Genaray OLED-55 Manuale utente
OctaLux LED - USER MANUAL 1
USER MANUAL
OLED-55
OCTALUX LED
OctaLux LED - USER MANUAL
2
Thank you for choosing Genaray.
The OctaLux LED Light Softbox produces bright, soft, and
consistent light that’s designed for use in the studio or on
location when shooting portraits, beauty/fashion, tabletop
products, and interviews. 240 individual LEDs generate a
5500 K daylight-balanced light that creates warmth and
glow on your subject. This continuous light emits very
little heat, so it can be used for extended periods without
overheating, and it allows you to get up close for intimate
shots. A dimmer control affords the ability to change the
light output from 10% to 100%.This is a great feature when
environment conditions alter the amount of light needed
for proper exposure.
OctaLux LED
INTRODUCTION
OctaLux LED - USER MANUAL
The housing is sturdy, and the LEDs are not prone to
breakage like fluorescent fixtures, making the Genaray
OLED-55 ideal for everyday usage. The OctaLux LED Light
Softbox is 31.5˝ (80 cm) in diameter, and it attaches with
tension rods to the integrated speed ring, making setup a
snap. Additionally, you have the option of three diffusion
attachments. The diffusers help soften the light output,
which is more flattering and minimizes harsh shadows.
Introduction ................................2-3
Precautions ................................4-5
Overview ......................................6-9
Assembling the Softbox ........10-11
Attaching the Diffusers .........12-13
Mounting the OctaLux .................14
Powering the OctaLux .................15
Disassembling the Softbox ...........16
Specifications ...............................17
Warranty .......................................19
TABLE OF
CONTENTS
OctaLux LED - USER MANUAL
4
PRECAUTIONS
· Please read and follow these
instructions, and keep this
manual in a safe place.
· Keep this product away from water
and any flammable gases or liquids.
· Do not leave the device in a
closed vehicle under the sun
or in other areas subject to
very high temperatures.
· Make sure this product is powered off
when plugging it into a power source.
· Always remove the power cord by
holding the plug; do not pull the cord.
· Disconnect the power cord from
the power supply when not in use.
· Use only the correct,
recommended voltage.
· Do not attempt to disassemble
or repair this product. There are
components inside that can produce
a hazardous electric shock.
PRECAUTIONS
OctaLux LED - USER MANUAL 5
PRECAUTIONS
· Do not stare at the light
when it is powered on.
· Do not point directly towards the
naked eye (especially those of
infants and small children)—it
may lead to visual impairment.
· Avoid any unnecessary impact to the
unit, as this can damage the LEDs.
· Handle this product with care.
· Do not touch the LEDs or
expose them to moisture.
· If necessary, clean the LEDs
with only a lint-free, cotton
cloth. Do not smudge.
· Keep this product away from children.
· Make sure that this product is intact
and that there are no missing parts.
· All images are for illustrative
purposes only.
OctaLux LED - USER MANUAL
6
PRODUCT
OVERVIEW
OctaLux light head
LEDs
Reflector dish
Locking knob
Tilt-adjustment knob
120 V AC/DC
power adapter
AC power
cable
Diffuser cap
OctaLux LED - USER MANUAL 7
PRODUCT OVERVIEW
Mounting socket
Integrated
speed ring
DC power input
socket
Handle socket
On/off
dimmer knob Front
diffuser
OctaLux LED - USER MANUAL
8
PRODUCT
OVERVIEW
Inner diffuser
8 × tension rods
Internal diffuser ringlets
Softbox
tension-rod
pockets
Side B
Side A
OctaLux LED - USER MANUAL 9
PRODUCT OVERVIEW
Touch-fastener strips
Access flaps
31.5˝ (80 cm)
OctaLux softbox
OctaLux light-head handle
Spacer
OctaLux LED - USER MANUAL
10
ASSEMBLING
THE SOFTBOX
1. Place the OctaLux light head
faceup on a flat surface
2. Open the access flaps on the back
of the OctaLux softbox, place the
softbox around the light head. It will
take shape with the following steps.
3. Insert the first tension rod (side B)
in any of the eight pockets at the
outer edge of the OctaLux softbox.
4. Insert the other end of the tension rod
(side A) into the speed-ring socket
on the side of the light head.
5. Insert the next rod at the opposite side
(180°) of the first rod. Insert one end
into the correct pocket on the softbox,
and then insert the other end into the
corresponding speed-ring socket.
INSTRUCTIONS
Indice
Altri manuali Genaray Accessori per fotocamere
Genaray
Genaray BLT-60BA Manuale utente
Genaray
Genaray CRV-5-W Manuale utente
Genaray
Genaray LED-6200T Manuale utente
Genaray
Genaray LED-6800 Manuale utente
Genaray
Genaray CRV-10-SW Manuale utente
Genaray
Genaray RGB Series Manuale utente
Genaray
Genaray SSL-36 Manuale utente
Genaray
Genaray Led-5300 Manuale utente
Genaray
Genaray LED-7500T Manuale utente
Genaray
Genaray BATON-BAT Manuale utente
