GE 45236 Manuale utente

Thanks for your purchasing of the 45236 Wireless Color Surveillance System. The 45236 kit is a

combined wireless color camera & video monitor/receiver. An ideal combination for watching the

baby, monitoring the porch, pets, yard or the pool. It is also suited to many small business

applications.

Features///

*900MHz wireless technology

*2.5-inch LCD for good picture display

*Plug and play installation

*Sound trigger function

*Supports up to 2 cameras

*Monitor can work with 3 modes: Scan, Auto & Manual

*Adjustable cycle time between cameras inAuto mode

*Camera can be wall or table mounting and the monitor can be tabletop mounting

*The LCD Brightness, Color, Contrast, Alarm volume & Audio volume are all

adjustable

System Contents///

Identify all parts before proceeding with installation.

Things to Consider Before Installation///

For best performance, follow these simple guidelines:

*The camera should be aimed accordingly to optimize viewing area.

*For best transmission, avoid installations where there are thick walls or major

obstructions between the camera & LCD monitor.

Installing the Camera(Transmitter)///

1.Unpack the Camera.

2.Decide whether the Camera will be wall-mounted or sit on a desk/tabletop. If wall

mounting, use drilling template on the back cover of these instructions. If using the

tabletop base, attach the camera to the stand as shown. The Camera can be adjusted

for either mounting scenario by rotating the Camera head to the required position.

3.To use the camera power adapter, connect power jack to the rear of the tabletop base.

Make sure the Camera is within reach of an AC power outlet.

4.Select the camera operating channel on the slide switch by moving slide switches to

1, 2channels’position. Switch is preset to channel 1.

5. The Camera (Transmitter) installation is now complete.

Installing the LCD Monitor///

Main Operation

1.Plug AC power supplier of the LCD monitor into the power jack in the rear of the

LCD monitor base.

2.Turn on the LCD monitor by pressing the top POWER button.

3.The LCD monitor can be set on the tabletop.

Optimizing the Wireless Camera System///

The 900MHz signals pass easily through your home's interior walls, but the signal

may be reflected by power wires or plumbing inside the wall.

Multi-Camera Operation///

The Wireless Surveillance System is designed to work with up to two cameras.

Additional cameras and rechargeable lithium battery packs for camera are sold

separately.

Important

When using more than one camera, make sure each camera is assigned to a specific

channel by adjusting the corresponding slide switch.

Accordingly the DIP switch located on the back of the LCD monitor should be

adjusted to reflect the channel in use.

The sensitivity of sound trigger can be adjusted by turning the knob “sensitivity adjust

tuner.

Operating Modes///

The wireless system can be set to operate in one of three modes: Scan, Auto or

Manual. The desired operating mode can be selected using the buttons on the front

panel of the LCD monitor.

Scan

Pressing the Scan button places the system in Scan mode. The LCD monitor screen

blanks into a standby mode while the system continuously scans the active cameras. If

a camera detects motion, the LCD monitor displays the camera picture and the beeper

will sound. Several minutes after the last detection, the screen returns to standby

mode while the LCD monitor resumes scanning. Pressing the Manual or Auto button

will wake up the LCD.

Auto

Pressing the Auto button places the system in Auto mode. In this mode, the system

automatically circulate through all active cameras. When a camera detects sound is

too high(you can set the compared sound by the sensitivity knob), the LCD monitor

will display the picture from the camera for a few seconds, and the beeper will sound.

To avoid searching channels that do not have cameras/transmitters assigned to them,

set the DIP switches(inside the battery compartment) for those corresponding

channels to the off position. The dwell time(time taken to switch between cameras) is

preset to 4 seconds and can be adjusted between 2 - 30 seconds. To adjust the dwell

time, press both the Auto and Manual buttons simultaneously. Each flash of the LED

in-creases the dwell time by one second.

Manual

To select a specific camera to LCD monitor, press the Manual button. The LCD

monitor will switch to a different camera each time the Manual button is pressed.

When the camera detects loud sound, the beeper will sound. To avoid searching

channels that do not have cameras assigned to them, set the DIP switches (inside the

battery compartment) for those corresponding channels to the Off position.

Monitor Functions///

Power

Press to turn the monitor on/off.

Alarm Volume

The Alarm Volume of the LCD monitor can be adjusted by tuning the Alarm volume

tuner on the top of the LCD monitor.

Volume

You may adjust the Sound Level by pressing “+” or “-” on the Volume button. This

operation is before pressing the “Menu” button. If you have pressed the “Menu”

button, please consult the bellow instructions.

By pressing the Menu button, you can adjust the brightness, color and contrast

1. Pressing the “menu” button once the first LED will be lighted and become blue,

and then you can adjust the brightness by pressing “+” or “-” on the

Volume/Adjust Button.

2. Pressing the “menu” button twice the middle LED will be lighted and become

blue, and then you can adjust the color by pressing “+” or “-” on the

Volume/Adjust Button.

3. Pressing the “menu” button three times the third LED will be lighted and become

blue, and then you can adjust the contrast by pressing “+” or “-” on the

Volume/Adjust Button.

4. Pressing the “menu” button four times, the blue lighted LED will be went out,

now you can adjust the volume by pressing the “+” or “-” on the Volume/Adjust

Button.If not any operating within 30 seconds it will back to volume adjust mode

automatically.

Trouble Shooting///

If you are having trouble operating this product, please consult the guide below:

SYSTOM REMEDIES

NoCamerapicture 1.Checkallconnectors.Makesurecamera(s)

& monitor are switched ON.

2. Ensure camera(s) & monitor are set to

correct channel(s).

3. Make sure camera(s) is within range of

monitor (receiver).

Blank Monitor 1. Make sure monitor is switched ON.

2. If using AC adaptor, make sure it is

plugged in.

3.Makesurerechargeablebatteryischarged.

Interference on Camera picture 1. Make sure each camera (transmitter) is

within range, and that no large obstructions

are blocking the signal.

2.Tryrepositioningthecamera,monitoror

both to improve the reception quality.

3.Repositionothernearbyequipment

transmitting on the 900MHz frequency.

Audio Problems 1.Ensure the volume is turned up sufficiently

on the monitor

2.Make sure the sound is within the

microphone range.

3.If the units emit a loud wailing sound (feeds

back), try moving the camera away from the

monitor or angle the monitor differently.

Specification///

Camera (Transmitter):

TV System: PAL/NTSC standard

Image Sensor: 1/3" CMOS

Integrated Lens: 5.6mm, F2.0 fixed focus

Resolution: 360 horizontal TV lines

Audio Signal/Noise Ratio: 45db

Video Signal/Noise Ratio: 48db

Frequency Range: 902~928MHZ

High Speed Electronic

Shutter: 1/60-1/15,000 sec

LED: 8 pcs

Mini. Illumination: 0.1Lux

Current Consumption: 200mA

Modulation: FM

Channel Selection: Electronic tuning with PLL

Overall size: 2.36"(W) x 2.76"(H) x 3.07"(D)

Monitor (Receiver)

Frequency Range: 902~928MHz

Current Consumption: 380mA

Channel selection: Electronic tuning with PLL

Signal/Noise Ratio: 38dB

Battery Li-Polymer

Voltage: 7.4V for monitor

Lithium Polymer Battery

(For Monitor): standby , Approx 3 hrs.

continuous > 2.5 hrs.

General

Operating temperature: -10°C to 40°C

14°F to 104°F

Humidity: Less than 85%

Approvals///

This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may

cause undesired operation

FCC NOTE:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user's authority to operate the

equipment.

Warranty

///

This product has one-year manufacturer warranty, which covers parts and labor only.

In the unlikely event that you encounter a technical or quality issue, please

contact local distributor, we will replace defective units within the warranty period.

Indice

Altri manuali GE Sistema di sicurezza

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente