GEOSOFT DENT ESTUS Manuale utente
2
USER’S MANUAL
www.geosoft.ru/en
Congratulations!
! On buying the device, be sure to check the delivery set, presence
and correctness of the Quality Warranty Card filling, the acceptance
certificate and product selling marks.
! Please, thoroughly read the user’s guide before using the device.
Keep the User’s guide for future use.
! Please, address to the manufacturer if you have some questions
when using the device.
Tel.: +7(495)663-22-11 (extension 109),
E-mail: geosoftdent@geosoft.ru
JSC GEOSOFT DENT
(Russia)
3
ESTUS USB
www.geosoft.ru/en
CONTENT
1. General information.........................................………………...
2. Delivery set………....................................…………………….
3. Technical specifications ……...........................………………..
4. Preparatory stage and working procedure... …………………...
5. Storage, transportation and use ………………………….……
6. Information on utilization……………………………………...
7. Symbol descriptions …………………………………………..
4
5
5
6
19
19
20
4
USER’S MANUAL
www.geosoft.ru/en
1. GENERAL INFORMATION
1.1. Intended use: Wireless adapter “Estus USB” is intended for
changing the working parameters of the “Estus Drive” endodontic
motor.
1.2. Precautions and Warnings
!Do not disassemble or modify the product. Violation of the device
integrity cancels the warranty.
!Avoid letting any liquid inside the product’s housing.
!Do not use the device close to flammable agents.
! This device requires special measures application for electromagnetic
capability (EMC) and should be installed and switched into operation
accordingly with the information in the Appendix of the “Estus Drive”
User’s Manual. It includes the requirement not to use the device close to
daylight lamps, radio transmitting equipment and remote controls.
! Dysfunction of the device operation is possible if used in
electromagnetic interference (EMI) area. Do not use the device close to
the electromagnetic equipment. This equipment is usually marked by
the sign.
!Do not use the device jointly with the different equipment or as a part
of the equipment, not included into the manufacturer’s product list.
! The device operates normally at a temperature of 10-35°С, relative
humidity of air not more than 80%, atmospheric pressure (101 ± 3) kPa.
Any violation of these restrictions may cause the device error.
5
ESTUS USB
www.geosoft.ru/en
2. DELIVERY SET
Wireless adapter “Estus USB” - 1 pc
User’s Manual - 1 pc
Warranty Card - 1 pc
Package - 1 pc
3. TECHNICAL SPECIFICATIONS
Power supply - USB-plug (5V, 500 mА);
The built-in radio module NF-03: frequency range - 2,4-2,525GHz,
max output capacity - +7 dBm (0,00501W) , cover range - up to 3m
in the direct vision.
Dust and water protection rate - IP41.
Dimensions- (58*18*8,5) ±3 mm
Weight - 6 ±2 g
Service life of the device - 5 years.
6
USER’S MANUAL
www.geosoft.ru/en
4. PREPARATORY STAGE AND WORKING
PROCEDURE
Step 1. Connecting “Estus USB”
Insert the “Estus USB” wireless adapter into the USB socket in your
PC.
The adapter indicator lights up WHITE
After transporting the device at the temperature less than + 5°C,
before use, keep it at the indoor temperature for 1 hour.
If
< +5 °С
1 hour
at +25 °С
white
indicator
7
ESTUS USB
www.geosoft.ru/en
Step 2. Pair creating with “Estus Drive” endomotor
To start working it is necessary to create pair between the wireless
adapter and the “Estus Drive” endomotor by radio channel.
Activate the pair creating mode on the “Estus Drive” handpiece (see
“Estus Drive” User’s Manual) and wait until “Estus Drive” identifies
the wireless adapter.
The adapter white indicator starts blinking and the computer screen
displays the adapter “Estus USB” autorun
The pair is created. Now with the help of the paired “Estus USB”
adapter it is possible to change all basic endomotor settings.
White
BLINKING
indicator
GREEN
indicator
8
USER’S MANUAL
www.geosoft.ru/en
The “Estus USB” wireless adapter is identified in the computer as the
usual removable flash-drive, which includes only one file DATA.bin
Step 3. “ENDOMOTOR ESTUS DRIVE” program start
On the website http://geosoft.ru/en/, click icon “Endodontic system
Estus” and then click the link “ENDOMOTOR ESTUS DRIVE”
(or click the link https://settings.geosoft.ru/)
А) In the popped up window, click on the Open button:
B) Specify the DATA.bin file path located on your “ESTUS USB”
flash drive and click Open:
9
ESTUS USB
www.geosoft.ru/en
The current settings (factory settings - by default) and a serial number
of an endomotor are loaded into the program boxes.
Now it is possible to change the required “Estus Drive” settings.
DATA.bin
10
USER’S MANUAL
www.geosoft.ru/en
Step 4. Editing the working sequence of files
А) To change the current file
type and/ or its working
parameters (for ex. file # 1)
click on the icon LIBRARY
on the right from the file.
B) In the drop-down FILES
LIBRARY, select the
required file, moving along
the chain:
file type >
(for ex., ROTARY FILES)
> manufacturer firm >
(for ex., DENTSPLY
MAILLEFER)
Altri manuali per ESTUS
4
Indice
