GenInterlock BRY-200A Manuale utente
Model BRY-200A
Description Generator Interlock Kit Bryant 150 and 200, Type BJ main Breaker
Main Breaker 150 or 200 amp Horizontal throw
Generator Breaker Top left 2 spaces
WARNING
Only qualified personnel should be working on the panel box
An amateur should NEVER open the panel box
Please follow all rules and regulations of the National Electric Code
Step 1: Disassemble the interlock. Place the bottom plate (holes only) on the cover to the edge of the main breaker and the 2 pole
breaker directly below the main and mark holes.
Step 2: Turn off main breaker and remove panel cover.
Step 3: Drill holes as marked on panel cover with supplied 3/16 drill bit and remove all burs from drilling cover.
Step 4: Insert screws from rear of cover, install bottom plate, and install top plate (slotted) install thread lock to screws and install
retaining nuts. Ensure proper movement.
Step 5: Install 2 pole Generator breaker on top left side and place Generator Warning Sticker on Generator breaker.
Step 6: Combine the zip ties to make a loop and install zip ties around top set of breakers in panel as shown in picture below. Pull on
ends to make tight around breakers. Trim zip ties as needed and install Warning label next to release tab on zip tie at
generator breaker.
Step 7: Re-Install panel cover, Verify proper operation of interlock. Main breaker ON, generator breaker OFF and generator breaker
CAN NOT be turned on. Generator breaker ON, main breaker OFF and main breaker CAN NOT be turned on.
Generator On Main On
Step 8: Place Generator start-up procedure label on panel box, Place CAUTION label on panel box and electric meter pan.
The MAIN and the GENERATOR breakers should NEVER be able to be turned on at the same time. If panel
cover is removed the Generator breaker is NEVER to be turned on. If for any reason the interlock does not
function properly, DO NOT USE and contact us immediately at Sales@GenInterlock.com for support and
instructions.
Thank You for your support,
GenInterlock Team
DISCLAIMER: GenInterlock.com is NOT responsible for misuse or improper
installation. All electrical equipment should be installed and maintained by
qualified personnel. Any consequences arising from improper use is the
responsibility of the user.
GenInterlock.com
732-339-4191
Indice
Altri manuali GenInterlock Interruttore automatico
GenInterlock
GenInterlock SIE-P2 Manuale utente
GenInterlock
GenInterlock SYL-200 Manuale utente
GenInterlock
GenInterlock SD-H200A Manuale utente
GenInterlock
GenInterlock SIE-P1 Manuale utente
GenInterlock
GenInterlock SIE-L2 Manuale utente
GenInterlock
GenInterlock GE-200B Manuale utente
GenInterlock
GenInterlock ITE-100 Manuale utente
GenInterlock
GenInterlock EAT-PN200 Manuale utente
GenInterlock
GenInterlock GE-100A Manuale utente
GenInterlock
GenInterlock EAT-CH200A Manuale utente
