Specifications
1、Tuning mode:Chromatic/guitar/bass/violin/ukulele
2、Tuning range：B0--B7
3、Rhythm:
4、Beat:0.1.2.3.4.5.6.7.8.9.
5、A4 calibration :410-490Hz
6、Tuning way: tuning automatically
7、Tolerance：+/-1cents
8、Power：3V(2 pieces of AAA batteries)
9、Accessories:Battery ,Pick up,User Manual
Metronome
1.First enter into the tone generator by pressing button 5 under tuner mode.
2.Press button 5 ,it will play the note with LCD displaying as C，C#，D，D#，
E，F，F#，G，G#，A，A#，B,from low to high pitch. You can adjust the
volume as you like ,and change the displaying note by sliding the button 5 ,
and it can adjust the sound with different A4 and flat as you like.
2.tuning steps:
a.Turn it on and keep it standing beside ;for more precise tuning ,you can use
the pick-up to clip the instrument.
b.Press button 1 to choose the tuning mode accordingly .
c.Lightly pluck the string you wish to tune. It will automatically detect the
current pitch,and display which string you are tuning by the clear LCD.
d.Make sure the LCD correctly display which string you are tuning.For
instance,under Guitar mode, if you are tuning the second string ,and the LCD
display "1A",then the string is too tight and please loose it;if the LCD display
"3G",you string is too loose and please tighten it.While under Chromatic
model,the LCD will show the note as C,C#,D,D#,E,F,F#,G,G#,A,A#,B,
from the low to the high pitch.
e.When the LCD correctly display the string which you are tunning,adjust the
string slightly according to the Note accuracy indication needles.Loosening
or tightening the string a bit as needed. The string will be in tune when the the
needle point to the middle"0",and the middle LED turn on.
f.After getting all the strings in tune,go back and double check each one. You
may find some of the strings are still slightly flat.As you tune-up ,pressure
from the strings naturally bends the guitar neck by a very small amount .Then,
in turn,make some of strings which you have just tuned slightly loose again.
Tuning all the strings in order two or three times is a good way to solve this
problem.
g.For standard instrument tuning,the flat tuning is set to "#"(standard position).
In some situations,you can tune your instrument down one half-step or
semitone as you like. To do this ,simply to press button 4.
Tone Generator Operation
Fzone Technology Co., Ltd.
Metronome Operation
1.Keep pressing button 4 to enter into metronome mode.
2.Start or stop playing the metronome : Press button 1.
3.Changing the beat: press button 4 shortly to change the beat in sequence:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
4.Choosing Value:press button 5 to choose the value from 7 different types.
5.Press button 2(UP) or button 3(DOWN) to change the tempo between 30-280 in 1
steps, keep pressing will quick the changing.
Auto-off function: If no operation or no signal is detected for 3 minutes, the unit will be
turned off automatically.
