Fysic FH-76 Manuale utente
USER’S MANUAL
FH-76
2
CONTENTS
1. INTRODUCTION...........................................................................................
2. WHAT YOU’LL FIND IN THE PACKAGING.................................................
3. OVERVIEW
3.1 Headset .................................................................................................
3.2 Base .......................................................................................................
4. INSTALLATION
4.1 Base .......................................................................................................
4.2 To charge the headset ...........................................................................
5. OPERATION
5.1 To switch on the headset .......................................................................
5.2 Volume and balance ...............................................................................
5.3 Tone correction .......................................................................................
5.4 Microphone function ...............................................................................
6 USE IN COMBINATION WITH A MOBILE PHONE
6.1 To pair the headset with the telephone...................................................
6.2 Operation ................................................................................................
7. BATTERY
7.1 To charge ................................................................................................
7.2 Emptybatterynotication .......................................................................
7.3 Maintenance ...........................................................................................
8. USER TIPS AND WARNINGS......................................................................
9. PROBLEMS AND POSSIBLE SOLUTIONS ................................................
10. DECLARATION OF CONFORMITY .............................................................
11. SPECIFICATIONS .......................................................................................
12. PROOF OF WARRANTY..............................................................................
1. INTRODUCTION
The Fysic FH-76 allows you to privately listen to your favourite
music or TV show without being disturbed and at your own pre-
ferred audio volume.
The FH-76 is supplied with various connecting cables for the con-
nection of practically any audio source.
The headset is provided with its own built-in microphone which
youcanuseforadditionalamplicationofconversationsinyour
direct vicinity.
3
You may also pair the headset with your smart phone to answer
incoming calls and have conversations.
On the headset, you may adjust the volume and the balance
between the left and right speakers and also increase the treble
and/or bass.
2. WHAT YOU’LL FIND IN THE PACKAGING
Inthepackaging,you’llndthefollowingitems:
1. Wireless and
light-weight
headset with
built-in battery.
2. Base, provided
with a charger
function for the
headset.
3. Power adaptor.
4. An extra set of
earplugs.
5. Audio connecting
wire. Use this
wire to connect
the base with the
TV, radio or other
audio source.
6. Audio adaptor wire.
For connecting devices provided only with RCA or Cinch
connectors.
4
3. OVERVIEW
3.1 Headset:
1. Power slider.
2.StatusLED:
• ashinggreen(headsetinbase):thebatteryisbeing
charged
• constantgreen(headsetinbase):thebatteryisfull
• ashingblue(slowly):headsetonstandby
• ashingblue(rapidly):headsetissearchingforthebase/
the battery is nearly exhausted
• constantblue:headsetisconnectedwiththebase
• constantgreen:theheadsetissettothe‘microphone
boost’ position
• ashinggreen:theheadsetissettothe‘microphone
boost’ position and the battery is nearly exhausted
• Alternatinggreen&blue:incomingcall
3. Volume control.
4.Balancecontrol:Thisallowsyoutoincreasethevolume
coming from the left or right ear speaker according to your
own preferences.
5
5. Tone push-button, press repeatedly to give the treble or
base an extra boost.
6. This holds the built-in NFC coil for a quick link with your
mobile phone.
7. Push-button for answering an incoming call or for interrupt-
ing the music you’re listening to.
8. Power push-button for the built-in microphone, while also a
push-button for paring the headset.
9. Built-in microphone.
10.Left speaker.
11. Right speaker.
12.Micro USB port to charge the headset directly without hav-
ing to place it into the base.
13.Charging contacts, when placing the headset into the base,
leave it sitting on these contacts.
3.2 Base:
1.Chargingcontacts:
These will charge the headset when the headset is placed
into the base.
2.PAIRbutton:topairtheheadsetwiththebase.
3.Statusindicator:
• ashingblue(slowly):baseisonstandby
• ashingblue(rapidly):baseissearchingfortheheadset
• constantblue:baseisconnectedtotheheadset
4. Connection for the supplied power adaptor.
5. Connection for the audio wire.
6
4. INSTALLATION
4.1 Base:
1. Connect the
included power
adaptor with the
DC IN input at
the rear of the
base and insert
the adaptor into a
230V wall socket.
2. Take the audio connecting wire and plug one side into the
AUDIO IN input at the rear of the base.
3. Depending on the audio source to which the FH-76 must be
connected,oneofthefollowingsituationsmaybeapplied:
3.5mmearphonesconnection:
This is the most commonly used connecting method for head-
sets or earphones. Directly connect the wire to this connector.
RCAorCinchconnection:
This connection is commonly used for somewhat more pro-
fessional applications or for equipment without earphones or
headsets connections. In this case, use the audio adaptor
wire.
7
4.2 To charge the headset:
1.Viathebase:
Slide the ON/OFF switch to the OFF position
and place the headset into the base to re-
charge the built-in battery.
StatusLED:
ashinggreen: whilecharging,thestatus
LEDwillbeashingina
green colour
constantgreen: assoonasthebatteryisfully
charged, the green status
LED will remain permanently
lit.
It takes approximately 2 hours to fully charge an empty bat-
tery,howeverforrsttimeuse
it’s recommended to continu-
ously charge the battery for 4
to 5 hours.
2.Tochargedirectly:
Slide the ON/OFF switch to
the OFF position and connect
the power adaptor to the USB
port on the side of the head-
set.
Only use the supplied power adaptor with type no.
YLJXA-E050055.
Input 100-240VAC 0.5A / output 5.0VDC 550mA
8
5. OPERATION
In this description of the various functions of the FH-76
it’s assumed that the set is connected according to the
instructions in chapter 4, that the battery is fully charged and
that the base is connected to a TV, radio or similar signal
source.
5.1 To switch on the headset:
Use the ON/OFF switch on the side of the headset to switch
the headset on or off.
Whenswitchedon,thestatusLEDwillashbrief-
ly while the headset starts searching for the base.
StatusLED:
ashingblue: whilesearchingforthebase,the
statusLEDashesinabluecolour
constantblue:assoonastheheadsetisconnect-
ed to the base, the blue status LED
will remain permanently lit
ATTENTION: when removing the headset from
the base while the ON/OFF switch is set to the
ON position, you’ll have to rst slide the switch
to OFF and then back to ON.
5.2 Volume and balance:
Use the volume control to adjust the sound volume
coming from the ear speakers.
Use the balance control to determine whether the
left or right ear speaker must be louder or softer than
the other ear speaker.
To prevent hearing damage we advise you to
first set the volume and then to put the head-
set on your ears. This prevents a jolt if the volume
was set too high.
9
5.3 Tone correction:
You may use the TONE push-button on the base to enable the
tone correction and to adjust the sound to your own prefer-
ences. Tone signals in the ear speakers will inform you of the
chosensetting:
• 1tonesignal:trebleisboosted
• 2tonesignals:treble&bassareboosted
• 3tonesignals:onlythebassisboosted
• longtonesignal:notonecorrection
Attention,thistonecorrectiononlyinuencesthesignalsend
via the base to the headset. It has no effect on the pitch of the
microphone build into the headset. See also the following item.
5.4 Microphone function:
The headset is provided with a built-in microphone. This mi-
crophoneampliesthesoundscomingfromyourimmediate
vicinity(suchasaconversation)toreproducethemthrough
the ear speakers.
Switch on the headset and 1x press the MIC button to enable
this function; the green status indicator will illuminate.
Press the MIC button again to disable this function.
Attention,thepush-buttonforthetonecorrection(seeabove)
has no effect on the microphone sound.
The TV, radio, etc. connected to the base doesn’t need to be
switched on to use this function.
10
6 USE IN COMBINATION WITH A MOBILE PHONE
You may pair the FH-76 with your telephone. After doing
so, when you’re listening to the radio or TV and you
receive an incoming call, you may use the headset to answer
the call and have your telephone conversation via the headset
fully hands-free. At the end of the conversation, the device will
switch back to the radio or TV.
6.1 To pair the headset with the telephone:
ViaNFC(NearFieldCommunication):
If your mobile phone is provided with the
NFCfunctionality(NearFieldCommu-
nication),youmaypairtheheadsetwith
yourphoneasfollows:
1. switch on the NFC function of your
mobile phone
2. switch on the headset
3. hold the phone against the headset
accordingtothebelowgure
4. the headset and phone will be paired
after several seconds
ViatheBluetoothmenu:(optional)
If your phone is not provided with NFC,
you may pair the headset with your phone as follows.
1. switch on the base and headset and make sure they are
connectedwitheachother(checkthisbybrieylisteningto
thesoundofyourradioorTV).
2. remove the adaptor of the base from the wall socket.
3. on the headset, press and hold the MIC/PAIR button for
approx.5secondsuntilthebluestatusLEDstartsashing
rapidly
4. switch on the Bluetooth function of your mobile phone and
have the phone search for available devices. After several
seconds,the“FysicFH-76”willbefound.Conrmthis‘de-
vice’
Indice
