GG Telecom Gg03 Manuale utente

Introduction

1-2

Gg03 overview 3

-7

Getting started

6-13

Using

your headset 17-22

Using

your headset

with multiple Bluetooth devices

23-27

Function / Button matrix

28-29

LED indicator chart

30-31

Audio indicator chart

Additional

nformation

33-38

Declaration of

onformity

39-41

Regulatory information

41-42

Handle incoming and outgoing calls.

Adjust the volume.

Mute the microphone.

Voice dialing (if your phone supports this function).

Last call redial (if your phone supports Handsfree profile).

Reject the incoming call (if your phone supports Handsfree profile).

What's in the package?

your headset Bluetooth headset package comes equipped with a headset and a charging solution.

In this package you will find:

One Bluetooth headset.

One 100-240V power adapter.

One USB charging cable.

One user guide.

One portable charging cradle in the Gg03 package.

One removeable ear-hook in the Gg03a package.

Introduction

lntroduction

Your Bluetooth headset Gg03 is a portable headset solution based on Bluetooth wireless technology.

Please read the "Additional Information”before using your headset.

What is Bluetooth

ireless

echnology?

Bluetooth is the most advanced cable-replacement technology available today. It enables effortless,

cable-free connections between your Bluetooth devices. your headset and the Bluetooth enabled

phone can communicate within the range up to 10m (30 ft) outdoors or up to 5m (15 ft) indoors with

no solid objects in between.

How to

your headset

your headset is a Bluetooth V1.2 qualified product and supports both Headset profile and Handsfree

profile. your headset can store information and wirelessly interacts with up to three different

Bluetooth V1.1/V1.2 compliant devices, including mobile phones, PDAs and PCs or any Bluetooth

enabled device that supports Headset profile or Handsfree profile. This manual focuses on how to

use your headset with your Bluetooth enabled phone. When your headset is connected to your

phone, you can do:

Gg03 overview

1.Indicator LED

There are 3 colors(blue/red/purple) to show the status of your headset.

2.Multifunction button

To answer, end, reject a call and control advance functions by constituting with

volume control button (please refer to the Function/Button matrix).

3.Volume control button

To increase or decrease the volume of speaker and control advance functions

by constituting with MFB (please refer to the Function/Button matrix).

4.Ear-hook

To wear the headset on your ear, you can switch the direction as your habit.

5. Speaker

Plays the sound you receive on the call or the audio indicators (please refer

to the audio indicator chart).

6. Microphone

Voice input for outgoing voice.

7. Charging port

Approaching with the cradle to charge the battery of your headset.

8. Charging Cradle

Design for charging the headset by multiple power supplier such as switching

adaptor, USB cable or car charger.

Gg03 overview

Getting started

Before you can use your headset, you must do following two things:

1. Charge your headset battery, using an appropriate G.G. Telecom charger.

2. Pair your headset with a Bluetooth enabled device, for example, a mobile phone.

Charging

your headset comes with a built-in rechargeable battery. For the first time use, you need to charge

for 4 hours. During charging, the indicator shows a steady red light. When the battery is fully

charged, the red light is off. It takes 90-120 minutes to fully charge the battery. Do not charge your

headset for more than 1 day. The talk time of Gg03 is about 8 hours, and the standby time is about

220 hours. The more you talk using your headset, the less standby time your battery has. your

headset require longer charging times when not used over extended periods of time.

9. Charging Port

Plug in the USB charging cable to charge the battery of your headset.

10. Removable

Removeable ear-hook fits either ear.

Getting started

To charge your headset

1. Make sure the earhook forms an angle of 90˚.2.Secure the bottom of the headset on the cradle.

1 2

3.Press the tip of the earpiece firmly towards the cradle until you hear a click sound.

4.You will see the red light when the headset is properly charging.

5. It takes 90-120 minutes to fully recharge the battery. Red indicator is off.

6. Press the buttons on the both side of your cradle to remove your headset from your cradle.

3 4

Getting started

Gg03v

Gg03a

Getting started

Pairing

Power on your headset

Long press the MFB , then you will hear a power on melody and the blue indicator will quickly

flash twice. You could start the operation now.

Note 1:

The first time your headset is turned on, it might automatically be ready for pairing.

Note 2:

Long press: It refers to press and release and the duration is more than 3 seconds. After long

press, you should hear 1 long beep.

Short press: It refers to press and release and the duration is less than 1 second. After short

press, you should hear 1 short beep.

Gg03a / Gg03v

1.Plug the USB charging cable into the charging port of the headset.

2.Plug the other end of the USB charging cable into the PC's USB port, charging adapter or

car charger.

3.When charging is complete (Red indicator is off, remove the charging adapter or car

charger, and detach the USB charging cable from the headset.

to the LED indicator chart).

2. Perform a "Bluetooth device discovery" from the mobile phone.

3. Select your headset from the discovered devices list and confirm the following on screen

prompts.

4. When prompted by your phone, enter the passkey “1234”and your headset will confirm to

pair successfully with a pairing success melody.

Note:

If your headset is not successfully paired within 2 minutes, it will automatically leave pairing

mode. If there is no paired data in the paired devices list of your headset, it will power off

otherwise get into standby mode.

Power off your headset

Long press the MFB , then you will hear a power off melody and the red indicator will quickly flash twice.

Pairing your headset with your phone

Pair your headset with your phone by adding it to the list of paired devices in your phone. your

headset should be paired once with your phone before use. The two devices then recognize each

other when they connect. You do not need to pair it again until you want to use your headset with

another device or the pairing information is deleted from your phone. It is recommended that the

distance between your headset and your phone is as close as possible with no solid objects in

between.

1. Put your headset enter pairing mode by long pressing the Volume up button . You can see the

blue indicator and the red indicator cross blink per second, your headset is waiting for pairing

now. You can only put your headset into pairing mode when it is in standby mode (please refer

Getting started

Indice

Altri manuali GG Telecom Cuffia

GG Telecom

GG Telecom Gg01 Manuale utente

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente