Garmin nuvi 2465 Manuale di istruzioni
nüvi
®
2465
quick start manual
nüvi 2465 Quick Start Manual 1
Getting Started
WARNING
Refer to the Important Safety and
Product Information guide available
on www.garmin.com for product
warnings and other important
information.
When using your device for the rst
time, complete the following tasks.
1. Mount the device (page 1).
2. Connect the device to vehicle
power (page 2).
3. Register the device (page 3).
4. Check for updates.
• Software and map updates
(page page 3)
Mounting Your Device
NOTICE
Before mounting the device, please
refer to the Important Safety and
Product Information guide for
information about laws pertaining to
windshield mounting.
1. Remove the clear plastic from the
suction cup.
2. Clean and dry your windshield
and the suction cup with a lint-free
cloth.
3. Press the suction cup to the
windshield.
4. While pressing, ip the lever back
toward the windshield.
5. Snap the mount
➊
onto the
suction cup arm
➋
.
2 nüvi 2465 Quick Start Manual
➊➋
6. Fit the bottom of your device into
the mount.
7. Tilt your device back until it
snaps into place.
Connecting the Device
to Vehicle Power
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to
extreme heat, remove the device from
the vehicle when exiting or store it
out of direct sunlight.
Charge your device before using it on
battery power.
1. Plug the vehicle power cable into
the mini-USB connector
➊
on the
mount.
➊
2. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
nüvi 2465 Quick Start Manual 3
3. If you are using a trafc receiver
in Europe, connect the external
antenna to the trafc receiver and
secure it to the windshield using
the suction cups.
After the device has been connected
to vehicle power, the following
occurs.
• The device turns on.
• The device acquires satellite
signals. When at least one of
the bars is green, your
device has acquired satellite
signals.
NOTE: The device may need
a clear view of the sky to
acquire satellite signals.
• The device charges as you
drive. in the status bar
indicates the status of the
internal battery.
Registering the Device
Go to www.my.garmin.com for
registration
Updating the Software and
Maps
Go to www.garmin.com.sg for
software and map updates
nüMaps Guarantee™
Your device is eligible for one
free map update within 60 days of
acquiring satellites while driving with
your nüvi. You are not eligible for
the free map update if you register
by phone or wait longer than 60
days after the rst time you acquire
satellites while driving with your
nüvi. For more information, go to
www.garmin.com/numaps.
4 nüvi 2465 Quick Start Manual
Device Overview
➊
➋
➊
Power key
➋
microSD
™
card slot
Using the Power Key
Press and quickly release the
Power key to view additional
options.
• Touch and drag the scroll bar
to adjust screen brightness.
• Touch Lock to prevent
accidental screen touches (nüvi
2360 only).
• Touch Power Off to turn off
your device.
• Press and hold the Power key
to reset the device.
• Press and quickly release the
Power key to exit the menu.
About Points of Interest
The detailed maps loaded in your
device contain points of interest,
such as restaurants, hotels, and auto
services.
Finding a Point of Interest by
Category
1. From the Main menu, touch
Where To? > Points of Interest.
2. Select a category.
3. If necessary, select a subcategory.
4. Select a destination.
5. Touch Go!.
nüvi 2465 Quick Start Manual 5
You can touch > Save on
this page to save the location to
a Favorites folder on the device.
Use the Favorites folder to save
the location of your workplace,
home, and other common
destinations.
6. If necessary, select an option.
• Touch Drive to calculate a
route you will navigate by
driving.
• Touch Walk to calculate a
route you will navigate by
walking.
• Touch Public Transit to
calculate a route that combines
public transit and walking.
NOTE: You must have
cityXplorer™maps loaded to
navigate using public transit.
Go to www.garmin.com to
purchase cityXplorer maps.
Using the Main Menu
➊
➋ ➌
➍ ➐ ➑➎ ➏
• Touch
➊
to select a transportation
mode.
• Touch
➋
to nd a destination.
• Touch
➌
to view the map.
• Touch
➍
to stop a route.
• Touch
➎
to detour a route.
• Touch
➏
to start Voice Command
• Touch
➐
to adjust the volume.
• Touch
➑
to open the menu of
tools and settings.
6 nüvi 2465 Quick Start Manual
Your Route on the Map
NOTICE
The speed limit icon feature is for
information only and does not replace
the driver’s responsibility to abide
by all posted speed limit signs and to
use safe driving judgment at all times.
Garmin will not be responsible for
any trafc nes or citations that you
may receive for failing to follow all
applicable trafc laws and signs.
➊ ➋
➌
➍ ➎
➏➐
➑➒➓
Your route is marked with a magenta
line on the map. If you depart from
the original route, your device
recalculates the route. A speed limit
icon could appear as you travel on
major roadways.
• Touch
➊
to view the next turn. If
a view of the junctions exists, the
junction view appears.
• Touch
➋
to view the turn list.
• Touch
➌
to zoom in and out.
• Touch
➍
to return to the Main
menu.
Touch and hold from any screen to
return to the Main menu.
• Touch
➎
to change the data eld.
• Touch
➏
to view the Where Am
I? page.
• Touch and drag
➐
to view a
different area of the map.
• Touch
➑
to view the trip
computer.
• Touch
➒
to change the speed limit
if the speed limit icon shown on
the map is incorrect.
•
➓
represents “lane info”, leading
you the exact direction.
nüvi 2465 Quick Start Manual 7
Using myTrends
As you drive with the device on,
myTrends™gathers information that
allows the device to predict when
you are traveling to a common
destination, like your workplace or
home. When myTrends is activated,
the destination and estimated time of
travel will appear in the navigation
bar on the map.
myTrends only works for locations
that are saved as Favorites (page 5).
When myTrends information
appears in the navigation bar,
touch the navigation bar to view
route information.
Avoiding Road Features
1. Find the main menu, touch Tools
> Settings > Navigation > car >
nüRoute > Avoidances.
2. Select the road features to avoid
on your route.
3. Touch Save.
About the Transportation
Modes
Automobile mode
Pedestrian mode
Routes are calculated differently
based on your transportation mode.
For example, in Automobile mode,
estimated time of arrival is calculated
using the speed limit of the roads on
the route. Pedestrian mode calculates
time of arrival based on walking
speed.
Changing Your Transportation
Mode
1. From the Main menu, touch the
transportation mode icon.
2. Select a mode.
3. Touch Save.
8 nüvi 2465 Quick Start Manual
Using the On-Screen
Keyboard & Handwriting
Pad
When an on-screen keyboard appears,
touch a letter or number to enter it.
Touch to add a space. Touch ◄
and ► to move the cursor. Touch
to delete a character. Touch and hold
to erase the entire entry. Touch
Mode to select the keyboard language
mode. nüvi 2465 supports keyboards
in English, Japanese, Korean,
simplied Chinese, and traditional
Chinese.
You can also use the on-screen
handwriting pad to enter characters
in English, simplied Chinese, and
traditional Chinese.
About Trafc
NOTICE
Garmin is not responsible for the
accuracy or timeliness of the trafc
information.
The FM Trafc Message Channel
(TMC) subscription is automatically
enabled and does not require an
addition subscription purchase to
activate. The FM TMC trafc receiver
is available in retail shops. Contact
your local distributor for more
information.
TMC is only available in Singapore
with NAVTEQ Maps
nüvi 2465 Quick Start Manual 9
Manually Avoiding Trafc on
Your Route
1. From the map, touch .
2. Touch Trafc On Route.
3. If necessary, touch the arrows to
view other trafc delays on your
route.
4. Touch Avoid.
Viewing the Trafc Map
The trafc map shows color-coded
trafc ow and delays on nearby
roads.
1. From the map, touch .
2. Touch Trafc Map to view the
trafc incidents on a map.
About Voice Command
NOTICE
Voice Command supports British
English only not supports Bahasa
Malay. Some functions may be
invalid.
The Voice Command feature allows
you to use your device by speaking
the words you see on the screen or
by speaking certain commands. The
Voice Command menu provides a list
of available commands to use.
Activating Voice Command
1. Speak Voice Command.
The voice command menu
appears.
2. Press ASR icon. The voice
command menu appears.
Indice
Altri manuali Garmin GPS
Garmin
Garmin DAKOTA 10 Manuale di istruzioni
Garmin
Garmin zumo 665LM Manuale utente
Garmin
Garmin 4XXW Series Istruzioni per l'installazione e il funzionamento
Garmin
Garmin iQUE 3600 Guida utente
Garmin
Garmin nuvi 42 series Manuale di istruzioni
Garmin
Garmin GTN Xi Series Manuale utente
Garmin
Garmin GPS 60 - Hiking GPS Receiver Istruzioni per l'installazione e il funzionamento
Garmin
Garmin Cessna Caravan G1000 Manuale utente
Garmin
Garmin AERA 660 Manuale utente
Garmin
Garmin GPS 165 Manuale utente
Garmin
Garmin GPS 175 Manuale
Garmin
Garmin Oregon 750 Manuale di istruzioni
Garmin
Garmin Drivesmart 55 Manuale utente
Garmin
Garmin GPS 92 Manuale utente
Garmin
Garmin iQue M4 - Win Mobile Manuale utente
Garmin
Garmin GNS 430 Manuale utente
Garmin
Garmin GMA 35 Manuale utente
Garmin
Garmin GPSMAP 66s Manuale utente
Garmin
Garmin GPSMAP 3205 - Marine GPS Receiver Guida di riferimento
Garmin
Garmin GPSMAP 192C Manuale utente
