12. Make the following video settings (note – the camera settings in step 9 must be made before making the video
settings):
Set up the video settings
Video Settings Page Changes to Default
Resolution 1 1440P4:3
Loop 1 OFF
Microphone 4 OFF
Stamp 4 OFF
13. Swipe down to exit the Video Settings page.
14. Power off the camera by long pressing the Power/Mode button.
15. Install the SD card in the camera.
16. Test the camera:
a. Power on the camera by long pressing the Power/Mode button.
b. After powering on the camera should automatically start to record.
c. Stop the recoding the long pressing the Power/Mode button. The camera should turn off.
17. Refit the camera in the frame and refit the camera retaining screw with a 4mm hex key.
https://knowledge.faro.com/Hardware/GeoSlam/ZEB_Revo_and_Revo_RT/ZEB_Cam_for_Revo_-_GitUp_G3_Camera_Reset
Updated: Wed, 11 Oct 2023 20:02:38 GMT
4
