GE SD200SA Manuale utente
Model SD200SA
Description Generator Interlock Kit on BR 100 amp panel
Main Breaker 200 Amp Horizontal throw 4 Handle Main Breaker
Generator Breaker Below Main
WARNING
Only qualified personnel should be working on the panel box
An amateur should NEVER open the panel box
Please follow all rules and regulations of the National Electric Code
Step 1: Disassemble the interlock. Place the bottom plate (holes only) at edge of main breaker and this will line up with the bottom
edge of the generator breaker and mark holes as in picture below.
Step 2: Turn off the main breaker and remove the panel cover.
Step 3: Drill holes as marked on panel cover with supplied 3/16 drill bit and remove all burs from drilling cover.
Step 4: Insert screws from rear of cover, install bottom plate, and install top plate (slotted) install thread lock to screws and install
retaining nuts. Ensure proper movement.
Step 5: Install 2 pole Generator breaker below main breaker and place Generator Warning Sticker on Generator breaker.
Step 6: Combine the zip ties to make a loop and install zip ties around top set of breakers in panel as shown in picture below. Pull on
ends to make tight around breakers. Trim zip ties as needed and install Warning label next to release tab on zip tie at
generator breaker.
Step 7: Re-Install panel cover, Verify proper operation of interlock. Main breaker ON, generator breaker OFF and generator breaker
CAN NOT be turned on. Generator breaker ON, main breaker OFF and main breaker CAN NOT be turned on.
Main On Generator On
Place Generator start-up procedure label on panel box, Place CAUTION label on panel box and electric meter pan.
The MAIN and the GENERATOR breakers should NEVER be able to be turned on at the same time. If panel cover is removed the
Generator breaker is NEVER to be turned on. If for any reason the interlock does not function properly, DO NOT USE and contact us
immediately at sales@GenInterlock.com for support and instructions.
Thank You for your support,
GenInterlock Team
DISCLAIMER: GenInterlock.com is NOT responsible for misuse or improper
installation. All electrical equipment should be installed and maintained by
qualified personnel. Any consequences arising from improper use is the
responsibility of the user.
GenInterlock.com
732-339-4191
Indice
Altri manuali GE Interruttore automatico
GE
GE MicroVersa Trip Plus Manuale utente
GE
GE AM-4.16-250-9 Manuale utente
GE
GE AKR Manuale utente
GE
GE WavePro 3200 A Manuale utente
GE
GE Power Break II SPUV012DC Manuale utente
GE
GE MicroVersaTrip Plus Manuale utente
GE
GE AM-13.8-500-5C Manuale utente
GE
GE EntelliGuard AKR30S-800A Manuale utente
GE
GE AK-1-15 Series Manuale utente
GE
GE M-Pact Plus Manuale utente
GE
GE CB Watch 3 Manuale utente
GE
GE EntelliGuard G Guida utente
GE
GE AK-1-15 Series Manuale utente
GE
GE AM-13.8-500-7 Manuale utente
GE
GE AK-2-50 Manuale utente
GE
GE Power Break II Manuale utente
GE
GE AKR-3-50 Manuale utente
GE
GE GEK-7345 Manuale utente
GE
GE PowerVac 5kV VL Manuale utente
GE
GE AK-4-75 Manuale utente
