Genelec 8260-414B Manuale utente

easy handling,

adjustable direction and angle

instruction manual

1. separate swivel joint from wall bracket 3. wall mount options

1.a

Loosen lower

bolted assembly

1.b

Gather swivel joint from

wall bracket

2.a

Adjust wall

plate vertically

2.b

Anchor holes drilling (6x)

diameter

-6 mm steel-anchor-bolt

-8 mm universal frame fixing set

2. wall bracket fastening

concrete wall - e.g.: steel-anchor-bolt M 6 x 65 mm

-drill and blow out hole, place anchor, wall bracket and

washer, tighten hexnut

perforated bricks - e.g.: unsiversal frame fixing set 8 x 80 mm

-drill, countersink and blow out hole, place anchor and bracket, fix hexagon

head wood screw

C injection-molded-anchor

without sieve bushing for concrete wall - with sieve bushing for perforated bricks / optional with threaded bolt M6 or threaded bushing M6

Advantages: fixing without pressure, enables repeated mounting, capable for diverse wall materials

Advantages: (please notice instructions of anchor manufacturers).

GENELEC Oy

Olvitie 5, Fin-74100 Iisalmi, www.genelec.com

24478-015-55 Rev.01 03-80-354-00 4/15

WALL MOUNT for GENELEC 8X5X - Series + 8260A - 8260-414B

- For GENELEC 8260A, 8351A, 8250A, 8050A

- Use six anchors per wall bracket

- Choose a position and mounting method compliant with local

- building codes and regulations

- For use only by trained installers

- For use only at proper walls with adequate anchors (see 3.)

- Not suitable are fragile walls. Beware of power supply lines and water conduits.

- In case ask an expert.

- Inspect bolted assemblies periodly

- For indoor use only

instruction manual

4. installation

5. settings 6. dimensions safety instructions

4.a

Bolt the monitor

to adaptor plate.

Use four screws

M6 x 14 mm

with washers

Tightening

torques

10 Nm

For horizontally

mounting of the

GENELEC 8251

turn the adaptor

plate

5.a

Continuously adjustable up to 30°,

by fixing the upper bolted assembly

6.a

hole pattern:

127 x 70 mm - M6

5" x 2-3/4" - M6

&

VESA 100 x 100 - M4/5

VESA 3-15/16" x

3-15/16" - M4/5

6.b

Weight: 1.8 kg

5.b

Pivoting attachment

around vertical axis

4.b

Replace swivel joint (with mounted 8260A)

into wall bracket

easy handling,

adjustable direction and angle

WALL MOUNT for GENELEC 8X5X - Series + 8260A - 8260-414B

4.c

Secure swivel joint to the

wall bracket by tightening

lower bolted assembly

Indice

Altri manuali Genelec Rack e supporto

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente