4
l POWER: Power on and off
l VOLUME: Turn to adjust the volume (AUX IN is unaffected by the volume control).
l BAND: Switch for AM or FM1 / FM2
l MO/ST: Switch for mono or stereo
l AUX IN: Connect to external audio source (Media Player or Phone) via 3.5mm AUX Cable
l LED ON/OFF: Turn button back light on and off
lAF : Alternative Frequency
If the current signal is weak, assuming an alternative frequency is available for the station, press AF.
RDS will search a different frequency with stronger signal with same station.
lDISP: Display
By pressing DISP, the current station will show the Program Service or PS. If the station has no PS
available, it will show “NO PS”. Example, if Classic FM is tuned in, the display may show CLASSIC or
PS instead of the frequency.
lPTY : Program Type
Radio stations can assign different program types to their shows. These can be picked up by an RDS
radio. Press PTY, LCD shows the radio program type, such as news, sports or drama. If the radio
station does not assign the program type for the program, LCD shows “NO PTY”.
lTA : Traffic Announcement
Press TA, RDS will automatically search for the traffic or travel stations. It will stop at the travel or traffic
station.
Operation
Station Select
RDS Function
Operation and Functions
Operation and Functions
lPress “BAND” to select FM 1, FM 2, or AM frequencies. There are 10 memory locations in each band.
lPress “˅ TUNING / TUNING ˄” to select channel. Press and hold for about 2 seconds to enter into
automatic scan searching. After receiving a channel, it will stop automatically and begin to play.
Channel Memory Function
● There are 30 user assignable memory channels. FM 1 x 10 / FM 2 x 10 / AM x 10
● First tune to the station you want to store.
● Press “MEMORY”
● Press “1~5” or “+5” and “1~5” To select the number of the memory channel.
● Press “MEMORY” again to confirm memory. Example: Pressing Memory, then 3, and then memory again
will set it to 3, in which the display will show CH3.
● To store a memory higher than 5, press “MEMORY” then “+5”, then press a 1-5, and press Memory
again. Example: Pressing Memory, then +5, then 3, then Memory again, will set it to CH8.
● Repeat above steps to store more channels.
● To select the memory channel, press “MEMORY UP” or “M1~M5” or “+5” and “M1~M5”.
Example: To go to M8, Press MEMORY UP until you reach M8, or press +5 and M3.
RADIO TUNING RANGE
FM 87.5 MHz – 108 MHz / AM 530 KHz – 1720 KHz
Radio Memory Function
