Gamatech PK300DC Manuale utente
PK300DC/PK350DC
Swing Gate Opener
User Manual
1
Dear users,
Thank you for choosing this product. Please read the manual carefully before assembling and using it.
Please do not leave out the manual if you send this product to a third party.
1. Safety Instruction
Please ensure that the using power voltage matches with the supply voltage of gate opener
(AC110V or AC220V); kids are forbidden to touch the control devices or the remote-control unit.
The remote-control unit is controlled by a single button mode or three button mode (please refer to
the instructions of the remote control in accordance with the actual gate opener type). The indicator
light on the remote-control unit will flicker when the button on it is pressed. Main engine and gate
can be unlocked by disengagement wrench and the gate can move with manual operation after
disengagement.
Please ensure that no one is around the main engine or gate when the switch is operated and it is
usually demanded to examine the stability of installation. Please temporarily stop using if the main
engine needs repairing or regulation.
The installation and maintenance of the products must be carried out by professionals.
2
2. Packing List (standard)
No.
Picture
Name
Quantity
1
Main engine
2
2
Manual release bar
1
3
A
B
C
D
A
B
C
D
Remote control
2
4
Control box
1
5
Wall bracket
4
6
Front mounting bracket
2
7
Connecting bracket
2
8
Mounting screw (short)
2
9
Mounting screw (length)
2
10
Screw M8×25
4
11
Nut M8
8
3
No.
Picture
Name
Quantity
12
Limit stopper
1
2. Packing list (optional)
No.
Picture
Name
Quantity
1
Infrared sensor
1
2
0
8
5 6
97
4
1 2 3
Wireless keypad
1
3
Alarm lamp
1
4
Electronic lock
1
5
Storage battery
2
3. Technical parameters
Model
PK300DC
PK350DC
Power supply
220V/50Hz;110V/60Hz
220V/50Hz;110V/60Hz
Motor power
80W
80W
Gate moving speed
18~22 second per 90 (approx)
18~22 second per 90 (approx)
Max.single-leaf weight
300Kg
300Kg
Max.single-leaf length
2.5M
3.0M
Max.piston stroke:
34cm
54cm
Max.force
1500N
1500N
Remote control distance
≥30m
≥30m
Remote control mode
Single button mode
Single button mode
Storage battery (optional)
24V or 12 VDC
24V or 12 VDC
Noise
≤58dB
≤58dB
Working duty
S2, 30min
S2, 30min
Recording of up remote controls
25
25
Frequency
433.92 MHz
433.92 MHz
4
Working temperature
-20°C - +70°C
-20°C - +70°C
Package weight
17Kg
19Kg
4. Installation
PK300DC/PK350DC swing gate opener is applicable to single leaf gate weight less than 300kg, and
length of the single leaf swing gate should be less than 2.5m/3m. The drive mode adopts the worm
and worm gear to combine the screw rod transmission. This gate opener must be installed inside
the enclosure or yard for protection.
4.1 Installation drawing
0
8
5 6
97
4
1 2 3①
③
④
⑤
②
⑧
⑥
⑦
⑦
⑦
A
B
C
D
Figure 1
①Control box; ②Gate opener; ③Gate; ④Alarm lamp (optional);
⑤Infrared sensor (optional); ⑥Stopper; ⑦Remote control; ⑧Wireless keypad (optional);
4.2 Size of main engine and accessories
4.2.1 Size of main engine
5
190
970Max
620Min
104
PK300DC
190
1370Max
820Min
104
PK350DC
Figure 2
6
4.2.2 Size of mounting plate
40
2×8.5
70
8.5
17.5
43
Front mounting bracket Wall bracket
φ
Figure 3
4.3 Installation steps
4.3.1 Preparation before main engine installation
a) Before installing the door opener, please confirm the correct installation of the door to ensure that
the door can be easily manually operated, and the door safety stopper can effectively prevent the
door to continue moving.
b) Install the electric lock, the distance between the door bottom and ground should be 40-50mm. If
not install the electric lock, the distance between door bottom and ground should be ≥20mm;
c) The main engine recommended mounting height is about 300 ~ 800mm from the ground, and
make sure there are reliable fixed points for mounting brackets.
Cable
In order to ensure the normal operation of the door opener and protect the cable from damage,
please use PVC pipe laying motor, power cable, and control cables, and separate two PVC pipes to
lay (motor and power cable) and (control cable), respectively.
Mounting brackets
In order to install the PK300DC / PK350DC main engines firmly, recommend to use the expansion
screws to fix the mounting brackets.
4.3.2 Accessory
a) Before installing the main engine, install the wall bracket on the wall, then fix the connecting
bracket, and install the front mounting bracket on the door.
Note: Please detect by gradienter before fixing, to ensure that the front mounting bracket
and the connecting bracket in the same level.
7
Expansion screw Hexagon screw
Nut Nut
Hexagon screw
Figure 4
b) The connecting bracket and the wall bracket can be connected according to different conditions,
as shown in figure 5.
Figure 5
c) Users shall prepare power cables for the control box and main engines, according to different
installation environment, the power cable of the control box is not less than 3 cores, and the power
cable of the control box with 2 cores. If you need to install electric locks, infrared sensor, alarm lamp,
external button switch and other external equipment, please increase corresponding the embedded
wire, and the sectional area of electric lock cable core shall not be lower than 1.5mm², others shall
not be lower than 0.5mm². The length is determined by the user of according to the situation in the
installation site.
Note: The pipe outlet should be facing down to avoid rain water entering the pipe along the cable.
d) Before the installation, please unlock the main engine. Method: Remove the cover, insert the
manual release bar, rotate the bar until the release, as shown in Figure 6, then turn the telescopic
arm to make it easily stretch.
8
Left engine Right engine
Figure 6
4.3.3 Main engine installation
As shown in Figure 7, the tail of the main engine and the connecting bracket are fixed together
through the installation of screws, and then manually adjust the telescopic arm to the appropriate
length, and finally fix the telescopic arm connector and the front mounting bracket with the
installation screws. Pull the door after the completion of the installation to ensure the entire process
flexible without jamming.
Mounting screw (length)
Nut Mounting screw (short)
Nut
Figure 7
9
Installation direction: door open facing inward (PK300DC)
Note:Note: LimitLimit stopperstopper mustmust bebe installedinstalled
L
K
L=620+5L=620+5
K＜620+340620+340
A
B
Figure 8
100 110 120 130 140 150 160 170 180 190 200
100
110
120
130
140
150
160
170
180
190
200
Max 90°
Max 100°
Max 110°
Max 120°
mmmm
B
A
Figure 9
Note: Value B must be close to or equal to the value A to obtain the best mechanical
advantage.
Questo manuale è adatto per i seguenti modelli
1
Indice
