Gill W013 Manuale utente
Race Watch_W013
Instruction Manual
This watch comes with a 2 year warranty.
For warranty issues please contact your nearest stockist.
Proof of purchase required.
1.0 Introduction
Thank you for purchasing this watch.
The watch includes real time, daily alarm and a
regatta timer which times the starting of a race.
Your watch is carefully designed and produced for
regatta use. In order to utilise these features of your
watch, it is advisable to read the following notes
before using for the first time.
- Avoid exposing the watch to extreme conditions
over extended periods.
- Avoid rough use and severe impacts.
- Only a certified watch repairer should open the
watch case.
- Occasionally clean your watch with a soft
moistened cloth to help maintain its lifespan.
- Store your watch in a dry place when not in use for
extended periods.
2.0 Buttons Operation Summary
[S]
[L]
[M]
[S/L/S]
[S/R]
Mode Button [M]
- In function modes: Press to enter the next
mode
- In any setting display: Press to choose
among different settings
ST./LAP/SYNC. Button [S/L/S]
- In Daily Alarm Mode: Hold to test alarm
sound.
- In Timer Mode : Press to start or
synchronise.
- In setting displays: Press to increase the
value or hold to increase faster.
STP./RESET Button [S/R]
- In Daily Alarm Mode: Press to select the
Alarm Time ON/OFF.
- In Timer Mode: Press to stop or hold to
reset the timer.
- In setting displays: Press to decrease the
settings or hold to decrease faster.
Set Button [S]
- Press and hold for about 2 seconds to
enter the setting displays.
- In setting displays, press to exit and
return to the function mode.
Backlight Button [L]
- In any mode/display, press to turn ON the EL
backlight for about 3 seconds.
Note: The button operations are summarised
as above, for detailed operating instructions,
please continue reading.
3.0 Major Function Modes
[M] [M]
[M]
Real Time Mode Daily Alarm Mode Timer Mode
4.0 Real Time Mode
[S]
[L]
[M]
[S/L/S]
[S/R]
Day of Week
Real Time Date
How to set the Real time
- To set the Real time, date and other
settings press and hold the [S] button for
about 2 seconds in Real Time Mode. (The
second digit will start flashing.)
The Setting Sequence
- When the second digit starts flashing,
press the [M] button to move the flashing
digits following the setting sequence of the
diagram in next page or press the [S/L/S]
or [S/R] buttons to reset the second digits
to zero.
- When the Minute, Hour, Year, Month, Day
or LCD level are flashing, press the [S/L/S]
or [S/R] buttons to adjust the value.
- When the Format is flashing, press the
[S/L/S] or [S/R] buttons to select the 12/24
Hr format or Date format.
- When the Chime/Keytone ON/OFF
options are flashing, press the [S/L/S] or
[S/R] buttons to toggle it ON/OFF.
- When the setting is completed, press the
[S] button once to exit the setting
sequence. The setting display will return
to Real Time Mode automatically if there is
NO key-stroke for about 1 minute.
4.1 Real Time Mode - Setting Sequence
[M]
[M]
[M]
[M][M]
[M][M]
[M] [M]
[S] HOLD [S]
[M][M]
Keytone
ON / OFF
YearDay
12/24 Hr
Month
Date Format
Second Minute Hour
LCD Level
Chime
5.0 Daily Alarm Mode
[S]
[L]
[M]
[S/L/S]
[S/R]
To select the Alarm and Chime
ON/OFF
- In the Real Time Mode, press and hold the
[S] button for about 2s can enter to the
time setting, then press the [M] button to
scroll through the setting items. When the
Chime option appears, press the [S/L/S]
or [S/R] buttons to toggle the Chime
ON/OFF.
- When the chime indicator appears, the
chime is ON. The watch will beep once
every hour.
- In Alarm Mode, press the [S/R] button to
set the alarm ON/OFF.
- When the alarm indicator appears, the
alarm is ON. The watch will beep for about
30s at the alarm time.
- The alarm sound can be stopped
prematurely by pressing any key.
To test the Alarm sound
- Press and hold the [S/L/S] button to test
the alarm sound.
Alarm
time
Daily Alarm Mode
- In the Real Time Mode, press the [M]
button to enter Daily Alarm Mode
- The alarm time (hour, minute) is shown on
the middle row of the display.
- The real time (hour, minute) is shown on
the upper row of the display.
- The alarm will sound at the alarm time
every day when the alarm is ON.
Real
time
6.0 Timer Mode
[S]
HOLD [S]
[S]
[L]
[M]
[S/L/S]
[S/R]
Timer time
[M]
[M]
[M]
[M]
[M]
How to set the Timer
- In Timer Mode, press and hold [S] button for 2s, the hour digit will be flashing, press the [S/L/S]
or [S/R] buttons to adjust the time you want. Press the [M] button to scroll through the setting
items.
- When the Minute, Second digits are flashing, press the [S/L/S] or [S/R] buttons to adjust the
time.
- In SYNC setting, press the [S/L/S] or [S/R]
buttons can select between the SYNC Round
and SYNC Down. Please refer to Chapter 6.1
for more details.
- When the Alert option is flashing, press the
[S/L/S] or [S/R] buttons to toggle it ON/OFF.
Please refer to Chapter 6.1 for more details.
Key Lock Function (suspend buttons
operation during counting)
- Press and hold the [L] button to toggle the key
lock function ON/OFF, when key lock function
is ON, will appear on the top of the
display. The operation of the [S/L/S] and [S/R]
buttons will be suspended in order to prevent
key pressing by mistake.
6.1 Timer Mode - Countdown Timer
[S/R]*
[S/R]*
[S]
[S/L/S]
[S/R]*
[S/R]*
[S/R]*
User
Define
*Remark: Timer is stopped
Countdown Timer (Four Pre-set Values
& One User-defined Value)
- This watch’s timer has four pre-set values:
5.4.1.0, 5.Min, 3.Min and 1.Min, and one user
defined value. Press the [S/R] button to
change the display among them.
Multiples of the Pre-set Value
- After you have chosen one of the
pre-set values, you can multiply those
values by pressing the [S] button.
For example: If the pre-set value is
3-Min, press the [S] button once to
double it to 6 minutes; press the [S] button
twice to triple it to 9 minutes... and so on.
Press the [S/L/S] button to start the timer,
the countdown icon will start flashing.
Indice
Altri manuali Gill Orologio
