gefran DIGISTAR II Manuale utente
1
80544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
DIGISTAR II / DIGISTAR II Control / GF_BOX
code 80544B / Edition 03 -02-2013
INSTALLATION AND
OPERATION MANUAL
GENERAL INDEX
1 Introduction 3
2 Installation 5
3 Functions 8
4Connections 9
5 CMOS setup BIOS Phoenix Award 35
6 Technical characteristics 42
7 Technical-Commercial information 43
Graphic symbols used
To distinguish between the type and importance of the information provided in these instructions for use, graphic
symbols have been used as a reference to make interpreting the information clearer.
Indicates the contents of the various manual sections,
the general warnings, notes, and other points to
which the reader’s attention should be drawn.
Indicates a particularly delicate situation that could
affect the safety and correct working operation of
the controller, or a rule that must be strictly obser-
ved to avoid dangerous situations
Indicates a condition of risk for the safety of the
user, due to the presence of dangerous voltages
at the points shown
Indicates a suggestion based on the experience of
the GEFRAN Technical Staff, which could prove
especially useful under given circumstances
Information of a general and applicative
nature
Important notes for the safety and reliability
of the product.
Indicates a reference to Detailed Technical
Documents available on the GEFRAN web
site www.gefran.com
280544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
Gefran S.p.A. All Rights Reserved
This publication is the exclusive property of GEFRAN spa.
The information contained in this document is private and confidential, no part of this document may be repro-
duced, photocopied, transmitted, written, translated into other languages, using computer systems or any other
electronic, mechanical, optical, chemical, manual or other means, without the specific written agreement of Gefran
S.p.A
IMPORTANT
Even though all of the information contained in this document has been carefully checked, Gefran S.p.A. has no
responsibility with regards to the presence of mistakes or damages to people or things due to an incorrect use of
this manual, the same goes for the people or companies involved in the creation or production of this manual.
Furthermore, Gefran S.p.A. reserves the right to bring about changes to the contents and to the appearance of
this document, as well as to product specifications, at any time and without any warning.
Gefran S.p.A. does not provide any guarantee of any kind related to this material, including but not limited to, the
specific warranties of saleability and suitability for a specific objective.
Gefran S.p.A. declines any responsibility related to the use of its software on equipment not provided by Gefran
S.p.A.
PREFACE
The objective of this document is to provide a detailed description of the main technical characteristics of the har-
dware and firmware of the Gefran product called DIGISTAR II and GF-BOX.
Information necessary for a correct use of the products to which the manual refers follows. Such information is
related to the pinout of connectors with relative signals, setup of bridges and connections with external devices.
The majority of the hardware options can be configured by software through the set up data stored in the Eeprom,
therefore there are very few pure hardware options, which simplifies remarkably the configuration of the module
itself.
Package contents
GEFRAN provides the following standard products with DIGISTAR II, DIGISTAR II Control and GF-BOX:
• E.M.I. suppressor with ferrite core
• Power supply connector
• Panel fastening kit
• Instruction manual
3
80544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
1 • INTRODUCTION
DIGISTAR II and DIGISTAR II Control are industrial PCs with highly scalable functions and resources.
They are suitable for many industrial applications, from data centralization systems to plant supervisor, as
well as traditional HMI. The Control version can also be used as a machine control unit.
This version combines typical functions of a PC architecture with functions expressly created for control
applications, such as use of the VxWorks operating system with Seven programming environments, all in
a compact frame.
Equipped with TFT display (10.4” with 800x600 pixel resolution, 12.1” with 800x600 pixel resolution,
and 15” with 1024x768 pixel resolution), they can be completed with a resistive touch screen to facilitate
selection and input procedures.
DIGISTAR II and DIGISTAR II Control are equipped with an Intel™ processor; choices include Pentium
Celeron™ 600 MHz, Celeron Mobile™ 1500 MHz.
The special system architecture, based on ETX standard, keeps the product constantly in step with
technological advances. All of the processors are low voltage and do not need cooling fans.
DIGISTAR II and DIGISTAR II Control can be equipped with DOM solid state mass memory (or 2.5” HD
in the Control version) for better configuration based on the application and operating system used.
Thanks to a complete series of ports, such as Ethernet, USB, serial, parallel, PS/2 etc., DIGISTAR II and
DIGISTAR II Control can connect to the many different peripherals used by industry.
An extremely high level of connectivity is obtained by adding optional custom interfaces and standard PCI
(not available on the Control version) and PC104 expansion slots.
Available interfaces include those for CAN and the expansion for RS422/485 serial lines for Modbus.
Some functions on the DIGISTAR II Control, such as keyboard matrix management, LEDs, and timed
autostart logic output, are typical of machine or industrial line control.
Careful construction and mechanical design ensure easy installation, correct access to DIGISTAR II and
DIGISTAR II Control expansions, and correct maintenance to guarantee long life and reliability.
DIGISTAR II is available with Microsoft™ Windows™ XP Professional™ Multilanguage (MUI Pack) or
Microsoft™ Windows™ XP Embedded™ (English) on solid state disk.
DIGISTAR II Control is available with the VxWorks operating system on solid state disk.
DIGISTAR II and DIGISTAR II Control = Industrial PC panel with 10.4”, 12.1” and 15” display
480544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
GF-BOX is a highly scalable industrial PC in terms of functions and resources.
In particular the typical functions of a PC architecture have been integrated together with some fun-
ctions specifically created for control applications, in a compact case.
The characteristics of GF-BOX allow for it to be used in numerous industrial applications, from the machine
control unit, to the data centralization system. GF-BOX can also be fitted with a remote display up to 25 m.
GF-BOX is equipped with an Intel™ processor; choices include Pentium Celeron™ 600 MHz, Celeron
Mobile™ 1500 MHz or Pentium Mobile™ 1800 MHz.
The special architecture of the system, based on the ETX standard allows for constant adaptation of the
product to technological development.
All of the processors are of a low voltage and low consumption and do not require specific cooling fans
and allow for GF-BOX to be used even in heavy duty environments.
GF-BOX can be fitted with a solid state mass memory of a DOM type or a 2.5” HD for better configura-
tion according to the application and the operative system used.
Thanks to the complete range of ports available such as Ethernet, USB, serial, parallel, PS/2 etc, GF-BOX
can be located in different peripherals that can now also be found in an industrial field. If optional per-
sonalized interfaces and standard expansion slots PC1, PC104 are added to them, an extremely large
level of connectivity is achieved.
The interfaces available include CAN and expansions for serial lines RS422/485 for Modbus.
Some functional characters such as handling of the keyboard matrix, leds and logical output of the auto-
matic timed switch are typical of the machine control or of industrial lines.
The attention given to construction and mechanics allow the user to carry out easy installation, correct
access to the GF-BOX expansions and correct maintenance of the product itself in order to guarantee
duration and reliability along time.
GF-BOX = internal industrial PC with remote video up to 5 m
5
80544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
DIGISTAR II: MECHANICAL CHARACTERISTICS AND DIMENSIONS
2 • INSTALLATION AND CONNECTION
DIGISTAR II 10,4”
275
280
115,16
212
239
121,1
309
DIGISTAR II 12,1”
298,91
303
264
294,5 110,16
116,1
333
680544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
DIGISTAR II: MECHANICAL CHARACTERISTICS AND DIMENSIONS
DIGISTAR II 15”
361,3
365
110,96
307
337
116,9
395,3
DIGISTAR II : INSTALLATION AND FIXING SYSTEM
The installation system is the same for both 10,4”, 12.1”,15” DIGISTAR II and DIGISTAR II Control with display
versions.
After having carried out the housing according to the template indicated in the drawing, insert the DIGISTAR II
from the front, prepare the relative fixing blocks into the respective housings and screw down.
7
80544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
MECHANICAL CHARACTERISTICS AND DIMENSIONS INSTALLATION AND FIXING SYSTEM
After having carried out the cuts on the plate as indicated in the template drawing, screw GF-BOX using the screws
provided.
Carry out installation of the system by putting the air outlet at the top as shown in the drawing.
The connections of external resources are available at the bottom and through standard connectors.
The resources available are the same for the DIGISTAR II and GF-BOX.
INSTALLATION
Do not install the product within equipment or boxes that do not have suitable air circulation or a thermal
exchange that can maintain the temperature below the maximum temperature of the various models.
Check to make sure that the air passage ways are not obstructed: keep the inward and outward air filters
clean at all times
When installing the product pay special attention to the position of the same in order to avoid any possi-
ble accidental knocks.
GF-BOX
880544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
3 • FRONT PANEL: DIGISTAR II
The functions of the DIGISTAR II and DIGISTAR II Control front panel are the same for the 12.1” and 15” models.
Personalized
LOGO pocket
ENTER keyTAB key F1 to F10 keys
Green Led: BUTTON PRESSED
Yellow Led: POWER
Red Led: BATTERY FAIL Green Led: RUN
Green Led: AUX
Green Led: HD
It is also possible to have the front panels with 5 wire resistive Touch Screen.
9
80544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
EXTERNAL USER CONNECTIONS
(1) Standard mouse plug PS2
(2) AT keyboard plug
(3) 2 USB connectors (type A)
(4) ethernet output 10/100 bsp, standard RJ45
(5) ON/OFF power switch
(6) Standard VGA switch
(7) Matrix keyboard and Led connection, connection
(GT-TAST interface)
(8) External battery connection 3.6V
(9) Power connection and external fan plug
(10) Automatic switch connector
(11) COM 1 standard serial
(12) COM 2 standard serial
(13) Centronics parallel connection
(14) External floppy disk connection with integrated
supply
(15) GT-ETH board expansion slot
(16) GT-SER 2 board expansion slot
(17) GT-CAN board expansion slot
(18) PCI expansion slot
(19) Monitoring led
(20) AUX slot, auxiliary connection
10 97643
2
1
11 12
13
14 8
20 5
18
16
15 19
17
(details of user connection)
By opening the cover of DIGISTAR II you can access the control electronics and some internal resources.
For installation and the use of internal resources refer to the technical manual.
4• CONNECTIONS
10 80544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG
PS/2 mouse and keyboard (1) and (2)
2 connectors and 6 minidin poles are provided for external keyboard and mouse
DESCRIPTION OF THE CONNECTIONS OF USER RESOURCES
KEYBOARDPin number MOUSE
Signal
KBD DATA
N.C.
GND
5 VDc
KBD CLK
N.C.
Function
Keyboard Data
N.C.
GND Power
+ 5 Volts
Keyboard Clock
N.C.
Signal
MS DATA
N.C.
GND
5 VDc
MS CLK
N.C.
Function
Mouse Data
N.C.
GND Power
+ 5 Volts
Mouse Clock
N.C.
1
2
3
4
5
6
Accessories and expansions such as keyboards (DIGITAST) and remote displays (DIGIPANEL) are availabe to
complete the DIGISTAR II, DIGISTAR II Control and GF-BOX products.
The DIGITAST + Touch-Pad keyboard can be connected to the DIGISTAR II via two PS/2 interfaces (Keyboard and
Mouse).
The DIGIPANEL+Touch-Screen remote display can be connected to the DIGISTAR II via a VGA interface.
Connection with DIGITAST and DIGIPANEL
VGA
PS/2 Mouse
PS/2 Keyboard
DIGIPANEL
DIGITAST
GF-BOX
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali gefran Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
