G-Shield Instruction Manual
Version 15
5 List of Figures
Figure . G-Shield Fire HMI shown in optional enclosure with two Sensor Platforms and a G-Pod.
Figure . Keywords and symbols used in this manual.
Figure . The G-Shield Fire HMI.
Figure . The G-Shield Fire HMI fitted to its optional enclosure.
Figure . Sensor Platform with G-Pod fitted.
Figure . The G-Pod has electrical connections and an alignment key.
Figure . G-Shield HMI dashboard cutout.
Figure . G-Shield Fire HMI enclosure rear view showing VESA mounts.
Figure . Sensor platform exploded view.
Figure . Splash Guard.
Figure . G-Pod key and Sensor Platform keyway.
Figure . Bushing Nut with Grub screw.
Figure . HMI electrical connections.
Figure . Input power connection details.
Figure . Sensor Platform connection details.
Figure . SW set to the ON position on Sensor Platform .
Figure . Relay connection details.
Figure . Relay connection details.
Figure . G-Shield Fire system wiring diagram.
Figure . HMI user interface icons.
Figure . HMI home screen user interface.
Figure . HMI Power on.
Figure . HMI Power on after power interruption.
Figure . Alarm levels.
Figure . Home screen - no gas detected.
Figure . HCN Warning Alarm On.
Figure . CO Warning Alarm On.
Figure . HCN Danger Alarm On.
Figure . Push to mute Danger Alarm.
Figure . CO Danger Alarm On
Figure . Co Danger Alarm muted.
Figure . Calibration equipment.
Figure . Calibration reminder.
Figure . Calibrate now.
Figure . Response test gas requirements and pass criteria.
Figure . HCN response test too high.
Figure . HCN response test too low.
Figure . CO response test too high.
Figure . CO response test too low.
Figure . Sensor calibration due.
Figure . Error messages.
Figure . Sensor communication error.
Figure . G-Pod dimensions.
Figure . Sensor Platform dimensions.
Figure . HMI dimensions.
Figure . HMI enclosure dimensions.
Figure . List of spare parts.
Figure . HMI enclosure assembly.
Figure . Sensor Platform assembly.
Figure . Dummy Plug fitted to Sensor Platform.
