Gefen Toolbox GTB-HDMI-3DTV Manuale utente
Gefen
Extender
for HDMI®3DTV
GTB-HDMI-3DTV
GTB-HDMI-3DTV-BLK
User Manual
ASKING FOR ASSISTANCE
Rev A5
29.6
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday, Pacific Time
Write To:
Gefen, LLC.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefentoolbox.com
Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
GefenToolBox Extender for HDMI 3DTV is a trademark of Gefen, LLC
HDMI, the logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing in the United States and
other countries.
© 2010 Gefen, LLC, All Rights Reserved
All trademarks are the property of their respective owners
CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Sender Unit Layout
5 Sender Unit Descriptions
6 Receiver Unit Layout
7 Receiver Unit Descriptions
8 Connecting and Operating The Extender For HDMI 3DTV
9 DIP Switch Configuration
11 Network Cable Wiring Diagram
12 Wall Mounting Instructions
13 Specifications
14 Warranty
1
INTRODUCTION
Congratulations on your purchase of the Extender for HDMI®3DTV. Your
complete satisfaction is very important to us.
GefenToolbox
GefenToolbox is a unique product line catering to the growing needs for
innovative home theater solutions. We specialize in total integration for your
home theater, while also focusing on going above and beyond customer
expectations to ensure you get the most from your hardware. We invite you to
explore our distinct product line and hope you find your solutions. Don’t see what
you are looking for here? Please call us so we can better assist you with your
particular needs.
The GefenToolbox Extender for HDMI 3DTV
The GefenToolbox Extender for HDMI 3DTV extends HDMI®and 3D content
including multi-channel digital audio at resolutions of up to 1080p Full HD up
to 330 feet (100 meters) from any Hi-Def source using one CAT-5 cable. This
product also provides an IR backchannel to control AV sources using the same
CAT-5 cable extension. Using this remote IR back-channel with an optional IR
Blaster, you can point to any one of the of the AV device sources, by pointing
towards the IR sensor to control Hi-Def sources as if they were located in the
same room or proximity to the display.
How It Works
Connect the GefenToolbox Extender for HDMI 3DTV sender unit to the 3D Hi-Def
source using the supplied HDMI cable. Connect the receiver unit to the 3DTV
Display. Use a single CAT-5 cable, up to 330 feet (100 meters) in length, to
connect the sender and the receiver units. Connect the locking power supplies
to both sender and receiver units and apply power to the 3D Hi-Def source and
3DTV Display. 3D content can now be displayed on the 3DTV Display along with
audio embedded in the HDMI signal.
2
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE EXTENDER FOR HDMI 3DTV
• CAT-5 or CAT-6 cables should not exceed 330 feet (100 meters).
• Shielded (STP) CAT-5 or CAT-6 is recommended. However, unshielded
(UTP) CAT-5 or CAT-6 is acceptable.
• NOTE: Shielded cable has an advantage by providing immunity to
Electromagnetic Interference (EMI) from cell phones and A/C motors.
• The Extender for HDMI 3DTV features the ability to generate compatible
EDID and Hot Plug signals for troubleshooting purposes when dealing with
difficult interfacing issues between Source devices and Displays. See the
section on pages 9 - 10 for troubleshooting purposes.
• HDCP content is not supported when the unit is in DVI mode. See page 10
for details.
OPERATION NOTES
3
FEATURES
HDMI 1.3 Features
• 225 MHz (up to 12-bit YUV 4:4:4 @ 1080p60)
• Deep Color
• Dolby TrueHD and DTS-HD Master Audio
• Lip-Sync
• CEC Pass-Through
Features
• Extends HDMI at 1080p up to 330 ft (100 m).
• 3DTV Pass-Through.
• Supports high bit-rate multi-channel audio formats (Dolby TrueHD / DTS
Master Audio) embedded in the HDMI 1.3 signal.
• Internal / External EDID Management.
• Locking power connectors.
• Built-in IR backchannel allows IR remote control of Source devices.
• Metal enclosure improves RF shielding.
• All-digital signal transmission for zero signal loss.
• Optional IR Blaster allowing IR remote control of Hi-Def source devices from
the remote viewing location.
• This product is HDMI and HDCP-compliant.
Package Includes
(1) Extender for HDMI 3DTV Sender Unit
(1) Extender for HDMI 3DTV Receiver Unit
(1) 6 ft. HDMI cable (M-M)
(2) 5V DC Locking Power Supplies
(1) User Manual
4
SENDER UNIT LAYOUT
Left
Right
3 4
12
Top
3
4
5
5
1
2
1 CAT-5 Output Jack
Connects the Sender to the Receiver unit using CAT-5 cabling.
2 IR Blaster Port
Connect an IR Blaster cable from this port to the Hi-Def source to control the
source from the viewing location (IR Blaster not included).
3 5V DC Locking Power Connector
Connect the included 5V DC locking power supply to this connector. Only use
the power supply shipped with this unit.
4 Power Indicator
This LED will turn bright red once the included 5V DC locking power supply has
been properly connected to the unit and the locking power supply has been
connected to an available wall outlet.
5 Locking HDMI Port
Connect a 3D Hi-Def source device to this HDMI port. Please see the Features
section on page 3 for supported HDMI 1.3 features.
5
SENDER UNIT DESCRIPTIONS
6
RECEIVER UNIT LAYOUT
Left
Right
3 4
12
Top
4
5
6
5
1
2
3
6
7
RECEIVER UNIT DESCRIPTIONS
1 IR Extender Port
Connect an IR extender to this port.
2 CAT-5 Input Port
Connects the Receiver to the Sender unit using CAT-5 cabling.
3 IR Sensor
Receives signals from the 3D source IR remote control. The IR signals are sent
back to the source device, when using an IR Blaster on the Sender.
4 Locking HDMI Port
Connect a 3D display to this HDMI port. Please see the Features section on
page 3 for supported HDMI 1.3 features.
5 Power Indicator
This LED will turn bright red once the included 5V DC locking power supply has
been properly connected to the unit and the locking power supply has been
connected to an available wall outlet.
6 5V DC Locking Power Connector
Connect the included 5V DC locking power supply to this connector. Only use
the power supply shipped with this unit.
Altri manuali per Toolbox GTB-HDMI-3DTV
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Gefen Estensione
Gefen
Gefen DVI-3000HD Manuale utente
Gefen
Gefen ETH-2-PLC Manuale utente
Gefen
Gefen EXT-DIGAUD-141 Manuale utente
Gefen
Gefen EXT-DVI-1CAT6-GI Manuale utente
Gefen
Gefen EXT-DVI-2CAT6DL Manuale utente
Gefen
Gefen USB-400FO Manuale utente
Gefen
Gefen USB-500 Manuale utente
Gefen
Gefen extendit series CAT5 1000S Manuale utente
Gefen
Gefen EXT-DP-CP-FM10 Manuale utente
Gefen
Gefen EXT-DVI-CAT5-ELR Manuale utente
Gefen
Gefen EXT-DIGAUD-141 Manuale utente
Gefen
Gefen EXT-CAT5-1600HD Manuale utente
Gefen
Gefen COMP-CAT5-148S Manuale utente
Gefen
Gefen EXT-WHD-1080P-LR Manuale utente
Gefen
Gefen EXT-DVI Audio-Cat5 Manuale utente
Gefen
Gefen DVI-1000HD Manuale utente
Gefen
Gefen GTV-HDBT-CAT5 Manuale utente
Gefen
Gefen EXT-DVIRS232-1FO Manuale utente
Gefen
Gefen EXT-DVI-CAT5-ELR Manuale utente
Gefen
Gefen GTB-HDKVM-ELR Manuale utente
