Garden Treasures MD320 Manuale utente
Item # 59080
Fountain Pump
(Model # MD320)
Questions, Problems, Missing Parts?
Before returning to your retailer, call our customer department at
1-866-728-6187, 8 a.m. – 6 p.m. EST, Monday – Friday, or e-mail us at customerservice@srg-usa.com.
Please have your model number available.
Parts List No Tools Required for Assembly
Part # Description Quantity
1
2 Pump
Garden hose adapter 1
1
Warnings
•To reduce the risk of electrical shock, connectonly to a properly grounded, grounding type receptacle (GFCI).
•Do not exceed the voltage shown on the pump.
•Always disconnect pump from the power source before beginning any maintenance or work on the pump.
•Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if damage is found.
•Do not remove the grounding pin from the power cord plug.
Cautions
•Use a proper power source as indicated on the pump label.
•Keep the cord away from high temperatures orother heat sources.
•Avoid using the pump when water temperatures fall below 41° F.
•Do not use the pump in water exceeding 86° F.
•Do not pump heated liquids.
•Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
•Operate in freshwateronly.Avoid heavily chlorinated water and water with high pH levels.
•Do not lift the pump byits power cord.
Assembly Instructions
1. Remove the pump from the package and untiethe power cord.
2. If applicable, attach garden hose adapter, fountain head, diverter valve, filter, etc.
3. Place your pump in the desired position in your pond or fountain, ensuring that it is completely submerged in the water. If the
pump is to be used in a pond, raise the pump off the pond floor to ensure that it is above any dirt that will collect, as this will
adversely affect pump performance.
4. Plug the power cord into a properly grounded receptacle.
5. Use the garden hose adaptor for draining your pond by attaching the adapter to the pump outlet and a garden hose.
Care and Maintenance
•Keep water clean to prolong the life of the pump. Use of distilled water will reduce mineral deposits.
•Use a filter when possible. This pump is compatible with the following filter models: PFSP (#60023), MF500 (#60024) and
MF750 (#60026).
•Regular cleaning of the pump may be necessary depending upon the environment in which it is operated. Clean the pump
when it is visibly soiled or when a drop in performance is detected.
•Before cleaning, always disconnect the pump from the power source.
•Remove all parts fromthe pump and clean in warm, soapy water.
•Disassemble the pump housing and remove the impeller housing to expose the impeller assembly. Remove the impeller
assemblyby gentlypullingon theimpellerblades. Use asoft cloth orbrush toclean the impellerassembly and theinside ofthe
impeller housing.
Troubleshooting
If the pump fails to operate:
•Check to make sure thepower cord is plugged in and the pump is getting power.
•Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.
•Remove the inlet screen and/or pump cover, and impeller housing to expose the impeller. Turn the impeller to ensure that it is
not broken or jammed.
If the performance of the pump is not satisfactory or the pumpdoes not flow evenly:
•Check to make sure thepump is completely submerged inwater.
•Check to make sure theimpeller and the housing are clean.
Printed in China
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Garden Treasures Pompa dell'acqua
Manuali Pompa dell'acqua popolari di altre marche
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi
DUROMAX
DUROMAX XP WX Series Manuale utente
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manuale utente
Franklin Electric
Franklin Electric IPS Manuale utente
Xylem
Xylem e-1532 Series Manuale utente
Milton Roy
Milton Roy PRIMEROYAL Manuale utente