Gainscha GS-2208D Series Manuale utente
GS-2208D/GS-3205D Series
DIRECT THERMAL
THERMAL LABEL PRINTER
USER’S MANUAL
Ver.1.0.4
2
Agency Compliance and Approvals
EN 55032, Class A
EN 55024
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC part 15B, Class A
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case you will be required to correct the interference at
your own expense.
Environmental protection
Do not dispose of this product in an unsorted public trash can. You should recycle
this product according to local regulations. For more information, please see our
website:
website：http://www.gainscha.com.tw
Copyright Information
The copyright in this manual, the software and firmware in the printer described therein are owned
by Gainscha All rights reserved.
All other trademarks are the property of their respective owners.
Information in this document is subject to change without notice and does not represent a
commitment on the part of Gainscha No part of this manual may be reproduced or transmitted in
any form or by any means, for any purpose other than the purchaser’s personal use, without the
expressed written permission of Gainscha.
3
Contents
1. Introduction...............................................................................................................................................................5
1.1 Product Introduction......................................................................................................................................5
1.2 Product Features...............................................................................................................................................7
1.2.1 Printer Standard Features.....................................................................................................................7
2. Operations Overview.............................................................................................................................................9
2.1 Unpacking and Inspection ...........................................................................................................................9
2.2 Printer Overview ............................................................................................................................................ 10
2.2.1 Front View................................................................................................................................................. 10
2.2.2 Interior View ............................................................................................................................................ 10
2.2.3 Front View................................................................................................................................................. 11
2.2.4 Rear View .................................................................................................................................................. 11
3. Setup..........................................................................................................................................................................12
3.1 Setting up the Printer.................................................................................................................................. 12
3.2 Install Printer Driver ..................................................................................................................................... 13
4
3.3 Loading the Media........................................................................................................................................16
3.3.1 Loading the Roll Labels....................................................................................................................... 16
3.3.2 print media loading diagram........................................................................................................... 16
4. LED and Button Functions................................................................................................................................17
4.1 LED Indicator................................................................................................................................................... 17
4.2 Regular Button Functions.......................................................................................................................... 18
4.3 Power-on Utilities ......................................................................................................................................... 19
5. PrinterUtility ...........................................................................................................................................................20
5.1 Start the PrinterUtility .................................................................................................................................20
5.2 Printer Function ............................................................................................................................................. 21
6. Troubleshooting................................................................................................................................................... 22
6.1 Common Problems.......................................................................................................................................22
7. Maintenance...........................................................................................................................................................24
8. Revise History ........................................................................................................................................................ 25
5
1. Introduction
1.1 Product Introduction
Thank you for purchasing Gainscha bar code printer. Although the printer has a small
footprint, it delivers reliable, superior performance.
This printer provides direct thermal printing at user selectable speed of: 2.0、3.0、4.0、5.0、
6.0、7.0 or 8.0 ips for 203 dpi; 2.0、3.0、4.0 or 5.0 ips for 300 dpi. It accepts roll feed, die-cut,
and fan-fold media with gap or black mark. All common bar codes formats are available. Fonts
and bar codes can be printed in 4 directions, 8 different alphanumeric bitmap fonts and built-
in scalable font capability. You will enjoy trouble free, high throughput for printing labels with
this printer.
6
⚫Applications
o Manufacturing & Warehousing
◼Work in Progress
◼Item Labels
◼Instruction labels
◼Agency labels
o Healthcare
◼Patient Identification
◼Pharmacy
◼Specimen Identification
o Parcel Post
◼Shipping/ Receiving Labels
o Small Office/ Home Office
o Retail Marking
◼Price tags
◼Shelf labels
◼Jewelry tags
7
1.2 Product Features
1.2.1 Printer Standard Features
PRINTER MODEL
GS-2208D
GS-3205D
GS-2208DM
GS-3205DM
Level
Economic
Economic
Empower
Empower
Resolution
8dots/mm
(203DPI)
12dots/mm
(300DPI)
8dots/mm
(203DPI)
12dots/mm
(300DPI)
Printing Method
Direct Thermal
Max. print speed
203.2mm(8”)/
second
127mm(5”)/
second
203.2mm(8”)/
second
127mm(5”)/
second
Max. print width
54 mm (2.13“)
54 mm (2.13“)
54 mm (2.13“)
54 mm (2.13“)
Max. print length
2,794 mm (110“)
1,016 mm (40“)
25,400 mm (1000“)
11,430 mm (450“)
CPU
specifications
400 MHZ, 32 bits, ARM9
Memory RAM
64 MB SDRAM
64 MB SDRAM
Memory ROM
32 MB Flash Memory
128 MB Flash Memory
Interface
➢USB 2.0 High Speed 480Mbps
➢USB Host 2.0, for scanner or PC
keyboard
➢Internal Ethernet 10/100Mbps
➢USB 2.0 High Speed 480Mbps
➢USB Host 2.0, for scanner or PC
keyboard
➢Internal Ethernet 10/100Mbps
Real Time Clock
N/A
Standard (CR2032 Battery Install)
Buzzer
N/A
Standard
Sensors
Head open sensor, Reflective sensor (moveable), Transmissive sensor (Fixed), Front-
Reflective sensor
Power
External universal switching power supply
Input: AC 100-240V, 2.5A, 50-60Hz, Output: DC 24V, 2.5A, 60W
User Interface
1 power switch, 2 buttons (Feed & Pause), 2 LEDs (Online, Error status)
Internal fonts
➢8 alpha-numeric bitmap fonts
➢True type font engine (need download scalable font file)
8
1D Baroced
Code 11, Code 39, Code 93, Code 128 (subsets A, B, C), UPC-A, UPC-E, UCC-128,
Codabar, EAN/JAN-8, EAN/JAN-13, Interleaved 2 of 5, ITF14, MSI Pleassy, PostCode,
Telepen
2D Barcode
QR Code, Micro QR Code, PDF417, Micro PDF417, MaxiCode, Aztec Code, Data
Matrix
Rotation
Font and barcode support 0, 90, 180, 270 degree
Printer language
Compatible to TSPL, ZPL, ZPL II
Media type
Continuous, die-cut, black mark, fan-fold, notched (outside wound)
Media width
18 ~ 65mm (0.7“ ~ 2.55“)
Media thickness
0.06 ~ 0.19mm(2.36 ~ 7.48mil)
Media core
diameter
25.4 mm (1”)
Label roll capacity
111.7 mm (4.4“) OD
Label length
5 ~ 2,794 mm
(0.2“ ~ 110“)
5 ~ 1,016 mm
(0.2“ ~ 40“)
5 ~ 25,400 mm
(0.2“ ~ 1000“)
5 ~ 11,430 mm
(0.2“ ~ 450“)
Physical dimension
129mm(W)x165.3mm(H)x244.3mm(D)
Enclosure
ABS plastic
Safety certification
FCC Class A, CE Class A, CCC, BIS, CB
Environment
condition
Operation: 5 ~ 40°C, 25 ~ 85% non-condensing
Storage: -40 ~ 60°C, 10 ~ 90% non-condensing
Environmental
concern
Comply with RoHS, REACH, WEEE
9
2. Operations Overview
2.1 Unpacking and Inspection
This printer has been specially packaged to withstand damage during shipping. Please
carefully inspect the packaging and printer upon receiving the bar code printer. Please retain
the packaging materials in case you need to reship the printer.
Unpacking the printer, the following items are included in the carton.
◼One printer unit
◼One quick installation guide
◼One power cord
◼One external universal switching power
supply
◼One USB interface cable
◼One core coated art paper roll
◼One Windows labeling
software/Windows driver CD disk
◼One label roll holder
If any parts are missing, please contact the Customer Service Department of your purchased
reseller or distributor.
10
2.2 Printer Overview
2.2.1 Front View
2.2.2 Interior View
6
7
1. Printer top cover
2. Top cover open tab
3. Gap transmitter
4. Media holder
5. Media guide
6. Black mark paper sensor、Gap
receiver
7. Front-end label return sensor
8. Platen roller
5
4
1
2
3
1. ONLINE indicator
2. ERROR indicator
3. PAUSE button
4. FEED button
5. WINDOWS (The windows can
look through)
8
1 2 34
5
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Gainscha Etichettatrice
