Gefen HDMI CAT-5 IR Manuale utente

www.gefen.com

IR CAT-5

Extender

EXT-HDMIIR-CAT5

User Manual

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen Inc.

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and

any accompanying documentation without prior written notice.

HDMI CAT-5 IR Extender is a trademark of Gefen Inc.

All trademarks are the property of their respective companies

ASKING FOR ASSISTANCE

Rev X2

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Sender Panel Layout

5 Sender Panel Descriptions

6 Receiver Panel Layout

7 Receiver Panel Descriptions

8 Connecting And Operating The HDMI CAT-5 IR Extender

9 Adjusting The HDMI CAT-5 IR Extender

12 Network Cable Wiring Diagram

13 Speciﬁcations

14 Warranty

Congratulations on your purchase of the HDMI CAT-5 IR Extender. Your

complete satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to implement and simple to operate.

The Gefen HDMI CAT-5 IR Extender

Extending state-of-the-art digital video displays, computer monitors and IR

control signals has never been easier.

Distances of up to 150 feet at 1080p resolution (300 feet at 1080i resolution)

are guaranteed to perform beautifully, giving you a reliable method of all-digital

extension while streamlining your installation cabling needs.

How It Works

At the A/V source end, you connect the HDMI CAT-5 IR Extender Sender

unit to your HDMI source and its IR blaster to your devices IR eye using the

supplied cables. At the remote end, your HDMI display connects to the HDMI

IR Extender’s Receiver unit. Two CAT-5 cables connect the Sender and the

Receiver units to each other, allowing for up to 300 feet of A/V source extension.

Power-cycle all equipment and you will experience remote HDTV extension with

full IR control of your HDMI source.

For a sleeker appearance of your A/V equipment and greater installation

ﬂexibility, optional Gefen IR eye (EXT-RMT-EXTIR) can be used to completely

hide the HDMI IR Receiver.

Note: The HDMI CAT-5 IR Extender system is HDCP compliant.

INTRODUCTION

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE HDMI CAT-5 IR EXTENDER

• The maximum cable extension is 300 feet (91 meters) for video resolutions

of 1080i and below.

• The maximum cable extension is 150 feet (45 meters) for video resolutions

of 1080p.

• If EMI (Electromagnetic Interference) is present anywhere near the CAT-5,

CAT-5e or CAT-6 video cables it may be necessary to use shielded cables.

This is to prevent possible interference from degrading the video signal.

Using shielded cable, however, will reduce the maximum distance that the

cables can be extended.

• Extensions under 130 feet (40 meters) can use Auto Equalization (Auto EQ)

which is on by default. Extensions over 130 feet (40 meters) will require you

to manually equalize your signal (see page 9).

• IR repeater functionality is only from the receiving unit to the sending unit. IR

data cannot be transmitted from the sending unit to the receiving unit.

• Each cable run must be one continuous run from one end to the other. No

splices or use of punch down blocks.

• High quality Shielded CAT-6 cabling should be used for maximum

performance.

• Do not use stranded or low/no skew cabling. Solid core cabling should be

used for maximum performance.

• HDMI 1.2 Compliant and HDMI 1.3 Compatible

• HDCP Compliant.

OPERATION NOTES

Features

• Supports resolutions up to 1080p, 2K, and 1920 x 1200

• Sends video up to 300 feet (1080i) / 150 feet (1080p) away

• Small and Compact, easy to install

• Improved compensation for cable skew

• A/V signals are sent digitally over CAT-5 cable for zero signal loss

• Eliminates equipment noise in the viewing environment

• Extends any IR device

• HDMI/HDCP Compliant

Package Includes

(1) HDMI CAT-5 IR Sender

(1) HDMI CAT-5 IR Receiver

(1) 6 Foot HDMI Cable (M-M)

(1) IR Blaster

(2) 5V DC Power Supplies

(1) Owner’s Manual

FEATURES

Front Panel

Back Panel

4 5 6

SENDER PANEL LAYOUT

1 LED Power Indicator

This LED will become active once the included 5V DC power supply is properly

connected between the sender and an open wall power socket.

2 HDMI Input

This input will accept one HDMI source device that will be extended to the

receiver’s location.

3 5V DC Power Receptacle

This receptacle will require power from the included 5V DC power supply for

proper operation.

4 IR Out (Blaster)

The included IR transmitter (blaster) connects to this output port. The IR

blaster’s IR emitter will need to be placed on or near the IR receiver of a device

for proper relaying of commands from the receiver.

5 Video CAT-5 Port

This port is used to connect the sending and receiving units together for Video

trafﬁc. Use a CAT-5, CAT-5e or CAT-6 cable. When ﬁeld terminating cable

please adhere to the TIA/EIA-568-B speciﬁcation (page 12).

6 DDC CAT-5 Port

This port is used to connect the sending and receiving units together for DDC

trafﬁc. Use a CAT-5, CAT-5e or CAT-6 cable. When ﬁeld terminating cable

please adhere to the TIA/EIA-568-B speciﬁcation (page 12).

SENDER PANEL DESCRIPTIONS

Front Panel

Back Panel

1 4

5 6 7 8

2 3

RECEIVER PANEL LAYOUT

1 Equalization Adjustment

This Trim Pot is used to adjust the equalization that compensates for the

differences that are present in cable qualities and skews.Automatic equalization

(Auto EQ) is available and is set to on by default. Cable lengths that exceed 130

feet (40 meters) should not useAuto EQ.

2 Infrared (IR) Receiver

This IR receiver will relay IR commands from the receiving unit to the sending

unit for output to a IR transmitter (blaster) on a IR controllable device.

3 HDMI Input

This input will accept one HDMI source device that will be extended to the

receiver’s location.

4 LED Power Indicator

This LED will become active once the included 5V DC power supply is properly

connected between the sender and an open wall power socket.

5 Video CAT-5 Port

This port is used to connect the sending and receiving units together for Video

trafﬁc. Use a CAT-5, CAT-5e or CAT-6 cable. When ﬁeld terminating cable

please adhere to the TIA/EIA-568-B speciﬁcation (page 12).

6 DDC CAT-5 Port

This port is used to connect the sending and receiving units together for DDC

trafﬁc. Use a CAT-5, CAT-5e or CAT-6 cable. When ﬁeld terminating cable

please adhere to the TIA/EIA-568-B speciﬁcation (page 12).

7 Infrared (IR) Receiver Extension Port

This port will accept an optionally purchased IR extension cable (Gefen part#

EXT-RMT-EXTIR). This is useful for installations where the IR receiver, located

on the front panel (Item 2 on this page), is not in line-of-sight with the IR remote

control used to relay commands to the device at the sender’s location.

8 5V DC Power Receptacle

This receptacle will require power from the included 5V DC power supply for

proper operation.

RECEIVER PANEL DESCRIPTIONS

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Gefen Estensione

Gefen

Gefen EXT-2DVIKVM-ELR Manuale utente

Gefen

Gefen ToolBox GTB-DPKVM-3CAT7 Manuale utente

Gefen

Gefen EXT-HDKVM-LAN Manuale utente

Gefen

Gefen EXT-CAT5-1600A Manuale utente

Gefen

Gefen DVI-1000ST Manuale utente

Gefen

Gefen EXT-DVI-FM2000 Manuale utente

Gefen

Gefen EXT-DVI-1CAT5-ELR Manuale utente

Gefen

Gefen ex-tend-it CAT5-1500 Manuale utente

Gefen

Gefen EXT-DVI-1CAT6-GI Manuale utente

Gefen

Gefen EXT-COMPAUD-CAT5-142 Manuale utente

Gefen

Gefen EXT-PS2-100 Manuale utente

Gefen

Gefen CAT5-7000 Manuale utente

Gefen

Gefen EXT-VGA-CAT5-142 Manuale utente

Gefen

Gefen EXT-HDMI1.3-141SBP Manuale utente

Gefen

Gefen USB-400FO Manuale utente

Gefen

Gefen EXT-DVI-CAT5-4X Manuale utente

Gefen

Gefen HDMI-CAT5-4X Manuale utente

Gefen

Gefen EXT-DVI-1CAT5-SR Manuale utente

Gefen

Gefen USB 2.0 LR Extender EXT-USB2.0-LR Manuale utente

Gefen

Gefen EXT-HD-CP-FM10 Manuale utente

Gefen

Gefen EXT-DVI-3500HD Manuale utente

Gefen

Gefen GTB-DVIKVM-ELR Manuale utente

Gefen

Gefen DVI-100 Manuale utente

Gefen

Gefen Audio Extender Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente