Ganz Digimaster DR-4FX1 Manuale utente

(FW Version 1015xx)

２

CONTENT

MONITORING ARCHIVING

3 Start up / Shutdown 59 To start the Archive menu

5 Live Screen At a Glance

SYSTEM SETTING WEB VIEWER

12 To move to the System Setup menu 62 What is the Web Viewer?

13 Camera Setting 64 Live

19 Display Setting 68 Search

24 Audio Setup 70 Setup

25 User Setting

27 Network Setup

30 System Setting

34 Storage

37 Event Setup

RECORD SETTING MOBILE VIEWER

46 To start the Record Setup menu 82 GanzView

47 Record Setup

SEARCH ARCHIVE VIEWER

52 To move to the Search menu while 94 Getting started with the Backup Play

in monitoring 95 Backup Player At a Glance

52 To move to the Search menu while

in playback mode

PLAY APPENDIX

56 If you want to play 98 Specification

３

Monitoring

Start Up/ Shutdown

START

You can connect DVR to a PC in the same network and control or manipulate it on the PC monitor.

1. Connect the adaptor to the 12VDC power input port in the rear panel of DVR.

Make connection when the power is not applied yet.

2. Connect AC cable to the power source. With a beep, the logo screen appears several

seconds after the front LED turns on.

3. When the booting process is completed, the live screen then the login screen appears.

To manipulate or access the menus of DVR, you should have logged in.

1. When the system starts, the login screen appears.

2. Select a user and provide the password.

The default password of the "ADMIN" account is

"1234".

3. Click <OK>.

If the login information is correct and valid, you will

see the live screen.

For safe and secure use of the product, change

the password after purchasing.

Log Out

To prevent unauthorized access, it is recommended to log out when you leave the screen.

Hover the cursor near the bottom of the screen to display the menu.

1. In the monitoring screen, click <MENU> in the

bottom left corner of the screen to <LOG OUT>,

or press the [LOGOUT] button on the remote

control.

2. While logged out, Search / Backup /

System Setup / Record Setup / System Shutdown

menus are restricted to use.

４

Monitoring

System Shutdown

You can connect DVR to a PC or mobile device in the same remote network and control or

manipulate it on the monitor of the PC or mobile device

1. In the monitoring screen, click <Menu> in the

bottom left corner of the screen to <SHUTDOWN>

the system, or press the [POWER] button on the

remote control.

2. Use the virtual keyboard to enter the password.

3. Be sure to disconnect the power in the rear panel.

If you turn off the system in an abnormal manner such as removing the power cord while the

system is in operation, the disk will have or increase the bad sectors, causing data loss and

shortened life cycle of the disk.

５

Monitoring

Live Screen At a Glance

The live screen largely consists of three components: video window, status bar and timeline zone.

Video Window

Icons used in the video window.

ITEM

Description

Camera ID

Show the camera ID

Record Mode Icons

Displayed if an event recording is reserved.

Display the status of the continuous recording.

Display the recording status when an alarm occurs.

Display the recording status when a motion event occurs..

Display the status of the emergency recording..

Audio Icon

The audio signal of the connected camera is outputting.

Motion Detection Icon

A motion is detected by the connected camera.

Status Bar

Timeline

Quick Menu

Video Window

６

Monitoring

Status Bar

Press the ▼button on the remote control, or place the mouse in the lower area of the screen to

display the status bar.

ITEM

Description

Menu Button

Select one of the system setup, search and backup menu items

before accessing it.

User ID

Show the ID of the user who has currently logged in.

Screen

Control

Buttons

Change the screen layout so that both status bar and timeline are

displayed at all times.

Select a split mode.

Select Auto Sequence or Special Split Mode.

Display or hide the OSD menu on the screen.

PTZ

Move to the PTZ screen. You can control the PTZ operations of a

PTZ-compliant camera on the PTZ screen.

Zoom

Move to the Digital Zoom.

Quick Log

Display the log list of the recent recording events.

Audio

Channel

Selection

Button

You can use the camera supporting the audio input to listen to the

audio.

Panic Record

Start the panic recording.

Alarm Indicator

Turns on if an event occurs. It does not turn on if no reaction to the

event is yet defined.

Click this to check the information of the event that occurred.

Network

Connection

Status

Check if network connection is made via an external PC or mobile

device. Click this to view the details of the concurrent users and to

check the network connection status. For more information, refer to

"Network Setup". (page 40)

Disk Space

Show the disk space information. If you have set the disk overwrite

mode, it will be displayed "OW" (Over Write) from the start point of

the overwriting. Click this to view the details of the disk status.

For more information, refer to "Record Setup".

Date & Time

Display the current time and date.

７

Monitoring

Timeline

Press the [▶] button on the remote control or move the cursor to the right of the screen to display

the timeline. Double-click the timeline to move to the video screen. Drag and drop it to make backup

or event search for the specified area.

ITEM

Description

Timeline Date

Display the date of the current timeline.

Click this to select a desired date of the timeline.

Expand/

Collapse

the timeline

Expand or collapse the timeline.

Navigation

through

Timeline

Navigate through the timeline.

You can also use the mouse wheel to do the navigation..

Timeline Bar

Display the recording data with time. The color of each bar indicates

the following:

Green : Continuous Recording

Red : Alarm Recording

Blue : Motion Recording

Yellow: Panic Recording

Quick Menu.

ITEM

Description

Channel No

Display the number of the current channel.

Play

Start playing the video of the selected channel from the specified time.

Zoom

Zoom the video of the selected channel.

Snapshot Capture

Capture the current live video and save it in the jpeg format.

Then, you can save the captured image in the USB device.

８

Monitoring

Using the status bar in the live mode

Selecting a split mode

Click a desired split mode from 1, 4, 9, 6, 8 and 16 split screen. Or press the [DISPLAY] button on

the remote control until a desired split mode is displayed.

4CH DVR model support only 1 and 4 split screen modes.

8CH DVR model does not support 16 split screen modes.

Auto sequence

Click the Sequence button in the status bar, or press the [SEQ] button on the remote control to

perform the specified sequence mode.

You can configure the sequence settings in <SEQUENCE>.

For details, refer to “Sequence”. (page 35)

Controlling PTZ

You can control PTZ cameras connected to each channel.

Use the mouse to click PTZ button on the status bar, or

press the [PTZ] button of the remote control to initiate

the predefined sequence.

In PTZ mode, use buttons on the screen to control PTZ or use [ZOOM], [FOCUS] and

[PRESET] buttons of the remote control.

Select Preset

Record/Screen Control/ Zoom

Zoom/Focus/Iris Adjustment

Move

SCAN/TOUR

Settings

９

Monitoring

Digital Zooming

You can enlarge the monitoring screen for better view.

Zooming will enlarge the video of the selected channel. If no channel is selected, channel 1 will be

zoomed.

1. Click Zoom in the status bar or move the cursor

to a desired channel and right-click it to display

the context menu. Select <ZOOM>.

You can also press the [ZOOM] button on the

remote control.

2. Move to the zoom control screen. When the

menu bar appears in the right bottom, use the

buttons to control the zooming.

Select a channel to zoom in/out.

Zoom out the current (enlarged) image step by step.

Enlarge the current image step by step.

Zoom Box : Use the yellow box to move to or select a desired zooming area.

Exit the zooming screen and return to the live screen.

To check the event log

You can check the log of the events that occurred.

1. Click Log to display the “EVENT LOG” window.

The log list is sorted with the latest one on top.

2. Double-click a desired log to display the event

video.

You will move to the play screen of the selected

log.

To select an audio input channel

Select a channel from which the audio signal will be received.

>CHANNEL : Produces the selected channel’s

Audio, regardless of the split screen mode.

>LINK TO FULL SCREEN :When switching the

DVR display mode to view one channel, it

Produces the selected channel’s audio.

１０

Monitoring

To check the alarm status

You can check the alarm status of each camera.

Click <OK> to close the window

To check the network status

Shows connection status of camera and network devices.

Click to display detailed information on current users and network connection

Click <OK> to close the window.

For more information, refer to "Network Status".

(page 40).

To check the disk status

You can check the storage space of the current disk

and check also if there is any problem with the disk.

Click <OK> to close the window.

For more information, refer to "Disk Information".

(page 47)

Altri manuali per digimaster DR-4FX1

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ganz Registratore digitale

Ganz

Ganz Digimaster DR4HL Manuale utente

Ganz

Ganz ZR-DH1621NP Manuale utente

Ganz

Ganz DIGIMASTER DR-16M55-RA-4TB Manuale utente

Ganz

Ganz ZR-DHC1630NP Manuale utente

Ganz

Ganz Digimaster Series DR8HRD Manuale utente

Ganz

Ganz DR16NRT Manuale utente

Ganz

Ganz ZR-DH921NP Manuale utente

Ganz

Ganz AI BOX 4CH Manuale utente

Ganz

Ganz NR4HL Manuale utente

Ganz

Ganz DIGIMASTER SERIES Manuale utente

Ganz

Ganz digimaster DR-4FX1 Manuale utente

Ganz

Ganz DIGIMASTER DR-16FX5-3TB Manuale utente

Ganz

Ganz CDR-01S Manuale utente

Ganz

Ganz NR8-32M78 Manuale utente

Ganz

Ganz Digimaster DR4N-Lite Manuale utente

Ganz

Ganz ZR-DHC830NP Manuale utente

Ganz

Ganz DIGIMASTER DR4N Manuale utente

Ganz

Ganz DR8NRT Manuale utente

Ganz

Ganz DIGIMASTER DR8HV Manuale utente

Ganz

Ganz DR8NRT Manuale utente

Ganz

Ganz PixelMaster PRO NR16H Manuale utente

Ganz

Ganz DR-16F44-AT Manuale utente

Ganz

Ganz ZR-DH1621NP Manuale utente

Ganz

Ganz DigiMAster DR4H Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente