Galaxy Audio Dhtrquad Manuale utente

U H F

DHTRQUAD

MAKERS OF THE ORIGINAL

HOT SPOT PERSONAL MONITOR

USER'S MANUAL

WIRELESSMICROPHONESYSTEM

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT

SYNC

Contents

System Components..........................................1

Rack-Mounting the Receiver...............................2

HH64/HH64SC Handheld Transmitter.................3

MBP64 Bodypack Transmitter.............................4

MBP76 Bodypack Transmitter.............................5

SM-W76 Wireless Shockmount Base..................6

System Setup.....................................................7

Setting up multiple receivers...............................8

Functions of the DHTRQUAD Receiver................9

Troubleshooting.................................................10

Specifications....................................................11

Accessories and Replacement Parts.........................12

DHTRQUAD Frequency Chart....................................13

DHTRQUAD System

Thank you for purchasing the DHTRQUAD wireless system. For users who need an

advanced UHF wireless system, the DHTRQUAD provides an excellent solution.

With 120 selectable channels, the DHTRQUAD is perfect for applications such as

live shows, broadcast, meetings, & musical instruments. Touch buttons and liquid

crystal displays allow for a quick and simple system setup. The "User Guide"and"

Quick Setting Guide" included in your system will provide all the details you need to

operate the system efficiently.

Frequency Band

Most countries closely regulate the radio frequencies used in the transmission of

wireless information. These regulations state which devises can use which

frequencies, and help to limit the amount of RF (radio frequency) interference in all

wireless communications. The DHTRQUAD offers 120 selectable channels within

either the 584-607MHz (Code D) or 655-679MHz (Code L) frequency ranges.

To facilitate system setup and protect against RF interference, each system comes

with multiple predefined frequency groups and channels. When using a single

receiver/transmitter, the operating frequency will generally not have to be changed.

In an installation with multiple receivers/transmitters, each set must operate on a

separate channel from the others. The group and channel system provides an

optimum frequency spread when using multiple receiver/transmitter systems.

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT 

SYNC

All systems include:

DHTRQUAD Receiver

¼" to ¼" Audio Cable

Power Supply

Two Antennas

Extension Kit

Rack Ears

User Guide

Transmitter Options:

System Components

OFF

CHANNEL

INFRARED

BATT

System Components

OFF

CHANNEL

INFRARED

BATT

HH64 / HH64SC Handheld Mic/Transmitter

MBP76

Body Pack

Transmitter

Visit our website

www.galaxyaudio.com

to see all of our great

headset & lavalier

options

SM-W76 Wireless Shockmount Base

HH64 / HH64SC Handheld Mic/Transmitter

MBP64

Body Pack

Transmitter

LAMP

POWER

ASC

GROUP CHANNEL

BATT

MBP64

Rack-Mounting the Receiver

Maintain a line of sight between

transmitter and antenna.

Ten BNC connecting cables (included)

Two BNC connectors (included)

Rack-Mounting the Receiver

Rack Ears

MREDHTQUAD

Antenna

Extension

Cable

EXTBNC

Rack-Mounting the Receiver

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT

SYNC

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT

SYNC

Shown with optional

ANT-DISTDC

antenna distributor.

Four DHTRQUAD receivers

ANYSP TO ®

ANT-D IS TDC

UHF AN TENN A DISTR IBUTO R

POWE R

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT

SYNC

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT

SYNC

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT

SYNC

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT

SYNC

Panel mount

BNC feed-through

connectors

CN-BNCPM

1. BNC Cables

2. Power Supply Cable

H H H H

M M M M

L L L L

SQL SQL SQL SQL

Channel 4

XLR balanced

Antenna-B Antenna-BChannel 4

XLR balanced

Channel 4

XLR balanced

Channel 1

XLR balanced

8 in 1 Mix

XLR balanced

4 in 1 Mix

Unbal output

H H H H

M M M M

L L L L

SQL SQL SQL SQL

Channel 4

XLR balanced

Antenna-B Antenna-BChannel 4

XLR balanced

Channel 4

XLR balanced

Channel 1

XLR balanced

8 in 1 Mix

XLR balanced

4 in 1 Mix

Unbal output

H H H H

M M M M

L L L L

SQL SQL SQL SQL

Channel 4

XLR balanced

Antenna-B Antenna-BChannel 4

XLR balanced

Channel 4

XLR balanced

Channel 1

XLR balanced

8 in 1 Mix

XLR balanced

4 in 1 Mix

Unbal output

H H H H

M M M M

L L L L

SQL SQL SQL SQL

Channel 4

XLR balanced

Antenna-B Antenna-BChannel 4

XLR balanced

Channel 4

XLR balanced

Channel 1

XLR balanced

8 in 1 Mix

XLR balanced

4 in 1 Mix

Unbal output

H H H H

M M M M

L L L L

SQL SQL SQL SQL

Channel 4

XLR balanced

Antenna-B Antenna-BChannel 4

XLR balanced

Channel 4

XLR balanced

Channel 1

XLR balanced

8 in 1 Mix

XLR balanced

4 in 1 Mix

Unbal output

H H H H

M M M M

L L L L

SQL SQL SQL SQL

Channel 4

XLR balanced

Antenna-B Antenna-BChannel 4

XLR balanced

Channel 4

XLR balanced

Channel 1

XLR balanced

8 in 1 Mix

XLR balanced

4 in 1 Mix

Unbal output

H H H H

M M M M

L L L L

SQL SQL SQL SQL

Channel 4

XLR balanced

Antenna-B Antenna-BChannel 4

XLR balanced

Channel 4

XLR balanced

Channel 1

XLR balanced

8 in 1 Mix

XLR balanced

4 in 1 Mix

Unbal output

H H H H

M M M M

L L L L

SQL SQL SQL SQL

Channel 4

XLR balanced

Antenna-B Antenna-BChannel 4

XLR balanced

Channel 4

XLR balanced

Channel 1

XLR balanced

8 in 1 Mix

XLR balanced

4 in 1 Mix

Unbal output

12~18

3000mA

OUTPUT4

600mA

OUTPUT3

600mA

OUTPUT2

600mA

OUTPUT1

600mA

DC IN

ANT-1 ANT-2 ANT-3 ANT-4 ANT-5 ANT-6 ANT-7 ANT-8 ANTENNA-A

ANTENNA-B

ANT-DISTDC

ANT-DISTDC Info

The ANT-DISTDC will provide

DC power to operate up to

4 DHTRQUAD Receivers.

Condensor mic

Dynamic mic

LCD screen

Please See “system setup ” on page 8.

Power Switch

Microphone Input Sensitivity Control.

Left turn for output level decrease, right

turn for output level increase.

IR Port receives infrared beam to synchronize frequencies.

Functions:

GROUP CHANNEL

INFRARED

BATT

GROUP CHANNEL

INFRARED

Changing Batteries:

Batteries should be replaced when LCD indicator flashes.

Unscrew the battery cover as shown below. Install

two AA alkaline batteries, while observing correct polarity

indicators in the battery tray.

Expected life for two AA alkaline batteries is 8 hours.

HH64/HH64SC Handheld Transmitter

LAMP

POWER

ASC

BATT

Antenna.

Gain Switch.

There are three Gain settings on the MBP64. Select the

setting most suitable to your application.

Mic: Microphone Level

0: Guitar Level

-10dB: Line Level

Low Voltage/IR Transmission LED.

LED On: Battery Voltage OK.

LED Off: the Battery Voltage is Low.

Flashing LED: IR transmission is in progress

3-pin Input Jack.

Power/Backlight Control button

Press and Hold for Power On/Off.

Press and Release for Back-light On/Off.

ASC Frequency Synchronization Button.

Press this button to automatically set the Transmitter frequency

to match that of the Receiver. Use in conjunction with Receiver’s

ASC control.

LCD screen

See “system setup” on page 8.

IR Window Point this window towards IR window on Receiver during

ASC frequency synchronization.

BodyPack Transmitter Functions:

How to Wear the Bodypack Transmitter:

Slide the transmitter clip onto the belt or run a guitar strap

through the transmitter clip , as shown in the diagram at left.

Battery Replacement :

The life expectancy of two alkaline batteries is about six hours.

When the BATT indication symbol on the display screen is

flashing as shown in the diagram below, the batteries should be

replaced immediately, as shown in the diagram on the left.

GROUP CHANNEL

BATT

- -

+ +

Open

MBP64 Bodypack Transmitter

sel ect

Open Close

Wearing the Backpack Transmitter:

Clip the transmitter to a belt . For best results, slide the

transmitter down until the belt is pressed against the base

of the clip. Or, slide a guitar strap through the transmitter

clip ,as shown.

Changing batteries:

Expected life for Two Alkaline batteries is approximately 6 hours.

Replace batteries when the Green Power LED and the LCD

Battery Indicator (shown below) begin to blink.

Features

Antenna.

LCD panel.

Please see (System Setup) on Page 7.

Power/ASC/ Low Battery Indicator.

Constant Green: Power ON.

Flashing Green: IR ASC in progress, or Low Batteries.

Mute Indicator.

Constant Red: Audio Muted.

Power/Mute Button.

Push and Hold for Power On/Off. Push once for Mute On/Off.

IR Window.

Receives IR signals (ASC) to synchronize with Receiver.

Select Button.

Please see (System Setup) on Page 8.

3-pin Microphone Input Jack.

Gain Adjustment Switch.

Three gain settings are available. Choose the

appropriate setting for your application:

Mic: Microphone

0dB: Guitar with passive pickups

-10dB: Guitar with active pickups, or Line Level Signals.

Note: To prevent accidental power or mute changes

during a performance, you may set the Lock function by

a simultaneous press and release of buttons 5 and 7. This

will disable all buttons and a “lock” icon will appear in the

LCD. Repeat procedure to return to normal operation.

MBP76 Bodypack Transmitter

SM-W76 Wireless Shockmount Base

1. Adjust the 16 position rotary knob on the rear of the SM-W76 base to change

the frequency. A small flat headed screwdriver can be used.

2. Use the chart to set up the DHTR/TRCR Group & Channel to the frequency

that corresponds to the SM-76 base.

3. Once the Group & Channel of the receiver is set, press the gray button on the

top of the SM-76 base to turn the microphone on.

Handheld

Transmitter

Bodypack

Transmitter

Receiver Programming

System Setup

GROUP CHANNEL

ANTENNA

GROUP

SELECT

SELECT SELECT

CHANNEL CONTROL

AUTO VOLUME

MANUAL

CHANNEL

FREQUEN CY

DISPLAY

MHz

SELECT LIST

EXIT

MASTER

GROUP CHANNEL

ANTENNA

GROUP

SELECT

SELECT SELECT

CHANNEL CONTROL

AUTO VOLUME

MANUAL

CHANNEL

FREQUEN CY

DISPLAY

MHz

SELECT LIST

EXIT

MASTER

GROUP CHANNEL

ANTENNA

GROUP

SELECT

SELECT SELECT

CHANNEL CONTROL

AUTO VOLUME

MANUAL

CHANNEL

FREQUEN CY

DISPLAY

MHz

SELECT LIST

EXIT

MASTER

GROUP CHANNEL

ANTENNA

GROUP

SELECT

SELECT SELECT

CHANNEL CONTROL

AUTO VOLUME

MANUAL

CHANNEL

FREQUEN CY

DISPLAY

MHz

SELECT LIST

EXIT

MASTER

GROUP CHANNEL

ANTENNA

GROUP

SELECT

SELECT SELECT

CHANNEL CONTROL

AUTO VOLUME

MANUAL

CHANNEL

FREQUEN CY

DISPLAY

MHz

SELECT LIST

EXIT

MASTER

Group and Channel Selection:

Press “SET” button twice, “GROUP SELECT” will display,

press or to choose the appropriate frequency group.

Press “SET”again , “MANUAL CHANNEL SELECT” will display,

press or to choose the appropriate channel.

For best results when operating multiple systems, set all systems to

a single group, then set each system to a unique channel within that

group.

Auto Frequency Finder function on the Receiver:

Choose “AUTO CHANNEL SELECT” by pressing “SET” once,

then press or . Receiver will automatically find a clear

frequency with no interference.

Receiver Volume Setting:

The receiver has an electronic volume control. Press or

from the normal display (00 to 63)

Normal Display:

Frequency and Antenna A/B (RF Received).

Transmitting frequency automatic setup:

Place the Transmitter “IR” window to face the Receiver “IR” window.

Then press the “ASC” button on the desired Receiver. The Transmitter

will automatically match the Receiver frequency.

Attention: The distance between the Receiver and Transmitter

IR windows should be less than 0.5m during the ASC IR setup. When

setting up multiple Transmitters/Receivers, activate the ASC function

of only one Transmitter and Receiver at a time.

MBP76 Transmitter Status Display

Battery Status:

Battery Status Indicators for both the Handheld and Bodypack

Transmitters feature Four Level Displays.

Group and Channel Display:

After completing the ASC, both the Handheld and Bodypack

Transmitters will display the Group and Channel numbers selected.

Normal Display:

Both Handheld and Bodypack Transmitters will display Group and

Channel numbers as well as Battery Status.

Setting up multiple receivers

1) Power on any pre-existing wireless systems and transmitters except the first DHT system.

2) Power on the first DHT Receiver.

3) The Control and set buttons are on the front of the receiver.

4) Press the set button until the group number flashes on the LCD screen

5) Press the up/down buttons to select group 1.

6Press the set button twice to get to the scan mode.

7) Press the up or down button. The unit will now go into scan mode. You will probably see the RF

meters light up if the scan sees other transmitters.

8) When it stops scanning, it will stop on the clearest frequency, and will be flashing the frequency

on the LCD screen.

9) Press the set button and it will set itself to that frequency. Do not wait to press the set button as

the DHT Receiver will revert back to the original frequency, and the process will need to be restarted

10) If the unit cannot find a good frequency within group 1, start the process again scanning

group 2, if that is also not clear try group 3, and so on till you get a good frequency.

When the DHT Receiver has been set to a clear frequency, use the ASC feature to sync the

receiver frequency to the transmitter.

11) Turn the transmitter on, aim the red infrared window on the transmitter towards the one on

the receiver and press the ASC button on the front of the receiver. The transmitter will sync to

the receivers frequency.

If you have more DHT systems to tune follow the same procedure on each one, always leaving

the previous system transmitter on.

UHF Four Channel

Diversity Wireless Receiver

DHTRQUAD

POWER

ANYSPOT

SYNC

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Galaxy Audio Sistema microfonico

Galaxy Audio

Galaxy Audio BE HEARD PSE Manuale utente

Galaxy Audio

Galaxy Audio Galaxy Trek GT-INST-6 Manuale utente

Galaxy Audio

Galaxy Audio DHT Any Spot Manuale utente

Galaxy Audio

Galaxy Audio ANY SPOT Manuale utente

Galaxy Audio

Galaxy Audio Galaxy Trek GT-INST-3 Manuale utente

Galaxy Audio

Galaxy Audio Any Spot DHT-QUAD Manuale utente

Galaxy Audio

Galaxy Audio BE HEARD ECM Manuale utente

Galaxy Audio

Galaxy Audio DHXR4 Manuale utente

Galaxy Audio

Galaxy Audio AS-900-4 Manuale utente

Galaxy Audio

Galaxy Audio ECD Any Spot ECDR Manuale utente

Galaxy Audio

Galaxy Audio DHT-QUAD Manuale utente

Galaxy Audio

Galaxy Audio GALAXY Trek GT-V Manuale utente

Galaxy Audio

Galaxy Audio ANY SPOT Manuale utente

Galaxy Audio

Galaxy Audio Galaxy Trek GT-V Manuale utente

Galaxy Audio

Galaxy Audio ECD Any Spot Manuale utente

Galaxy Audio

Galaxy Audio AS-1100 Manuale utente

Galaxy Audio

Galaxy Audio ANY SPOT AS-HH5CK Manuale utente

Galaxy Audio

Galaxy Audio EDX Manuale utente

Galaxy Audio

Galaxy Audio VES Manuale utente

Galaxy Audio

Galaxy Audio ANY SPOT Manuale utente

Galaxy Audio

Galaxy Audio Special Projects EVO Scan16 Manuale utente

Galaxy Audio

Galaxy Audio HOT SPOT Manuale utente

Manuali Sistema microfonico popolari di altre marche

Paso

Paso R824 Manuale utente

Naxa

Naxa NAM-982 Manuale utente

Motorola

Motorola PMNN4461 Manuale utente

Xvive

Xvive U3 Manuale utente

Tekon

Tekon DUOS Manuale utente

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manuale utente

Devine

Devine WMD-IE Manuale utente

LG LF-D7150 Manuale utente

GE S768DAV Manuale utente

LD U305 HBH 2 Manuale utente

Chainway

Chainway URA8 Manuale utente

ORATOR

ORATOR D860TD Manuale utente

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuale utente

Alpha Technologies

Alpha Technologies RBMS Manuale utente

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manuale utente

Shure

Shure UA844 Manuale utente

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuale utente

Pyle

Pyle PDWM5000 Manuale utente