Basic Instructions for video and photo operation
Powering on and off the device:
To turn on the DVR press the power key once, the red indication lamp will be
light up if it is connected to a power source. To turn it off, hold down the
power button and the device will turn off.
WARNING: The device will automatically turn off once the battery hits
critically low levels.
Video Mode
Press the Mode button to switch to video mode if not already. To start
recording in video mode press the OK button to start the recording. You know
it is recording by the rec circle indicator on the top left corner of the LCD.
Photo Mode
Press the Mode button to switch to photo mode. There is a camera icon the top
left corner of the LCD to signify you are on photo mode. To take a photo, press
either the power button or the OK button. The screen will flash and make a camera
sound when a picture is taken.
Video/Photo Playback
Press the mode button until you get to a screen with two options, ‘SD Card’ and
‘Nand Flash’. These two options represent storage locations. SD card represents
files stored on an inserted SD card. Nand Flash represents the internal memory of
the DVR. (NOTE: If you have an SD card inserted, then the files are most likely
stored on there. If you don’t have SD card inserted then most likely any recorded
footage is saved on Nand Flash) To select an option, use the Up/Down buttons to
select an option press the OK button to confirm. Once in selected storage location,
use the Up/Down keys to select a file and press OK to play it. Press the Mode
button again to view the videos/pictures in thumbnail format. Pressing the Menu
button will give you the option to either delete or copy the file. Press the Mode
button again to exit playback mode.
