Ger Detect EASY WAY SMART Manuale utente

INDEX

Section 1

Critical Warning

Section 2

Overview

Section 3

Definition of the main unit buttons

Section 4

The long-range system

Section 5

Long-range system parts connection

Section 6

Long -range system operation steps

Section 7

The 3D imaging system

Section 8

3D imaging system communication steps

Section 9

GER 3D VIEWER operation steps

Section 10

3D imaging system operation steps

Section 11

The device parts and accessories

- Please be sure that all precautions are taken against risks.

- Do not use your device while it is raining or on extremely wet floor.

- Turn on the device after you make sure that all parts are in place and connected.

- Make sure that the device battery is fully charged before you start the search.

- If the device starts to give a beep sound, close the device and recharge the battery.

- when the battery will almost die the device will close automatically.

- It is recommended to read the user manual before starting on the device to understand

everything and to avoid the mistakes through the search.

- After the device starts to make sound and turn off automatically, put the battery on

charge and do not try to switch on the device without charging the battery.

- If the green light and the red light on the charger are on, it means the battery is full, and

if the battery is empty, the red light will be on.

- Be aware of high voltage resources, and do not use any charger other than the original

charger that comes with the device.

- Main unit of the device is under warranty against all electronic breakdowns for two (2)

years, any damages caused by user errors (laying open the main unit, hits, harms etc.) are

not within this warranty.

- Battery, antennas and tablet are also not under the warranty.

- You should follow the instructions in this user manual strictly to minimize the faults and

to use your device correctly.

We wish you all the best of luck in your search……

Section 1 (Critical warning)

Dear customer,

“Thank you for choosing EASY WAY SMART”

✓The world's unique and only technology that combines two systems within one

device.

✓Specialized in prospecting and searching for gold, precious metals, burials,

caves and voids inside the ground, with confidentiality and ease.

✓EASY WAY SMART is designed to operate in all kinds of terrain and in the

most difficult climatic conditions.

✓The smallest device with a radar sensing system and a 3D imaging system,

completely concealable.

✓The device depth is up to 18 meters underground.

✓The device works in 8 different languages.

✓Two search systems in 1 device.

Section 2 (Overview)

Description

Power Indicator: which lights up when the device is turned on after long

pressing the power button.

Power button: turn on the device by pressing the power button for two

seconds.

Long-range System Indicator: which lights up when activating the long-

range radar system.

Long-range system button: the system starts on after pressing this button.

Up-button: to select the target type by going up.

The target type indicators: (it turns ON when you select the traget type).

Down-button: to select the target type by going down.

The 3D imaging system button: it runs the 3D imaging system after you

press it.

Bluetooth Indicator: which lights up when connected to the tablet.

3D System Indicator: which lights up when activating the 3D imaging

system.

Section 3 (Definition of the main unit buttons)

Section 4 (The long-range system)

Transmitter and receiver antenna

Part 1

Radar system grip

Transmitter and receiver antenna

Part 2

The main unit

Signal transmission cable

Section 5 (Long-range system parts connection)

Step (1)

Step (3)

Step (2)

Step (4)

(1) Connect the two parts of the antenna together.

(2) Install the sensor handle to the antenna.

(3) Connect the signal transmission cable between the sensor system handle on the one side

and (4) the main unit on the other side.

As a user, you should remove all holdings that may affect the functionality of the device such

as a wrist watch, mobile phone, wallet, ring, and belt. Make sure that your shoes do not

contain any metallic items on them).

Turn on the device by pressing the power button for two seconds.

Section 6 (Long -range system operation steps)

The long-range system will operate automatically with its light indicator on.

You can choose the target type by pressing the Up and Down buttons.

After selecting the target to be searched for, securely

place the main unit to your waist and then hold the

sensor grip at a 90-degree angle in order for the

antenna to function properly.

It is essential to make sure that you are standing North to South.

The reason for that is that the ionic fields are radiations emanating

from gold and buried treasures that have been remaining under

the ground for a long time and have immersed and interacted

within the soil taking into account the nature of the Earth's

formation, and its alignment with magnetic lines north and south.

If no signal is obtained, change your direction from east to west,

from west to east, and from south to north.

When a signal is sensed, the antenna will turn towards the target

directly.

Follow the signal until the antenna turns back, this means that you

have walked past the target.

When this happens, confirm the location of the target from the four

directions (from south to north, from north to south, from west to

east, and from east to west).

Identify the search location by marking it as the focus of target

confirmation process.

NORTH TO SOUTH

SOUTH TO NORTH

EAST TO WEST

WEST TO EAST

Indice

Altri manuali Ger Detect Rilevatore di metalli

Ger Detect

Ger Detect Gold Hunter Manuale utente

Ger Detect

Ger Detect TITAN GER-400 Manuale utente

Ger Detect

Ger Detect TITAN GER-400 Manuale utente

Ger Detect

Ger Detect GOLDEN WAY Manuale utente

Ger Detect

Ger Detect Titan Ger 1000 Manuale utente

Ger Detect

Ger Detect Gold Hunter Manuale utente

Ger Detect

Ger Detect Gold Hunter Manuale utente

Ger Detect

Ger Detect Titan Ger 1000 Manuale utente

Ger Detect

Ger Detect Titan 400 Smart Manuale utente

Manuali Rilevatore di metalli popolari di altre marche

Garrett

Garrett MAGNASCANNER CS 5000 Manuale utente

Valex

Valex 1800200 Manuale utente

Gauss

Gauss MIL MD Manuale utente

Velleman

Velleman CS130 Manuale utente

Sears

Sears 321.596370 Manuale utente

Eriez

Eriez X8 Manuale utente

Steinberg Systems

Steinberg Systems SBS-MD-22 Manuale utente

Zircon

Zircon MetalliScanner m60c Manuale utente

nalanda

nalanda MD027 Manuale utente

REV Ritter

REV Ritter CB-7005 Manuale utente

Minelab

Minelab F1A4 Manuale utente

Fisher Research Labs

Fisher Research Labs F70 Manuale utente

Steinberg Systems

Steinberg Systems SBS-MD-12 Manuale utente

GOLDEN MASK

GOLDEN MASK 5 Manuale utente

Grizzly

Grizzly YM 203 Manuale utente

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Manuale utente

Treasure Cove

Treasure Cove Vibra-Probe 560 Manuale utente

Accurate Locators

Accurate Locators XL16 IMAGER Manuale utente