GENEVO PRiMA 6 Manuale utente
Installation manual
PRiMA 6 – 12 – 16 alarm control
panels
Read this manual thoroughly before starting any installation
work
Installation manual Rev. 1.0 for firmware 1.03xx
©2014, Genevo sp. z o.o., all rights reserve .
Designed and manufactured in Poland.
Table of contents
1Safety relate information.....................................................6
2Manufacturer's responsibility................................................7
3Han ling of waste electronic equipment an waste
batteries...................................................................................8
4General information...............................................................9
5Features an general specification........................................9
5.1PRiMA16 system...........................................................9
5.2PRiMA6 system...........................................................10
5.3PRiMA12 system.........................................................11
6System components.............................................................13
6.1Control panel main boar ..........................................13
6.2LCD keypa .................................................................14
6.3EXT-Z8 zone expansion mo ule.................................15
7Installation an evice connection......................................16
7.1Selection of mounting location for system
components.....................................................................16
7.2Enclosure an control panel main boar installation 17
7.3Making electrical connections....................................18
7.3.1Connection of primary power source to the
control panel.............................................................18
7.3.2Connection of keypa s an expansion mo ule
to the Bus..................................................................19
7.3.3Connection of etectors...................................20
7.3.3.1Examples of connection of etectors using
ifferent line termination...................................22
7.3.4Connection of soun ers....................................25
7.3.4.1Soun ers without back-up battery.........25
7.3.4.2Self-containe sirens (with a back-up
battery)................................................................26
7.3.4.3Sirens triggere with “+12V” signal........27
7.3.5Connecting of evices to PGM outputs............28
7.3.5.1LED in icator connection........................29
7.3.5.2Connection of evices with Common-
triggere inputs..................................................29
7.3.5.3Relay connection.....................................30
7.4Back-up battery connection.......................................30
7.5Installation of SIM car ...............................................30
8First run an installer programming....................................31
8.1First run.......................................................................31
8.2GSM operator selection.............................................35
8.3Starting service mo e without knowing the installer
co e.................................................................................35
8.4Har ware factory reset...............................................37
8.5Programming using a computer.................................39
8.5.1Programming using GPRS connection..............40
8.6Programming without computer................................41
8.6.1Restoring factory efault settings.....................41
8.6.2Service mo e entering an exiting...................42
8.6.2.1Service mo e keypa navigation.............42
8.6.3Service functions list.........................................46
8.6.3.1General settings.......................................46
8.6.3.2Har ware.................................................49
8.6.3.3Partitions settings....................................52
8.6.3.4Zones........................................................53
8.6.3.5Outputs....................................................61
8.6.3.6SMS an voice notification......................66
8.6.3.7ARC reporting..........................................68
8.6.3.8SMS remote control.................................69
8.6.3.9Sche ulers (PRiMA16, PRiMA12 only)....72
8.6.3.10Quit installer mo e................................72
9SPECIFICATIONS....................................................................73
9.1PRiMA16 main boar ..................................................73
9.2PRiMA6 main boar ....................................................74
1 SAFETY RELATED INFORMATION
•PRiMA16 alarm control panel is an electric evice,
that requires AC 230V 50Hz supply for its operation.
•Lack of care uring installation may impose serious
hazar for health or life!
•An alarm panel shoul only be installe by a quali-
fie technician.
•All operations that require an access to primary
(mains) circuits shall only be performe with the cir-
cuit shut own, e.g. by using a circuit breaker.
•It is forbi en to use fuses with ifferent rating than
specifie in the technical ocumentation an /or
nameplate.
•A great care shoul be pai to proper selection of
the mains transformer, an to use a properly rate
security circuit (if a transformer with multiple sec-
on ary circuits is use ).
•After the installation is complete , the enclosure
which contains mains connection shall be secure
to avoi access by unauthorize person.
•All packaging materials (plastic bags, bubble wrap),
after unpacking, shall be kept away from the reach
of chil ren.
2 MANUFACTURER'S RESPONSIBILITY
A security system is a complex installation, containing
multiple components that require proper selection an
configuration. The installation shall be performe by a
qualifie technician, able to consi er multiple technical
requirements of a particular site. GENEVO takes no re-
sponsibility for improper configuration or behavior of a
security installation.
HANDLING OF WASTE ELECTRONIC
EQUIPMENT AND WASTE BATTERIES.
PRiMA16 system components are electronic evices,
ma e accor ing to the requirements of WEEE irective
on han ling of waste electronic equipment.
As a confirmation, the equipment is labele with a
crosse -out wheelie bin symbol, as require by the i-
rective.
This symbol on the pro uct, its packaging or
ocumentation means that it shoul not be
ispose of with a househol waste. It is your
responsibility to ispose of the waste equip-
ment separately from the municipal waste.
Contact your local authorities to fin the nearest place
of collection of waste electronic equipment, or look up
the list publishe on www.genevo.eu .
The security system may be equippe with a
lea -aci battery as a backup power source.
The waste battery shall be properly ispose
as require by the 2006/66/EC irective with
further up ates.
4 GENERAL INFORMATION
PRiMA16 by GENEVO is a mo ern intru er alarm con-
trol panel inten e for security installations for small
an me ium-size premises: flats, houses, shops,
workshops etc. Its feature list covers typical nee s of
these systems. It stan s out of the competition by it's
easy installation, straightforwar an intuitive pro-
gramming an , unmatche user frien liness. A huge
a vantage of PRiMA is the integrate GSM communi-
cator, allowing reporting to central station, personal
notification using voice channel an text messages,
an remote control using mobile phones. All this make
the protection by PRiMA truly effective.
System operation is performe by the means of LCD
keypa s with graphical user interface, which make the
access to all system functions easy an intuitive.
5 FEATURES AND GENERAL
SPECIFICATION
5.1 PRIMA16 SYSTEM
•Up to 16 programmable zones supporting
NO/NC/EOL/2EOL-NO/2EOL-NC line configurations,
•1 partition with support for „Stay mo e” sub-parti-
tion (part-set),
•2 programmable high current outputs (0.6 A, com-
mon switching),
•4 programmable low-current OC outputs (150 mA,
common switching),
•2 AUX terminals for auxiliary power supply (12 V,
0.6 A total),
•8 user co es + installer co e,
•share bus for keypa s an expansion mo ules with
automatic a ress configuration,
•built-in switching 2A mo e power supply, with bat-
tery charging circuit an eep ischarge protection,
•built-in GSM communicator with personal notifica-
tion (SMS, voice), reporting to CMS (ContactID au-
io, SMS) an GPRS programming,
•8+1 telephone numbers for notification,
•support for SMS remote controlling,
•8 sche ulers with weekly programming,
•EN 50131 Gra e 2 compliance,
•system programming via keypa or computer (RS-
TTL local programming, GPRS remote program-
ming).
5.2 PRIMA6 SYSTEM
•6 programmable zones supporting
NO/NC/EOL/2EOL-NO/2EOL-NC line configurations,
•1 partition with support for „Stay mo e” sub-parti-
tion (part-set),
Questo manuale è adatto per i seguenti modelli
2
Indice
