GAELCO Tuning Race Manuale utente

IT IS THE RESPONSIBILITY OF THE OPERATOR TO CARE ABOUT COSTUMER SAFETY AT ALL

TIMES. PLEASE READ AND OBSERVE THE NOTES ON SAFETY DESCRIBED IN THIS MANUAL.

USER’S MANUAL

GAELCO

S.A.

2005

second issue

MOTION

Thank you for purchasing a Gaelco’s product. This manual explains how to safely operate

your TUNING RACE®machine. Failing to operate the machine correctly could result in

malfunction or accident, so please read the manual carefully before starting operation,

specially the SAFETY NOTES (Section 3).

Unauthorised reproduction of this document or any of its contents is strictly forbidden,

without permission from Gaelco S.A.

Note: Operator's Manual Specifications are subject to change without prior notice

and design.

TUNING RACE® has been manufactured in accordance with European

Community directives. Any changes or modifications to this machine has

to be authorised by Gaelco S.A. and must be in accordance with the CE

directives.

Using spear parts that do not fit specifications will void the warranty.

Removal of serial numbers and/or bar codes from product or

components will void the warranty.

Published by:

GAELCO S.A.

Escipión 11

08023 Barcelona - SPAIN

Tel. ++34 93 417 36 26

Fax ++34 93 417 28 02

e-mail [email protected]

web www.gaelco.es

FCC Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part A of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operating in a

commercial environment. This equipment uses, and can radiate radio frequency energy, if

not installed and used according to the instruction manual, and may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

GAELCO - TUNING RACE

About TUNING RACE

1. GENERAL INFORMATION

1.1 Manufacturer and Machine data

1.2 Legislation references

1.3 Technical Service

1.4 Responsibility

2. MACHINE SPECIFICATIONS

3. SAFETY NOTES

3.1 General considerations

3.2 Location

3.3 Moving the machine

3.4 Operation

3.5 Motion system

4. MATERIAL HANDLING

4.1 Transport of the packaged units

4.2 Storage

4.3 Reception

5. UNPACKING, ASSEMBLING AND

INSTALLATION

5.1 Inspection before assembling

5.2 Assembling

5.3 Installation

5.4 Switching on the machine

6. TEST MODE

6.1 Monitor adjustment

6.2 Controls test

6.3 Sound test

6.4 Motion system test

6.5 Settings

6.6 Camera test

6.7 Link settings

6.8 Tournament settings

6.9 Scoreboard

6.10 Book-keeping

6.11 Exit menu

7. HOW TO PLAY

8. TOURNMENT MODE

9. TECHNICAL SERVICE

9.1 Prior considerations

9.2 Safety precautions

9.3 Motion system

9.4 Emergency stop

9.5 Position potentiometers

9.6 Drive parameters

9.7 Troubleshooting

10. PARTS LIST

MONITOR CABINET

10.1 Accessories

10.2 Subwoofer parts

10.3 Union harness assembly

10.4 Billboard assembly

10.5 Rear accesories

10.6 Monitor and front door

10.7 Electronic parts 1

10.8 Electronic parts 2

10.9 Camera assembly

10.10 Bottom parts

PLATFORM

10.11 Main assemblies

10.12 Dashboard assembly - 1

10.13 Dashboard assembly - 2

10.14 Steering assembly

10.15 Steering mechanism

10.16 Shift gear assembly

10.17 Coin acceptor tower

10.18 Mobile platform assembly

10.19 Pedals assembly

10.20 Seat assemby

10.21 Base assembly

10.22 Motor assembly

10.23 Service panel

11. WIRING DIAGRAMS

12. CREDIT DISTRIBUTOR SETUP

GAELCO -TUNING RACE

INDEX

GAELCO - TUNING RACE

Manufacturer GAELCO, S.A.

Address Escipión 11

ZIP 08023

City Barcelona

Country : SPAIN

Tel. 34 93 417 36 26

Fax 34 93 417 28 02

e-mail [email protected]

Technical Service [email protected]

Name of the game TUNING RACE®

Model MOTION

EM EMISSION

•EN 61000-3-2 (1995), Harmonics

•EN 61000-3-3 (1995), Fluctuations

•EN 55022 (1994), Continuous conducted emission (Class A)

•EN 55022 (1994), Radiated emission (Class A)

EM IMMUNITY

•EN 61000-4-2 (1995), ESD

•EN 61000-4-3 (1996) & ENV 50204 (1995), Radiated field of RF

•EN 61000-4-4 (1995), EFT burst

•EN 61000-4-5 (1995), Surges

•EN 61000-4-6 (1996), RF common mode

•EN 61000-4-8 (1993), 50 Hz H-field

•EN 61000-4-11 (1994), Dips, interruptions

ELECTRICAL SAFETY

UNE EN 60335-1 (1997) + Erratum (1997) + A11 (1997) + A12 (1997) + A13 (1999)

+ A14 (1999) + Erratum (1999).

Note: Test passed in Motion Test mode

GAELCO - TUNING RACE

1. GENERAL INFORMATION

1.1 MANUFACTURER AND MACHINE DATA

1.2 LEGISLATION REFERENCES

DIMENSIONS AND WEIGHT

1) Crate dimensions and shipping weight of each module

2) Dimensions and net weight of each module unpacked

* With the billboard

3) Total dimensions of the machine, installed on site

Gaelco S.A. or its Distributors carry out technical service.

Any modifications made to this machine that are not authorised in writing by the

manufacturer will be considered to be at the exclusive responsibility of the operator, who

will consequently become the new "manufacturer" and must operate in compliance with the

European Community directives.

In case of an accident caused by a defective part, the manufacturer will assume

responsibility only if the machine was defective in its original condition. However, this

responsibility shall be diminished or even totally annulled if the operator or the player do

not follow the instructions provided or if the operator uses spare parts that are not covered

by guarantee, are not authorised in writing or do not correspond to the specified technical

characteristics.

GAELCO - TUNING RACE

1.3 TECHNICAL SERVICE

1.4 RESPONSIBILITY

2. SPECIFICATIONS

width depth height weight

1000 mm

Monitor cabinet

Platform

800 mm 1935 mm 205 Kg

1000 mm 1500 mm 1538 mm 325 Kg

width depth height weight

880 mm

Monitor cabinet

Platform

685 mm 2165 mm* 190 Kg

1228 mm 1480 mm 1370 mm 310 Kg

width depth height

1240 mm 2465 mm 2165 mm

POWER SUPPLY

Operating Power: 220-230 VAC, 50 Hz

Output: +5VDC 20A, +12VDC 8A

MONITOR

34" Hantarex Polo/2 STAR PH, code 01297790

CPU BOARD

PCB Gaelco TUNING RACE

CONTROLS

•Interactive steering wheel with gear shift

•Start button, placed on dashboard

•View button, placed on the dashboard

•Accelerator pedal

•Brake pedal

•Emergency Stop button, placed on top of the coin tower

MOTION SYSTEM

Degrees of freedom: 2 DOF

Actuators: 2 induction motors (geared), 0.75KW each

Control: 2 frequency inverters SKA11200075, input voltage 230V +/-10%, 50/60Hz

ATTACHMENTS

Operator's Manual (1)

Motor driver manual (1)

Monitor Manual (1)

Coin box keys (2)

Monitor cabinet keys (3)

Power cord (3m long) (1)

Link cable (1)

Monitor cable (remote control) (1)

GAELCO - TUNING RACE

In order to use this machine safely please read carefully this Manual BEFORE the

installation, use or maintenance of the machine.

This Operator's Manual and others manuals delivered with the machine must be available

to the operating and service personnel.

When transporting or reselling the machine, be sure to attach this Manual.

The TUNING RACE machine has been designed for indoor use only, within residential or

commercial areas, and must be used exclusively for the purpose intended.

GAELCO S.A. bears no responsibility for accidents, injury or damage resulting for

unauthorized changes or improper use of the machine.

GAELCO - TUNING RACE

3. SAFETY NOTES

WARNING

To avoid accidents or damages, it is imperative to follow the notes on Safety resumed

bellow, as well as all those included in the following sections:

SECTION 4. MATERIAL HANDLING

SECTION 5. UNPACKING, ASSEMBLING & INSTALLATION

SECTION 9. TECHNICAL SERVICE

GAELCO - TUNING RACE

3.1 GENERAL SAFETY CONSIDERATIONS

•Before operating the machine, check that it has been installed correctly and in

accordance with this Manual.

•As some parts of the machine move during game play, there are places where the

distance between the stationary section and the mobile section changes. Despite the

measures implemented to avoid accidents, if the operator feels that a person is in any

danger, he should warn that person or stop the machine immediately by using the

Emergency Stop button.

•The warning notices (stickers) must be kept in such condition that customers can read

them easily.

•Installation, service or routine maintenance should be carried out by qualified

personnel.

•Before connecting the machine to the mains supply, verify that it is set for the correct

voltage and that the proper fuses are already installed.

•When replacing fuses, use spare fuses of the same type and rating than the originals.

The use of other material can cause serious damages on the electronic circuits or even

a fire hazard. Check the Parts List to know the exact specifications.

•The machine includes areas of high voltage. Care must be taken at all times to avoid

electrical shock whenever inspecting or adjusting the equipment, particularly around

the monitor.

•To ensure safe operation, the machine must be grounded with a plug securely

connected to Earth.

•Do not turn ON the power switch until the machine has been installed on its dedicated

place.

If there is any error or problem with this machine, operation must be

stopped immediately.

GAELCO - TUNING RACE

3.2 SAFETY PRECAUTIONS CONCERNING LOCATION

Do not place the machine where it might be an obstacle in case on emergency (i.e.

close to fire extinguishers or emergency exits).

Install and operate the machine in places where appropriate lighting is available, so

warning labels can be clearly read by the customers.

This machine has been for indoor use only, within residential or commercial

spaces. Absolutely do not set up the machine outdoors or under the following

conditions:

•Direct exposure to sunlight, high humidity, water contact, dust, high heat or extreme

cold.

•In locations near containers holding liquids or liquid dispensing equipment. In general,

precautions should be taken against spilling liquids of any kind whatsoever over the

machine

•In a place exposed to vibration. The machine must be installed on a level surface with

levellers properly adjusted.

•In locations near ventilating holes. Doing so could cause internal temperature to rise

excessively, resulting in equipment failure.

•Near hazardous substances

Furthermore:

•In order to have easy access to the PSU, CPU and control devices, please make sure

that the rear an sides of the machine are separated from the wall or other machines by

at least 300mm (12")

•Ventilation slots must be not obstructed, and the machine must be positioned so as to

leave a distance of at least 100mm (4") from possible obstructions

•Do not run the power cord across passages where pedestrian's feet could get caught

on the cord.

•Ensure that the location’s power supply is equipped with an Earth Leakage Breaker

rated at 30mA.

GAELCO shall not be held responsible for any damage resulting from the failure to

observe these instructions.

Indice

Altri manuali GAELCO Macchina per videogiochi arcade

GAELCO

GAELCO TOKYOCOP Manuale utente

GAELCO

GAELCO ATV TRACK Manuale utente

Manuali Macchina per videogiochi arcade popolari di altre marche

Universal Space

Universal Space COCONUT BASH Manuale utente

Bay-Tek

Bay-Tek EVOLVE Manuale utente

Global VR

Global VR America's Army Istruzioni per l'installazione e il funzionamento

Atronic

Atronic Cashline Manuale utente

Universal Space

Universal Space Checky Monkey Manuale utente

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manuale utente

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manuale utente

Family Fun Companies

Family Fun Companies Reactor Guida rapida

Universal Space

Universal Space FRUIT MANIA Extreme Manuale utente

falgas

falgas CARRUSEL FIESTA Manuale utente

Konami

Konami DanceDanceRevolution Manuale utente

Bay-Tek

Bay-Tek quik drop Manuale utente

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manuale utente

Adrenaline

Adrenaline Flying Tickets Istruzioni per l'installazione e il funzionamento

Swinks

Swinks Stern Pinball Ghostbusters Manuale utente

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manuale utente

jakar

jakar SPEED CARS Manuale utente

Carmelli

Carmelli HAT TRICK NG1015H Manuale utente