G-L-T SC 1216 Manuale utente
SC 1216 DMX Operator
Instructions for use
2
Summary
SC-1216 DMX Operator
2.2.5 Delete all Scenes........................................................ ........................... 13
3 Technical Characteristics .............................................. .............................. 27
1 Control and Functions ......................................... ............................................. 5
2.3.1 Copying a Bank of several Scenes into a Chaser ............................... 17
2.3.2 Adding a Step/Step into a Chaser.... .................................................. 17
2.3.3 Delete a Steps of a Chaser ........................................... ........... 18 2.3.4
Deleting a Chaser ............................. ............................................. 19
2.2.6 Copy a Bank............................................ .................................. 13 2.3
Programming a Chaser ..... .................................................. ................... 14
2.2 Programming a Scene............................................ ................................ 8
2.5 Calling a Chaser ............................................. ............................................. 23
2.2.1 Copying/Storing multiple Scenes ......................................... .. 9 2.2.2
Copying a Scanner........................................ .................................. 11 2.2.3
Copying a Scene..... .................................................. ......................... 11 2.2.4
Deleting a Scene.............................. .................................................. ........... 12
2.5.1 Calling a Chaser in Manual Mode ......................................... ......... 23 2.5.2
Auto LED Mode for Chaser ............................. ............................... 23 2.5.3
Musical Mode for Chaser ........... .................................................. .... 24
2 Use................................................ .................................................. ..............7
2.4.1 Calling up a Scene in Manual Mode ......................................... ........ 20
2.4.2 Auto LED Mode.............................. .................................................. 21
2.4.3 Musical Mode ............................................. ......................................... 22
2.1 Programming Mode............................................... ......................................... 7
1.1 Front Panel................................................ .................................................. ...... 5
2.3.5 Clear all Chasers ........................................... ........................... 19
1.2 Rear Panel .......................................... ............Error ! Undefined bookmark.
2.4 Calling up a Scene ............................................. ............................................. 20
3
SC-1216 DMX Operator
4
Descriptions
• 192 DMX Channels on 12 Scanners or Moving Heads each having 16 DMX Channels Max
• Simplified manual use
• 8 Faders for manual adjustment of DMX output levels
• General Blackout
• 6 Chaser including 240 Scenes on 23 Bank
SC-1216 DMX Operator
• Fade-Time setting for all DMX values
• 23 Bank of 8 Programmable Scenes
concerns the scrolling of Chasers or Scenes)
• Internal memory in case of power outage
• Standard DMX 512
• Chaser restitution adjustable by Fide-Time or by Auto Program (this
5
1 Control and Functions
OFF/ON
OFF/ON
Fade Control
6
33-48
145-160
177-192
OFF/ON
OFF/ON
OFF/ON
1. Scanner key (1-12)
4
1-16
3
SC-1216 DMX Operator
1
10
1.1 Front Panel
97-112
OFF/ON
OFF/ON
OFF/ON
DMX channels
65-80
8
OFF/ON
To scan
7
49-64
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
12 Scanner each with 16 DMX Channels (controlled by Fader on Page A + B)
5
12
17-32
129-144
161-176
2
11
113-128
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
LED
9
81-96
OFF/ON
OFF/ON
OFF/ON
OFF/ON
6
,
of a Chaser scroll.
9. Music/Bank button
Setting the Fade Time corresponds to the time between each
Step when scrolling the Program or the Chaser.
13. Fader Speed
,
(Up/Down)
To activate Musical Mode or copy a Bank and these
Scenes.
and that none
SC-1216 DMX Operator
To select a Bank using the UP/DOWN keys, the third and fourth
Digits of the display indicate the number of the Bank chosen. (01
– 23).
To enable Program or Chaser auto-scroll mode
4. Bank key
11. Tap Sync/
Display button
Press once to call up a Scene already memorized or to
memorize a Scene during programming. The second Digit of
the display indicates the Scene number.
10. Blackout button Press this button to activate the Black Out function, a
7. MIDI/Rec button
Function to switch from Page A to Page B Page A = Channels 1
to 8 and Page B = Channels 9 to 16.
2. Scene button
6. Programm key To activate Programming Mode.
Copy
14. PageSelect
the settings of the first 8 Channels (on Page A) as well as
5. Chaser button (1-6) To call one of the six Chasers during programming where
where to delete a Scene or Chaser.
,
12. Fader Fade Time Fade Time adjustment of the current Program or Chaser.
Possible adjustment of the Chaser during scrolling (0.1s - 10
min.).
3. LCD display
8. Auto/Del button
In Auto Del mode the scrolling speed can be recorded by
pressing the button twice at the desired rate, the maximum being
10 minutes. Use this key to change the channel DMX value
display format (0 to 255 or 0% to 100%) in Program Mode.
Press the button of the desired projector, the corresponding indicator lights up and the
channels of this projector can be adjusted. When a spotlight is not selected,
the channel adjustment faders are inactive. If a projector is selected only the last 8 Channels
(from Page B) are
accessible.
Current Functions display screen.
For storing Scenes or activating MIDI Mode.
second time to restore the current function.
Step/time
P ROG
Music trigger
step
Chase Scene Bank
Auto trigger
Blackout
2 Use
(Page A + B)
SC-1216 DMX Operator
We view other information that is reported for LEDs.
The indicator LED (which is lit) corresponds to Page A or B which
is activated.
Music Trigger = Music Mode activatedAuto Trigger = Auto Run mode activated
LCD Screen Information
automatically .
We view all information on the LCD screen. The 1st value indicates the Chaser (1 to 6) which is
activated), the 2nd value indicates the Scene (1 to 8) which is activated and the 3rd value
indicates the Bank number (1 to 23) which is activated.
2.1 Programming mode
Turn on the console, Manual Mode is assigned
Press and hold the PROGRAMM button (3 seconds). We
enter Programming Mode, we now work with Scenes where
Chaser. The PROG Led flashes.
The SC 1216 is a console which can control up to 12 Scanners each having 16 DMX Channels
Maximum. Possible programming of 23 Banks each comprising 8 Scenes. Having a capacity of
240 Scenes in total on 6 Programmable Chasers that can work in Mode: Manual, Auto-Music-
Del, Tap Sync or MIDI.
To adjust the value of DMX channels. Channels 1 to 8 on Page A,
Channels 9 to 16 on Page B.
Blackout = Blackout
15. Fader 1-8 / 9-16
Prog = Program mode activated
7
8
Fixtures
Scan buttons 1-12
2. Select the Scanners or Lyres using Button Fixtures 1 to 12, the
corresponding LED lights up (We can also work with more
than
12 Scanners provided they are assigned in parallel to the same
values).
2.2 Programming a Scene
SC-1216 DMX Operator
4. In case we are working on more than 8 DMX Channels, go to Page
B to adjust Channels from 9 to 16.
5.
We have selected our 1st Scene, we can now memorize this
1st
Scene. By first pressing the MIDI REC key (one press), the final
memorization of this Scene will be done later (step 6 + 7).
1. Programming mode activated (Led indicator flashes)
+ Colors + Effects. Fader Down Position
3. Using the Faders (and Wheel for Pan/Tilt) select a 1st Positions +
Gobos sequence
,
Value = 000% / Fader Position Up
select a Bank using the Bank keys
6. This registration must be done in a Bank
Value = 255%.
Up/Bank Down. We have 23 Banks including 8 Scenes each.
ÿ
ÿÿ
ÿ
ÿÿ
9
Fixtures
Scan buttons 1-12
Scene No. + Bank No. Stored.
7. Choose a Scene number, by pressing (one press) the
button of the chosen Scene.
SC-1216 DMX Operator
2. Select the Bank using the Keys
Bank UP/Bank DOWN on which you wish to
edit the previously recorded Scene.
After validation, all the LEDs on the console flash
3
times, your 1st Scene is memorized.
9. To exit Programming Mode, hold down the PROG key
(3 seconds), our different Scenes are now memorized
,
We visualize all this information on
and the Prog LED is off.
2.2.1 Copying/Storing Multiple Scenes (After 1st Saving)
8. Proceed as follows (steps 1+2+3+4+5+6+7) for each
of the 8 Scenes of the chosen Bank, a quick reminder
that you must select your Scanners or Lyres (Fixtures
1-12 keys) during the programming. Before
exiting
Programming Mode, turn off all Scanners or Lyres
using the Fixtures 1-12 keys.
the LCD screen
1. Programming mode activated (Led indicator
flashes)
10
ÿ
ÿ
ÿÿ ÿÿ
6. Select your Bank then your Scene, press the button for the
chosen Scene once. After this validation the LEDS on the
console flash 3 times: SCENE RECORDED! ! !
3. Recall your 1st Scene memorized to
SC-1216 DMX Operator
select
.
using the Scene 1 Button in order to have
othera
your first starting point.
5. Using the MIDI/REC button, make the
We can thus memorize each of the Scenes
already validated on another Bank.
Attention:
4. Always using the Channel Faders from 1 to 8
Page A and from 9 to 16 Page B (if necessary),
position
ATTENTION not to forget to call your
Scanners or Lyres concerned using the
Fixture Keys 1 to 12.
memorization (1st step), press this key once.
Indice
