Garmin eTrex 30 Manuale utente
eTrex®
owner’s manual
for use with models 10, 20, 30
© 2011 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without
the written consent of Garmin. Garmin reserves the right to change or improve its products and to make
changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information
concerning the use of this product.
Garmin
®
, the Garmin logo, eTrex
®
, BlueChart
®
, and City Navigator
®
are trademarks of Garmin Ltd.
or its subsidiaries, registered in the USA and other countries. ANT
™
, ANT+
™
, BaseCamp
™
, chirp
™
,
HomePort
™
, and Thumb Stick
™
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may
not be used without the express permission of Garmin.
Windows
®
is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac
®
is a registered trademarks of Apple Computer, Inc. microSD
™
is a trademark of SD-3C, LLC. Other
trademarks and trade names are those of their respective owners.
eTrex Owner’s Manual 3
Table of Contents
Table of Contents
Getting Started ........................5
Device Overview............................5
Using the eTrex Keys ....................6
Battery Information ........................7
Turning the Device On or Off .........8
Satellite Signals .............................8
Registering Your Device ................8
Waypoints, Routes, and
Tracks ......................................9
Waypoints ......................................9
Using Sight ‘N Go ........................10
Where To? Menu ......................... 11
Routes .........................................12
Tracks ..........................................14
Navigation .............................16
Navigating to a Destination..........16
Map..............................................16
Compass .....................................17
Elevation Plot...............................19
Trip Computer ..............................20
Geocaches ............................21
Downloading Geocaches.............21
Filtering the Geocache List ..........21
Navigating to a Geocache ...........22
Logging the Attempt.....................22
chirp™ ..........................................23
Applications ..........................24
Sharing Data................................24
Setting a Proximity Alarm ............24
Calculating the Size of an Area ...25
Using the Calculator ....................25
Viewing the Calendar and
Almanacs ..................................25
Setting an Alarm ..........................26
Opening the Stopwatch ...............26
Satellite Page ..............................26
Customizing Your Device ....28
Customizing the Main Menu ........28
Customizing Specic Pages ........28
Proles.........................................29
System Settings...........................30
Display Settings ...........................30
4 eTrex Owner’s Manual
Table of Contents
Setting the Device Tones .............31
Map Settings................................31
Tracks Settings ............................32
Changing the Units of Measure ...33
Time Settings ...............................33
Position Format Settings .............33
Heading Settings .........................34
Altimeter Settings ........................34
Geocaching Settings ...................35
Routing Settings ..........................36
Marine Map Settings....................37
Fitness .........................................38
Resetting Data .............................38
Changing the Page Sequence.....39
Device Information ...............40
Adjusting the Screen ...................40
Updating the Software .................40
Viewing Device Information .........40
Specications ..............................41
About the Batteries ......................41
Caring for the Device ...................42
Data Management .......................43
Appendix ...............................46
Optional Accessories ...................46
Data Field Options .......................47
Troubleshooting ...........................52
Index ......................................54
eTrex Owner’s Manual 5
Getting Started
Getting Started
‹
WARNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information.
When using your device the rst time,
you should complete these tasks to set
up the device and get to know the basic
features.
1. Install the batteries (page 7).
2. Turn on the device (page 8).
3. Acquire satellites (page 8).
4. Register the device (page 8).
5. Mark a waypoint (page 9).
6. Create a route (page 12).
7. Record a track (page 14).
8. Navigate to a destination (page 16).
9. Calibrate the compass (page 17).
Device Overview
➊
➎
➍➌
➋
➊
Zoom keys
➋
Back key
➌
Thumb Stick™
➍
Menu key
➎
/Backlight key
6 eTrex Owner’s Manual
Getting Started
➏
➒
➑
➐
➏
Mini-USB port (under weather cap)
➐
Battery cover
➑
Battery cover locking ring
➒
Mounting spine
Using the eTrex Keys
• Move the Thumb Stick up, down,
left, and right to highlight menu
selections or to move around the
map.
• Press the center of the Thumb Stick
to select the highlighted item.
• Press back to move back one step
in the menu structure.
• Press menu to display a list of
commonly-used functions for the
current page. Press menu twice
to access the main menu from any
page.
• Press ▲ and ▼ to zoom in and out
on the map.
eTrex Owner’s Manual 7
Getting Started
Battery Information
‹
WARNING
The temperature rating for the device
(-4°F to 158°F, or -20 to 70°C) may
exceed the usable range of some
batteries. Alkaline batteries can rupture
at high temperatures.
notice
Alkaline batteries lose a signicant
amount of their capacity as temperature
decreases. Therefore, use lithium
batteries when operating the device in
below-freezing conditions.
Installing AA Batteries
The device operates on two AA
batteries. You can use alkaline, NiMH,
or lithium batteries. Use NiMH or
lithium batteries for best results.
1. Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2. Insert the batteries, observing
polarity.
3. Replace the battery cover, and turn
the D-ring clockwise.
4. Hold .
5. Select Setup > System > Battery
Type.
6. Select Alkaline, Lithium, or
Rechargeable NiMH.
8 eTrex Owner’s Manual
Getting Started
Turning the Device On or
Off
Hold .
Satellite Signals
After the device is turned on, it begins
acquiring satellite signals. The device
may need a clear view of the sky to
acquire satellite signals. When the
GPS bars on the backlight page
(page 40) are solid green, your device
has acquired satellite signals. The time
and date are set automatically based on
the GPS position.
For more information about GPS, go to
http://www.garmin.com/aboutGPS.
Registering Your Device
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a
photocopy, in a safe place.
eTrex Owner’s Manual 9
Waypoints, Routes, and Tracks
Waypoints, Routes,
and Tracks
Waypoints
Waypoints are locations you record and
store in the device.
Creating a Waypoint
You can save your current location as
a waypoint.
1. Select Mark Waypoint.
2. Select an option:
• To save the waypoint without
changes, select Done.
• To make changes to the
waypoint, select an item to edit,
and select Done.
Finding a Waypoint
1. Select Where To? > Waypoints.
2. Select a waypoint.
Editing a Waypoint
Before you can edit a waypoint, you
must create a waypoint.
1. Select Waypoint Manager.
2. Select a waypoint.
3. Select an item to edit.
4. Enter the new information.
5. Select Done.
Deleting a Waypoint
1. Select Waypoint Manager.
2. Select a waypoint.
3. Select menu > Delete > Yes.
10 eTrex Owner’s Manual
Waypoints, Routes, and Tracks
Increasing the Accuracy of a
Waypoint Location
Waypoint averaging allows you to
increase the accuracy of a waypoint
location by collecting multiple samples
of the waypoint location.
1. Select Waypoint Averaging.
2. Select a waypoint.
3. Move to the location.
4. Select Start.
5. When the Sample Condence status
bar reaches 100%, select Save.
For best results, collect four to
eight samples for the waypoint,
waiting at least 90 minutes between
samples.
Using Sight ‘N Go
Sight ‘N Go is available on the
eTrex 30.
You can point the device at an object in
the distance, lock in the direction, and
then navigate to the object.
1. Select Sight ‘N Go.
2. Point the device at an object or in
the direction of a location.
3. Select Lock Direction > Project
Waypoint.
4. Select a unit of measure.
5. Enter the distance to the object, and
select Done > Save.
Altri manuali per eTrex 30
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Garmin GPS
Garmin
Garmin APOLLO GX 55 Manuale utente
Garmin
Garmin Honda Compact Navigation System Manuale utente
Garmin
Garmin GMA 340 Manuale
Garmin
Garmin Oregon 200 Manuale di istruzioni
Garmin
Garmin Drivesmart 55 Manuale utente
Garmin
Garmin eTrex Mariner Manuale utente
Garmin
Garmin GPSMAP 64 Manuale utente
Garmin
Garmin StreetPilot 7200 Guida di riferimento
Garmin
Garmin NUVI Manuale utente
Garmin
Garmin Nuvi 205 Series Manuale di istruzioni
Garmin
Garmin Edge 510 Manuale utente
Garmin
Garmin DĒZL OTR810 Manuale di istruzioni
Garmin
Garmin Zumo 660 Manuale utente
Garmin
Garmin Vivofit 2 Manuale utente
Garmin
Garmin 010-11018-00 - Mobile PC - GPS Software Guida di riferimento
Garmin
Garmin eTrex H - Hiking GPS Receiver Guida di riferimento
Garmin
Garmin Alpha 300 Manuale utente
Garmin
Garmin aera 500 Guida alla configurazione
Garmin
Garmin Echomap Plus 40 series Manuale utente
Garmin
Garmin Zumo 500 Istruzioni per il montaggio
