Use and installation manual
S10L Tech Spotlight
Pagina 2 di 2
GIESSE TECH SRL
Via Sbrozzola, 7 – 60021 Camerano (AN) - Italy
Tel: 071 959252; website: www.giesse-tech.it; email: info@giesse-tech.it
Smaltimento
Informazioni sullo smaltimento dei rifiuti di
apparecchiature elettriche ed elettroniche per uso
domestico ai sensi della Direttiva RAEE (Rifiuti di
apparecchiature elettriche ed elettroniche). Questo
simbolo, posto su apparecchi elettrici ed elettronici e
sulla documentazione di accompagnamento, indica
che questi prodotti non possono essere eliminati con i comuni rifiuti
domestici. I prodotti devono essere conferiti in centri di raccolta
appositamente attrezzati, che provvedono gratuitamente allo
smaltimento, alla lavorazione, al recupero e al riciclaggio dei
materiali.
Non si possono smaltire con i rifiuti indifferenziati. Controlla le
norme sul riciclaggio del tuo comune e se esistono strutture per il
riciclaggio nella tua zona. Lo smaltimento abusivo del prodotto da
parte del detentore comporta l’applicazione delle sanzioni
amministrative previste dalla normativa vigente.
EN
WARNING
Please, read the instruction carefully before
installing and using the device
Do not use the device for other function
Do not open the device
Do not place near heat sources
Do not use in open space
DEVICE DESCRIPTION
The spotlight S10L Tech is a led lightning created to light up spaces
where there is no electricity. It is powered at very low safety voltage
by internal rechargeable batteries.
The kit includes: 1 device, 1 metal plate, 1 double-sided tape, 1
cable and on request a USB power supply.
USAGE
Slide the button from right (0) to left(I) to activate the spotlight.
Light activation depends on the models:
touch sensor;
or
motion sensor.
DEVICE CHARGING
The device charge status is indicated by the colour of the LED above
the cover:
RED LIGHT
low battery
BLU LIGHT
in charge
GREEN LIGHT full charge
When the device is in charge, it is not working.
There are two charging modes:
1. By micro USB cable connected to an optional and
external power supply connected (not supplied);
2. QI standard magnetic induction charging device (requires
induction base with USB cable and power supply5V – 1A).
Charging devices must be connected to an external power
supply with these characteristics:
Rated supply voltage/frequency/current:230V ac; 0,5A;
Rated output voltage/current:5V cc; 1A;
Warning: before connecting the charger to the power supply, verify
the correct supply voltage of the socket.
This kind of device should be always stored half-charged if not used
frequently. We recommend to charge the batteries once every six
months. If you do not use the item, batteries can deteriorate and
became dangerous.
INSTALLATION
The device must be installed with a magnetic clasp to a
plate fixed to the cabinet. The plate is fixed in the
following way:
By double-sided tape included in the kit: fix the double-
sided tape to the cabinet; remove the protective film
from the tape and fix the plate to the top of the tape and
press; We recommend carefully cleaning the surface
where the double-sided tape is fixed.
The item should be used in dry locations. It may be as well installed
and used indoor.
MAINTENANCE
The device should be cleaned externally exclusively
using a soft cloth wet by water or suitable detergents.
Warning: do not use aggressive solvents, alcohol-
based or abrasive products. Be careful not to scratch
the sensor. Do not spay water or detergent directly
on the product. Make sure the device is off and not charging when
cleaning.
ASSISTANCE
In case of malfunctioning of the device please contact the sales
point or the constructor technical assistance service.
Warning:it is forbidden to access internal parts of the device
opening the hard shell with tools or similar means.
GUARANTEE
The constructor guarantees the quality of their products, provided
that they are used in compliance with the instructions on this
manual, for two years since the delivery date.
In such period, the constructor commits to fix or replace those
products originally identified as faulty upon purchasing. Any change
or replacement happened during the guarantee period do not
extend the expiry date of the guarantee itself in any case.
Any modification performed after purchasing is not valid as far as
the guarantee is concerned.
WASTE DISPOSAL
Information about the disposal of electrical and
electronic equipment waste for domestic use
pursuant to the WEEE Directive (Waste Electrical and
Electronic Equipment). This symbol, placed on
electrical and electronic appliances and on the
accompanying documentation, indicates that these products cannot
be disposed of together with common household waste. The
products must be delivered to specially equipped collection centres,
which provide free disposal, processing, recovery and recycling of
materials. Not to be disposed with non reclyclable waste. Please
check your town regulation about recycling and if there are recycling
structures available in your area.
Illegal disposal of the product by the owner involves the application
of administrative fines provided by current legislation.
PRODOTTO BREVETTATO / PATENTED
