Ger Detect FRESH RESULT 2 SYSTEMS PLUS Manuale utente


•Critical Warning
•Over view
•LONG RANGE SYSTEMS
oDescription the main unit keys
•Geophysical system
oDescription the main unit keys
oStart working with the geophysical system
oFirst step:
oSecond step
•No result message
oFirst case
▪The solution of this case
oSecond case
▪The solution of this case
oThird case
▪The solution of this case
•Important information and notes
•Warning
•Parts and accessories

-Please be sure that all precautions taken against all risks.
-Do not use your device while it is raining or on wet ground
-You have to be sure that you are connecting the electric cables correctly
- Use the four probes and you have to Plant it under the ground more than 25 CM.
- don’t ever try to Plant the probes into the rocks.
-Turn on your device after you make sure that all parts are in place
-Make sure that the device battery is fully charged before you start searching
-If the battery starts to give a peep sound, close the device and recharge the battery
-It is recommended to read the user manual before start working on the device to
understand everything and to avoid mistakes doing the search
-After the device start to make a sound and turn off automatically, put the battery on
charge and do not try to start the device without charging the battery
- while charging the long range system when the green light in the charger turn on, this
will mean the battery is full.
- while charging the geophysical system when the green light in the device turn on, this
will mean the battery is full.
-Be aware of high voltage resources, and do not use any charger other than the original
charger that come with the device
-Main unit of the device is under warranty against all electronic breakdowns for two (2)
years, any damages caused by user errors (laying open the main unit, hits, harms etc.) are
not within this warranty
-Battery and antenna are also not within this warranty
-You should follow the instructions in this user manual strictly to minimize the faults and
to use your device correctly
“Warning”:When we send the device to the customer, we release the battery cables
because the international shipping laws, so you have to connect the battery cable into the
geophysical unite.
Critical Warning

Dear customer,
“Thank you for choosing FRESH RESULT 2 systems plus”
✓This product enables you to detect the presence of underground water.
✓FRESH RESULT 2 systems product is based on resistance principle.
✓It measures the resistance between the four probes placed on surface of the region
predicted to have water.
✓It compares the measured values and analyze it and display the result on the screen
✓The device can reach depth of 1200 meter under the ground
✓The device front range is 2000-meter square
✓The device displays the result on a color screen 4.3 inch
✓The device works on 4languages (Germany –English –French –Arabic).
✓It’s passable to have your device with any language you like.
✓All parts and accessories are in 1 shockproof handbag.
✓The total weight of the device with all accessories is 10 kg.
✓The guaranty credit is valid for 2years.

1- LONG RANGE SYSTEMS
This system specializes to cover vast areas and locate the water up to depth of 1200 M
Below the surface of the ground and Front Range of 2,000 meters.
The transmission unit: the main unit of the device is placed on the ground in the
middle of the area to be discovered, we connect the antenna of the signal
Transmitter to the main unit and plant the probes on "5" meters from each other
And connect them to the device.
Then we turn on the device and select a language “for example English”
- When we choose a
language the device will
take you directly to the
“main menu”
(main menu screen)
Click on “searching
systems”which contain
two search systems:
1. The long range
system
2. geophysical
system
(search systems screen)

We move between the
search systems through
navigation buttons and
we select the
“long range system”
This screen will popup to
inform you to “turn on”
the Long range unit
(infomation screen)
After you turn on the
long range unite you will
see on the screen that
the device start to send
signals to the ground
and then you can start to
search for water
Note: extend the length of the antenna
in the main unite to reach maximum
range of the device and to caver more
area
- Then we move on to the long range unit
which works on Digital screen through
which you can determine the front range to
be reached in the search
By using this system
(main unit –long range system)

Description of the main unit keys –LONG RANG UNIT
Keys Description
1
Navigation button
2
Selection button
3
Power button
4
Back button
Note
Before opening the device,
the user should connect all
parts of the system and
connect the Handel to be
able to open the device
power
We turn the device through
the power switch
“ON –OFF”
first you will open the
button on the side of the
device
and then you will use the
ON / OFF key
o

We move between the
languages through
“navigation buttons”
And we conform our
selection by pressing
on OK button
After selecting the
Language, we choose
the type of water that
we will search for it
1- Fresh Water
2- Natural Water
Then we choose the
Front Range of the
search.
We navigate between
front range options
using the
“navigation buttons”
you can choose as
follow:
✓500 meters:
(from 0 to 0500 m)
✓1000 meters
(from 0 to 1000 m)
✓1500 meters
(from 0 to 1500 m)
✓2000 meters
(from 0 to 2000 m)
Press “OK BUTTON”
to select front range.

•After selecting,
the front-range
the device will
Begin the
process of
search.
•Carry the device
as in the photo.
➢The user should position them self from the north to the south which is the
best method to detect underground water.
➢As When the device detects any presence of water within the selected range
on the device the device will Track the signal and guide you directly to the
water location point Under the ground thus, this system will be done.
➢After detecting the target, conform the target from for direction
o“North to South”
o“South to North”
o“East to West”
o“West to East”
➢And to now the depth and salinity, type of water and the density of water
You will use the geophysical system.
“Note”
If the antenna is open to the maximum the device will guide you to more
than 1 location where water exists, so you must shorten the antenna to
the minimum to enable the device to guide you to the nearest target.

2- Geophysical system
This system allows you to discover more details about the discovered water after
using the long-range system, a survey and analysis of the underground water and
the way the system works in the following way
Description the main unit keys –Geophysical system
Indice
Altri manuali Ger Detect Sensore di sicurezza






















