Garden Gear D5942 Manuale utente
For correct usage, read these instructions carefully and keep in
a safe place for future reference
After Sales Support
Call 0871 911 7031
Email
Product Code: D5942
Thank you for purchasing this product, which
has been made to demanding high quality
standards and is guaranteed for domestic use
against manufacturing faults for a period of
12 months from date of purchase
Pole Chainsaw
Instruction Manual
2
INTRODUCTION
Congratulations
You have made an excellent choice with the purchase of this quality Garden
Gear product.
By doing so you now have the assurance and peace of mind which comes
from purchasing a product that has been manufactured to the highest
standards, performance and safety.
We want you to be completely satisfied with your purchase, so this Garden
Gear product is backed by our full 12 month manufacturers guarantee
and an outstanding after sales service through our dedicated Helpline.
Register your product for an extended 2-year warranty by visiting our website
www.gardengearonline.co.uk. The product must be registered, along with
your contact information, within 30 days of purchase. For full terms and
conditions please visit our website.
We hope you enjoy using your purchase for many years to come.
3
Technical specifications
Voltage/frequency
230V-240V~50Hz
Input power
600W
Pitch
3/8¨
No-load speed
10m/s
Total length
2.05m-2.65m (without guide bar)
Cutting length
250mm
Weight
3.75Kg
Safety information and general warnings
•Read these instructions fully and make sure you understand the manual
and labels affixed to the pole chainsaw before use.
•This appliance is approved solely for use in accordance with the
description and safety instructions specified in this user manual.
•Before starting work ensure that the area is cleared of any obstacles.
Always keep your work area clear.
•Never wear loose clothing, shorts or jewellery whilst using the pole
chainsaw and wear closed, solid shoes with a good grip.
•Wear appropriate personal protective clothing during use, such as eye
and hearing protection.
•Do not overreach. Always keep a firm footing and maintain your balance
during operation. Do not use the pole chainsaw whilst on a ladder.
•Do not use the pole chainsaw close to flammable materials or in dry dusty
environments.
•Store in a cool dry place away from animals and children.
•Check the pole chainsaw and cable regularly for any damage before
use, do not use if it has been dropped or damaged.
•Suitable for outdoor use only.
•Do not use in wet weather, wet areas or in areas where gases or other
flammable materials are stored.
•Not suitable for use in frozen or snowy conditions.
•Do not use in wet or windy conditions.
•If operating the product in damp conditions is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
•Only use an approved extension cable suitable for the power input of the
machine, the minimum conductor size is 1.5mm2.
•When using a cable reel, always unwind the reel completely.
•Inadequate extension cords can be dangerous. If an extension cord is
used, it must be suitable for outdoor use, and the connection must be
kept dry and off the ground.
•Keep cutting tools sharp and clean.
•Keep the pole chainsaw in good clean condition.
•Do not use the pole chainsaw if you are tired or under the influence of
drugs or alcohol.
4
•Do not operate the pole chainsaw near electrical cables, telephone lines,
pipes or hoses.
•If the pole chainsaw strikes a foreign object, turn it off immediately and
check for damage.
•Do not put hands, feet or any other body part or clothing near the blades.
•The product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the product by a person responsible for their safety.
•Do not attempt to modify the product. Any such modification or misuse
could result in a hazardous condition leading to serious injury.
•If any parts are damaged or missing, do not operate until the parts are
replaced.
•Do not force the product. It will do a better job with less likelihood of a risk
of injury when you operate it at the rate for which it was designed.
•Make sure the power rating on the plug matches the outlet.
•Do not use any adaptor plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce the risk of electric
shock.
•Before use make sure that the pole chainsaw is correctly assembled, and
all parts are securely attached.
•Do not use if any parts are damaged, always consult a qualified repair
person.
•Keep children and pets well away from the working area.
•Only use in a well-lit area.
•Not suitable for commercial purposes.
5
Safety symbols and their meanings
Precautions required that involve your safety
To reduce the risk of injury, users must read and understand the
instruction manual before using this product.
Wear gloves when operating this equipment.
Wear ear and eye protection and a hard hat when operating.
Remove the plug from the mains immediately if the cable is damaged
or cut.
Do not expose the machine to rain or wet conditions.
Keep all bystanders (especially children and pets) at least 15m away
from the work area.
Switch off and remove it from the power source before adjusting,
cleaning and before leaving the product unattended for any period.
Do not operate on inclines greater than 15°
Beware of electric shock hazard.
Warning! Hot surfaces.
Wear closed, sold shoes with a good grip.
Beware of overhead power lines.
Sound level as indicated by LWA in dB.
6
Description of parts
1. Safety cover
2. Trigger
3. Handle
4. Power cord
5. Harness
6. Grip
7. Collet/shaft grip
8. Locking dials
9. Link collet/shaft grip
10. Angle adjust button
11. Power head
12. Chainsaw head
13. Oil cap
14. Guide bar screw
15. Guide bar
2
3
4
6
7
8
9
10
11
12
5
13
14
15
1
7
Assembly
Chain and guide bar
Please note: The cutting edges of the chain are sharp. Wear protective
gloves when handling.
1. Sprocket
2. Adjusting hole
3. Sprocket cover
4. Guide bar screw
5. Adjusting screw
6. Adjusting plate
7. Adjusting block
Lay the chain head on a flat surface and, using the hex key supplied, remove
the guide bar screw, washer and spring washer, turning anti-clockwise. Lift the
sprocket cover off.
Turn the adjusting screw anti-clockwise until the adjusting block is in the middle
of the adjusting plate. This will allow you to position the adjusting hole on the
guide bar, onto the adjusting block.
Position the guide bar onto the adjusting plate with the large slot onto the
protrusions. Position the rear of the guide bar between the adjusting plate and
the sprocket. Make sure that you insert the adjusting block into the adjusting
hold on the guide bar.
1
2
3
4
5
6
7
8
Place the chain around the drive sprocket, then along the top groove of the
guide bar and around the guide bar nose.
Please note: Make sure that the cutting edges of the chain are facing in the
right direction. Position the chain so that the cutting edges on top of the
guide bar face the guide bar nose.
Extension pole and harness
Loosen and remove the locking dial on the rear pole, then pull the extension
pole out about 30cm (1ft) and connect to the front pole. Ensure it is fully
slotted in and engaged; otherwise the power will not be connected.
Note: the protrusion on the extension pole must fit into the slot on the front
pole and be pushed in fully for the chainsaw to operate, it can only be
assembled one way. When connected, tighten both locking dials.
Large slot
Adjusting hole
IMPORTANT! If the two sections
are not connected correctly, there
will be intermittent or no power. If this
is so, check the connection is fully
engaged.
9
Adjusting the chain tension
Adjust the tension of the chain using the hex key supplied. Replace the
sprocket cover following the above steps, in reverse, tighten the guide bar
screw slightly.
Please note: Hold the chain guide bar with one hand and turn the adjusting
screw clockwise until there is only slight movement in the chain around one
eighth of an inch. Then fully tighten the guide bar screw.
Adjusting the angle
The angle of the power head can be set to three different working positions:
0°, 15° and 30°. Push the adjust button with one hand and turn the power
head around to suitable position. The adjust button will lock automatically.
Adding chain oil
Before using the chain saw it is necessary to add chain oil (supplied) and
after every 10 minutes of use, check the level and top up as required.
Remove the oil cap from the top of the main body. Fill with oil supplied and
replace the cap, ensuring it’s securely fastened.
Oil cap
10
Instructions for use
•Once you have read the instructions and assembled your pole
chainsaw, choose an area that you wish to work on.
•Plug the power cord into a suitable socket and switch the socket on.
•Put the harness over your shoulder and ensure it is comfortable. Hold
the main handle and depress the on/off switch. The pole chainsaw will
start to work.
•Practice on a small branch first and move the blade to the area slowly
until it begins to cut.
Additional safety guidance
Never stand directly under the
branch you are trimming.
Always position yourself out of the
path of falling debris.
Never stand on a ladder or other
type of unstable support while using
this product.
Always use both hands to operate
the pole chainsaw. Keep a firm,
steady grip on the product while
cutting but do not try to force the
product.
Do not use the pole chainsaw to
cut branches larger in diameter
than the length of the guide bar.
Keep other people away from
cutting end of the pole chainsaw
and at a safe distance from the
working area.
Do not use the pole chainsaw near
cable, electric power or telephone
cables.
Maintain a minimum clearance of
10 metres from all power lines.
Altri manuali Garden Gear Motosega
