GBC Fusion 5000L Manuale di istruzioni
FUSION
™5000L
A3 LAMINATORS
start here
démarrez ici
starten sie hier
iniziare qui
GB instruction manual 4
F manuel d’utilisation 10
D bedienungsanleitung 16
I manuale d’istruzioni 22
FUSION
™5000L
A3 LAMINATORS
GB
4register this product online at www.accobrands.com
professional finish… automatically!
Welcome to the new GBC 5000L laminator which allows
lamination to be completed quickly and simply with GBC
quality lamination output. Perfect for novice users choosing
automatic self setting to expert users with multiple pouch
thicknesses and document sizes.
For best lamination results and performance, use only GBC
branded pouches.
Please take a little time to study these instructions to ensure
you get the best results out of your machine.
Electrical shock hazard.
Do not open. No user
serviceable parts inside.
service personnel.
WARNING
m
c
The following warning is found on the
product in several languages.
This safety message means that you
could be seriously hurt or killed if you
open the product and expose yourself
to hazardous voltage.
safety instructions
Your safety as well as the safety of others is important to ACCO® Brands. In this
instruction manual and on the product are important safety messages. Read these
messages carefully.
m
The safety alert symbol precedes each safety message in this instruction manual.
This symbol indicates a potential personal safety hazard that could hurt you or others,
as well as cause product damage or property damage.
m
Electrical
220-240V AC / 50Hz-60Hz /
6.5A / 1520W
Machine Dimensions 570x193x132mm
Machine Weight 4.6kg
Maximum Pouch Width A4: 241mm
A3: 303mm
Maximum Pouch
Thickness
2x250micron (total 500)
Maximum Thru-put
Thickness
1.0mm
Warm-Up Time Approximately 1 minute
Speed Variable (max.: 1000mm/min.)
technical specifications
service
Do not attempt to service or repair the pouch laminator yourself. Unplug the unit and contact an
authorised GBC service representative for any required repairs.
GB
FUSION™5000L A3 LAMINATORS 5
points to note
• Use this unit only for its intended use of laminating documents
• Only use 75mic, 125mic, 175mic or 250mic pouches with this laminator
• Do not laminate an empty pouch
• The unit must be connect to a supply voltage corresponding to the electrical rating shown
on the unit
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• Ensure the machine is clear of pouches prior to starting the next pouch
• Clear the lamination rollers on a regular basis
• Maximum A3 document pouch 426x303mm on GBC Fusion 5000L A3 Laminator
• Active anti jam feature may not detect issue on smaller items
• Failure to comply will result in damage and invalidate guarantee
m
m
m
m
GB
6register this product online at www.accobrands.com
getting ready to laminate
Easy Set Up
1 Remove the plastic exit tray from the box and place into the two holes on the back of the
laminator and extend to use. Ensure that there is sucient space behind the laminator for the
item to be removed.
2 Take the electrical plug and place in an appropriate power source, which is near the table you
intend to use.
3 The laminator will briey ash the GBC logo on the control panel and will make an audible beep.
Interactive User Display
4 To use the laminator gently tap the ‘power on’ button. A sequence of lights will cross the control
panel.
NOTE: Your new laminator may emit
a slight odour during the initial
operation. Its is normal and will
diminish after a few hours of
operation.
5 If 75mic is not the pouch thickness you want to select, using the arrows scroll until the required
pouch thickness setting is shown and press “Enter”.
Intelligent Pouch Select
6 Using the ‘Auto’ setting allows the user to use any thickness of pouch and the laminator
will automatically measure the thickness of the pouch and document and self set to the
appropriate speed.
NOTE: During warm up a circle will be
formed on the control panel and a
red indicator will ash in the centre
of the circle until ready ( ).
When ready a series of three beeps
are heard and the ( ) will show
on the display. The machine will not
take any pouch during warm up.
loading the pouch
1 Take your item to be laminated and place into the laminating pouch. Ensuring it is rmly placed
along the sealed edge of the pouch. This is to help ensure that you get optimal quality output.
Before laminating important or unique documents, always run a test pouch through
the laminator using a similar type document.
SEALED EDGE
A3, A4, A5, etc. Irregular shaped item
SEALED EDGE
NOTE: Do not cut pouches prior to
lamination.
GB
FUSION™5000L A3 LAMINATORS 7
GB
8register this product online at www.accobrands.com
laminating
NOTE:
On Power O there will continue to be a noise emitted from the unit for approximately
30 seconds this is for cooling purposes
2 Feed the sealed edge of the pouch, into the laminator between the guides. The laminator will
grip the pouch and guide it through to the exit tray.
NOTE: Do not force guides
against pouch
3Do not force guides tightly against pouch. Move guides to an appropriate setting to allow pouch
to be fed in without touching guides.
4When you are nished laminating tap the ‘power’ button and if required remove the tray, unplug
and store accordingly.
Upon exiting remove your
laminated item immediately
and lay on a at surface to
ensure optimal quality.
1 On the front of the laminator there are adjustable guides to help you feed your pouch accurately.
Move the guides to appropriate line which matches your pouch/ item to be laminated.
Accurate
Feed Guides
cleaning
mWARNING: UNPLUG THIS PRODUCT BEFORE CLEANING THE EXTERIOR.
WIPE EXTERIOR ONLY WITH A DAMP CLOTH AND DO NOT USE
DETERGENTS OR SOLVENTS.
Regularly feed a cleaning card or sheet of paper through the laminator to clean the
rollers. Cleaning sheet order code: EK50000.
guarantee
Operation of this machine is guaranteed for two years from date of purchase, subject to normal
use. Within the guarantee period, ACCO Brands Europe will at its own discretion either repair
or replace the defective machine free of charge. Defects due to misuse or use for inappropriate
purposes are not covered under the guarantee. Proof of date of purchase will be required.
Repairs or alterations made by persons not authorised by ACCO Brands Europe will invalidate
the guarantee. It is our aim to ensure that our products perform to the specications stated.
This guarantee does not aect the legal rights which consumers have under applicable national
legislation governing the sale of goods.
additional features
For added safety and environmental reasons the laminator will automatically go into
sleep mode after 30 minutes of inactivity. You will hear a single beep before this occurs
Intelligent Status Alert
If pouch misfeeds or jam starts to occur a series of beeps will be heard - and the laminator will
automatically reverse the document out ( ).
NOTE: Never reuse a misfed or jammed
pouch
Intelligent Pouch Reverse
To recover a partially fed pouch press and hold the “Reverse” ( ) button and the pouch will be
quickly reversed out of the laminator. You will hear a series of single beeps until Reverse button
( ) is released.
NOTE: Do not put partially laminated
items back into the laminator.
GB
FUSION™5000L A3 LAMINATORS 9
F
plastification professionnelle…
…automatiquement !
Merci d’avoir choisi la nouvelle plastieuse GBC Fusion
5000L au fonctionnement simple et rapide, qui ore la qualité
de plastication supérieure associée à la marque GBC.
Idéale tant pour les utilisateurs novices grâce aux réglages
automatiques que pour les utilisateurs expérimentés qui
peuvent choisir entre de nombreux formats et épaisseurs.
Pour optimiser la performance et les résultats de
plastication, utilisez uniquement les pochettes de
plastication GBC.
Veuillez consacrer quelques instants à la lecture de ces
instructions pour tirer le maximum de votre appareil.
10 enregistrez ce produit en ligne à www.accobrands.com
Risque de choc électrique. Ne
pas ouvrir. Aucune des pièces se
trouvant à l’intérieur ne peut être
réparée par l’utilisateur. En cas de
panne, s’adresser à du personnel
AVERTISSEMENT
m
c
L’avertissement suivant gure sur le
produit dans plusieurs langues.
Ce message d’avertissement signie que
vous risquez de vous blesser gravement
ou de vous tuer si vous ouvrez le produit et
vous exposez à une tension dangereuse.
consignes de sécurité
ACCO® Brands Europe se soucie de votre sécurité ainsi que de celle d’autrui. Des
messages de sécurité importants sont donnés dans ce manuel d’instructions et sur le
produit. Veuillez les lire attentivement.
m
Ce symbole d’avertissement précède chaque message de sécurité donné dans ce
manuel.
Il indique un danger potentiel susceptible de provoquer des blessures personnelles
ainsi que des dommages au produit ou à d’autres biens matériels.
m
Altri manuali per Fusion 5000L
2
Indice
Lingue:
Altri manuali GBC Plastificatrice
GBC
GBC 4500 Pro series Manuale utente
GBC
GBC Fusion Plus 6000 L Manuale utente
GBC
GBC FUSION 1000L A4 Manuale di istruzioni
GBC
GBC HeatSeal H210 Manuale utente
GBC
GBC HEATSEAL H220 Manuale utente
GBC
GBC Fusion 5000L Manuale di istruzioni
GBC
GBC H435 Manuale utente
GBC
GBC ORCA-I Manuale utente
GBC
GBC HEATSEAL H800 PRO-R Manuale utente
GBC
GBC Inspire+ Manuale utente
GBC
GBC HeatSeal H520 Manuale utente
GBC
GBC HeatSeal H215 HighSpeed Manuale utente
GBC
GBC HeatSeal H535 Turbo Manuale utente
GBC
GBC HeatSeal H212 Manuale utente
GBC
GBC 6250 Manuale utente
GBC
GBC FUSION 3000L Manuale utente
GBC
GBC Discovery 50 Manuale utente
GBC
GBC FUSION 3100L Manuale di istruzioni
GBC
GBC Arctic Titan 165 Manuale utente
GBC
GBC Falcon 60+ Manuale utente
