Genee World IQ-Pad Manuale utente

Using the iQ-Pad

learning response system

with ClassComm software

Quick set up guide

Leaders in learning technology

Minimum system requirements:

• Processor:PentiumIII450MHzprocessor(1gigahertz(GHz)Pentiumprocessorrecommended)

• Memory:256MB(512MBoraboverecommended)

• Display:800x600,256colours(Recommended:1024x768highcolour,32-bit)

• CDROMDrive:4xorfaster

• HDD:300MBfreeharddrivespaceforbasicinstallation–500MBharddrivespacerequiredfor

curriculumsamplecontent

• Microsoft.NetFramework2.0(includedininstaller)

• Microsoft®PowerPoint2003orabove

• AdobeFlashplayerversion9(includedininstaller)

• OperatingSystem:WindowsXP,WindowsVistaandWindows7Compatible

Quick set up guide

for iQ-Pad learning

response systems using

ClassComm software

What’sinthecase

iQ-PadLearning

ResponseSystem

Studenthandsets

Theseareusedbystudents

tosendresponses

Teacherhandset

Usedbytheteacher

tocontrolthe

presentation

SoftwareCDwith

QuickSetUpGuide

USBcable BatteriesReceiver

Step 1

iQ-PadsuseAAbatteries(seeimage2).

Preparethehandsets

1. iQ-Pad battery cover being removed

3. Battery cover being screwed on2. Batteries being inserted

Step 2

Preparethehandsets

PleaseensurethatthereceiverisdisconnectedbeforeyouinserttheClassCommInstallationCD.

• IftheCDdoesnotauto-run,youwillneedtomanuallyrun“ClassComm.exe”byexploringtheCD

contents(Fig1)

Fig. 1 – ClassComm CD Contents

TheClassCommInstallationMenuScreenwillopenasshownbelow.

• SelectClassComm Installationfromtheoptions.

• Followtheonscreenwizardinstructionstoinstallthesoftware.

• Duringinstallationthefollowingscreenwillappear(overthepage).

ClassComm

Installation

Menu Screen

ClassCommsoftwareinstallation

Step 3

ClassCommcanbeinstalledinEDUCATIONALmodeorCORPORATEmode.Thecoredierence

betweenthetwomodesofinstallationistheterminologyusedthroughouttheapplication.

EducationalmodeusesSTUDENT,TEACHER,CLASSandTEST.CorporatemodeusesPARTICIPANT,

PRESENTER,GROUPandEVENT.Themodeselectedfromthisscreencanbechangedlaterfrom

withintheClassCommsoftware.

Also,ClassCommhasanInterfaceEditorthatcanbeusedtofurthercustomisetheClassComm

softwarewithyourorganisationspreferredterminology–SeeClassCommHelp > Advanced

Functionalities > Interface Editorfordetails.ForthepurposeofthisQuickSetupGuide,

educationalmodeterminologywillbeused.

ThemainClassCommsoftwareinstallationisnowcomplete.

Note–Donotlaunchthesoftwareatthisstage.Followthroughthis

guidetocompletion.

ClassCommsoftwareinstallation(continued)

• ThereissomeoptionalsamplecontentthatcanbeinstalledforusewiththeClassCommsystem.

Thisstepwilladdcomplete,mappededucationalcontentforusewiththeClassCommsystem.

• FromtheClassCommInstallationMenuScreen,selecttheSample Contentbutton.

• Followtheon-screenwizardinstructionstoinstalltherequiredsamplecontent.

• WhenthemainClassCommsoftwareislaunched,thesamplecontentwillbeinstalledintothe

Resourcesarea.

Samplecontentinstallation(optional)

Step 4

InstallthePowerpointplug-in(SlideMapper)

Note–YouwillneedMicrosoft®Powerpoint®2003oraboveinstalledon

yourPCbeforeyouinstalltheplug-in

• ThePowerPointPlug-inorSlideMapper

isautilitythatisaddeddirectlyintoyour

Microsoft®PowerPoint®application.Itallows

for the mapping of your presentations within

PowerPoint.Themappingprocessassigns

questiondatatoyourslides(Example:True/

False,MultipleChoice,Numericandsoon)

• FromClassCommInstallationMenuScreen,

selectthePowerPoint Plug-inbutton.

• Followtheonscreeninstructionstoinstallthe

PowerPointPlug-in(SlideMapper)module.

• TheSlideMapperwillappearasshownbelow

withinMicrosoftPowerPoint®

Slide Mapper

within PowerPoint

Step 5

Connectthereceiverandtesthandset

communicationwithinClassComm

ConnecttheClassComm

receivertoanavailableUSB

portonthePC.AredLED

willlightupinthereceiver.

• Atthisstage,thePCwillautomaticallydetectthereceiverandcongurethedriversaccordingly.

NOTE–ThereceiverdriversareinstalledduringtheClassCommsoftwareinstallationdescribed

inSTEP3–CLASSCOMMSOFTWAREINSTALLATIONofthisguide.Itisimportanttoinstall

ClassCommsoftwarebeforeattachingthereceiver.

• LaunchtheClassCommsoftwareby

clickingtheiconfromthedesktoporfrom

Start > All Programs > ClassComm.

• Amessageinthebottom-leftarea

oftheClassCommsoftwarewill

appearstatingthatthereceiver

hasconnectedsuccessfully.

• ClickontheCommunicationtab

withinClassComm.Thiswill

displaythecommunicationgrid

asshownbelow.Turnonthe

handsetsandpressanykey

followedbythesendkey.

Thecorrespondinghandset

IDwilllightupinthegrid.

Thesoftwareisnowinstalledandthehardwareisconguredcorrectly

andhasbeentestedinthecommunicationareaofClassComm.

Step 6

• OpenablankPowerPointPresentationandaddaquestionwith4choicesasshowninthe

examplebelow.

• SelectthefollowingoptionsfromtheSlideMappertomatchtheinformationontheslide

• SlideType:MultipleChoice

• ResponseType:Text

• Answer:Selectthecorrectanswerchoice

• AnswerColour:Green

• Question:Cutandpastethequestiontextfromtheslidehere

• TextAnswers:Fromtheslide,highlightthecorrectanswerandclicktheAddbutton.

Say“Yes”totheconrmationmessagethatappears.

That’sit!Thebasicslidefunctionalityhasbeensetasmultiplechoicewith4textlabelchoices(A-D)

andthecorrectanswertobehighlightedingreenwhentheteacherrevealstheanswerduringa

presentation.Repeattheabovestepsasnecessaryandsavethepresentation.

FormoreinformationonthedierentquestiontypesandSlide

Mapper,consulttheClassComm User Guide(Seesectionon

AddingandmappingaPowerPointPresentation)

Creatingapresentation

Step 7

Altri manuali per iQ-Pad

Indice

Manuali Palmare popolari di altre marche

Honeywell

Honeywell Dolphin 9900 Manuale utente

Honeywell

Honeywell CN75 Manuale utente

MiTAC

MiTAC Mio 168 Manuale utente

Wasp

Wasp WDT92 Manuale utente

Texas Instruments

Texas Instruments TI-Nspire Manuale utente

AXEM Technology

AXEM Technology MBS Manuale utente

Armstrong

Armstrong Brain Wave Istruzioni per il montaggio

Unitech

Unitech TB128 Manuale utente

Symbol

Symbol MC9000-G Manuale di installazione e funzionamento

Unitech

Unitech HT1 1D Batch Manuale utente

Ingenico

Ingenico IWL220 GPRS Manuale utente

Intermec

Intermec CK61 Manuale utente

Symbol

Symbol c2000 Manuale utente

Symbol

Symbol MC18 Manuale di installazione e funzionamento

Acer

Acer n20 Manuale utente

Intermec

Intermec CK61 Manuale utente

Docomo

Docomo F-04H Manuale utente

Toshiba

Toshiba e350 Series Manuale utente

Genee World iQ-Pad Manuale utente

Manuali Palmare popolari di altre marche