7
Gerber P2C™ Plotter
Site Preparation Checklist
In order to expedite the scheduling of your Gerber P2C Plotter installation, please complete this
checklist. Fax the completed checklist to Gerber at 860-871-3862.Once we receive the checklist, and
your Gerber P2C Plotter has shipped, we will call you to schedule the installation.
Description Complete
Minimum computer configuration:
My computer meets the minimum requirements: System OS: Windows 98, 2000, or XP,
CPU Intel® Pentium® processor 750 MHz or higher, 256 MB of RAM (1 GB
recommended), Hard disk space 40 GB or more, Video Display 800 x 600 or higher with
more than 256 colors, 1 or 2 USB ports (1 required for OMEGA security key), 1 or 2
parallel ports, 1 or 2 serial ports, and CD-ROM - 40X.See details on page 2.
$
Connection requirements:
I will connect the Gerber P2C 600, 1200, or 1600 using a serial port/cable.
I will connect the Gerber P2C 600, 1200, or 1600 using a USB port/cable.
I will connect the Gerber P2C 1600 using a Centronics interface port/cable.
$
$
$
Power requirements:
I have supplied the following electrical service in the Gerber P2C operating location:
•Single phase supply voltage: 100 to 120 VAC or 220 to 240 VAC
•Frequency: 48/62 Hz ±1Hz
•85 V A maximum
$
Weight and clearance requirements:
I do not have a loading dock, but I have a forklift to take the Gerber P2C 1600 off the
carrier’s truck, or
I do not have a loading dock or forklift and I have requested lift gate delivery service and
equipment necessary to move the Gerber P2C 1600 into my facility, or
I have a loading dock and a forklift or pallet jack to take the Gerber P2C 1600 off the
carrier’s truck.
The outside doorway into my facility is at least 30" (76.2 cm) wide.
Interior corridors and doorways are at least 30" (76.2 cm) wide.
If I need to turn a corner in the facility, the corridors and doorways are wide enough to
accommodate a turning radius for:
•Gerber P2C 1200 (26.9"/68.2 cm wide and 62.6"/159 cm long)
•Gerber P2C 1600 (29"/74 cm wide and 89"/226 cm long).
$
$
$
$
$
$
Work area and environmental requirements:
I have sufficient work area and the floor or counter top is even.
There is a clean area for storage of material. Material should not be stored on the floor.
My facility meets the environmental and cleanliness requirements.
$
$
$
Name: __________________________________________ Title: ___________________________ Date: ________________
Signature: _______________________________________ Company name: _______________________________________
Company phone: ______________________________________
