GE Profile DPGT650E Manuale utente
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 1
gGE imagination at work
GE Profile HE Dryer
DPGT650E/G
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 2
gGE imagination at work
Control Lock
To lock and unlock control
•Press Dry level and Temp for 3 seconds
•Replacement control may be shipped in locked mode
cl
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 3
gGE imagination at work
Service Mode
•To Enter Service Mode:
•In idle state (No display on SSD)
•Press and hold Less Time + Wrinkle Care then
press Power button to enter service mode
•If control does not display “t1”, the press and
hold sequence was not executed correctly.
•Press POWER to clear display, then re-enter
Service Mode.
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 4
gGE imagination at work
To Enter Service Mode
•Press and Hold Less Time and Wrinkle Care first
•Next press Power to enter Service mode
•Display will show t1
t1
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 5
gGE imagination at work
•Press the Cycles Button to Navigate from Test to Test
(This also exits an existing Test)
•Press the Start Button to enter/enable a Test and to
navigate from subtest to subtest
Service Mode
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 6
gGE imagination at work
Service Mode
•T1 – LED Check
•T2 – Software Revision
•T3 – Motor Test
•T4 – Door Switch Test
•T5 – Humidity Sensor Test
•T6 – Heater 1 and Outlet Thermistor Test
•T7 – Heater 1 and Heater 2 Test
•T8 – Error Codes
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 7
gGE imagination at work
•tE – Thermistor Outlet Error
•dE – Door Switch Error
•EE – EEPROM Error
Error Codes
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 8
gGE imagination at work
Exit Service Mode
•To Exit Service Mode:
•Press the Power Button.
•If no key is pressed for 15 minutes, the
control will automatically exit Service
Mode and enter the Idle State.
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 9
gGE imagination at work
T1 Test
•Test 1 – LED Component Check
•The display will initially show “t1”.
•Once the start button is pressed, the
Display shall initially toggle between “t1”
and “H3”. All LED’s turn ON. This cycle will
continue until the Start button is pressed
again. All LED’s turn off.
GE Profile HE Dryer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company 10
gGE imagination at work
T2 Test
•Test 2 – Program Revision
•The display will initially show “t2”.
•Once the start button is pushed, the Display
shall initially toggle between the product type
(“EL” or “gA”) and the current revision of the
software on unit. (Example: “EL”, then “01”)
Also, the button operation can be checked while
in this Test (Press different button in Test;
control will turn on corresponding LED). The
display shall show this until the Start button is
pressed.
Questo manuale è adatto per i seguenti modelli
1
Indice
