and fire.
Keep the unused battery away from paper clips, coins, keys and nails, screws or other small
metal objects that can bridge the contacts of the could cause. A short circuit between the
battery contacts can cause burns or fire
The liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of
accidental contact, rinse with water. If the liquid enters the eyes, you will need to seek
additional medical attention. Leaking battery fluid can cause skin irritation or burns.
Do not use a damaged or modified battery. Damaged or modified batteries may behave
unpredictably and cause fire, explosion or injury.
Do not expose a battery to fire or excessive temperatures. Fire or temperatures above
130°C/ 265°F may cause an explosion.
Follow all charging instructions and never charge the battery or battery tool outside the
temperature range specified in the operating instructions.
Incorrect charging or charging outside the approved temperature range can destroy the
battery and increase the risk of fire.
Charging the battery
- The battery must be charged before first use.
- Press the locking key (3) and remove the battery from the machine.
- Insert the battery pack in the charger.
- Connect the battery charger to the power supply. The charging status is indicated by the
control lamps (4).
- Insert the battery pack into the device and ensure that it clicks into place correctly.
Check the remaining capacity of the battery pack.
- Press the key (2). The remaining capacity of the battery is indicated by the control lamps(1).
DISPOSAL
WARNING!
Make used power tools unusable before disposal:
- mains-operated power tools by removing the connecting plug,
- battery operated power tools by removing the battery.
For EU countries only
Do not throw power tools in household waste! According to the European Directive 2012/19/EC
on waste electrical and electronic equipment and its implementation in national law, used
electrical equipment must be collected separately and sent for environmentally sound recycling.
Raw material recovery instead of waste disposal. Appliance, accessories and packaging should be
recycled in an environmentally friendly way. Plastic parts are marked for recycling
according to type.
WARNING!
Do not throw batteries in the household waste, fire or water. Do not open spent batteries.
Batteries should be collected, recycled or disposed of in an environmentally friendly way.
For EU countries only: According to Directive 2006/66/EC, defective or used batteries must be
recycled.
NOTE
Please contact your local authority/city for information on disposal options.
Technical data
Part Number
Battery Type Li-Ion
Rated Voltage 230V~, 50Hz
Rated Power 140W
Charging voltage 20.9V
Charge current 2.4A
Protection class II
Accessories
You can purchase the following accessories at www.fuxtec.de
Accessories
Battery Pack 4Ah
Battery Pack 2Ah
2.4A fast charger
1A charger
Altri manuali FUXTEC Caricabatterie per batterie
