GLEELITE GL350BSWT Manuale utente

GL350BSWT Moving Head Lighting

User manual

Thanks for choosing our goods please read this manual carefully before your operating

Contents

Introduction........................................................3

Dimensions.........................................................4

Safety Information..............................................5

Using for the first time........................................7

AC power............................................................8

Data link..............................................................8

Setup....................................................................9

Menu chart..........................................................10

DMX Protocol&Channel Function.....................14

Service and maintenance.....................................19

Cleaning..............................................................20

Introduction

350W Beam Spot Wash 3 in 1 Moving head light with CMY

Model:GL350BSWT

Moving Head Lighting

Voltage:AC100V-240V

50/60Hz Power

Consumption:500W Light

source:YODN R17 350W

Color Temperature:8000K

Beam Angle:1.5°- 35° linear fast zooming.

Focus:High precision optical lens,electronic linear control

Linear Dimmer:Mechanical dimmer 0-100%

CMY Color Wheel:Cyan+Magenta+Yellow color wheel with total 15 colors

Rotating Gobo Wheel:12 rotating gobos+White/,bi-directional rotatable and gobo

shaking at variable speeds

Static Gobo Wheel: 13 interchangeable gobos + effect gobo+ white, and

bi-directionally rotatable and gobo shaking at variable speeds

Prism:12+36facet circular prism rotating in both directions at variable speeds

Dimmer:0-100% linear dimmer

Strobe:1-18/second,double lens strobe with adjustable speed

Pan and Tilt: Smoothly,automatic Pan/Tilt position correction,speed adjustable

Range:Pan540°，Tilt 280°

Effect:Color+Gobo+Prism+Strobe automatic operation function

Cooling:Fan Cooling

Control mode:Standard DMX 512, 3 pin,5 pin connector

Channel mode:21/23/28 Channels

Display Interface:LCD screen both in Chinese and English

IP rate:IP20,Built-in overheat protection,triggered high voltage protection.

Net Weight:19KG

Gross Weight:23.5KG(Carton)

Dimensions

Safety Information

The following symbols are used to identify important safety information on the product and in this manual:

WARNING!

Read the safety precautions in this section before

installing, powering, operating or servicing this

product.

This product is for professional use only. It is not for household use.

！

DANGER!

Hazardous

voltage. Risk

of lethal or

severe electric

shock.

WARNING!

Burn hazard.

Hot surface.

Do not touch.

WARNING!

Refer to user

manual.

WARNING!

High brightness

light source,

With risk of

burned eyes.

Protection

from burn

and fire.

DANGER!

Safety hazard.

Risk of severe

injury or death.

WARNING!

Wear

protective

Eye wear.

Warning!

High brightness light source,don’t look at the light directly so that keep the risk of burned eyes

away.

This product is for professional use only. It is not for household use.

This product presents risks of severe injury or death due to fire and burn hazards, electric shock

and falls.

Read this manual before installing, powering or servicing the fixture, follow the safety precautions

listed below and observe all warnings in this manual and printed on the fixture.

If have any problem,please contact the supplier.

PROTECTION FROM ELECTRIC SHOCK

• Disconnect the fixture from AC power before removing or installing any cover or part and when not in

use.

• Always ground (earth) the fixture electrically.

• Use only a source of AC power that complies with local building and electrical codes and has both

overload and ground-fault (earth-fault) protection.

• Before using the fixture, check that all power distribution equipment and cables are in perfect condition

and rated for the current requirements of all connected devices.

• Power input and throughput cables must be rated 20 A minimum, have three conductors 1.5 mm²

(16 AWG) minimum conductor size and an outer cable diameter of 5 - 15 mm (0.2 - 0.6 in.). Cables must

be hard usage type (SJT or equivalent) and heat-resistant to 90° C (194° F) minimum. In the EU the cable

must be HAR approved or equivalent.

• Use only Neutrik Powercon NAC3FCA cable connectors to connect to power input sockets. Use only

Neutrik Powercon NAC3FCB cable connectors to connect to power throughput sockets.

• Isolate the fixture from power immediately if the power plug or any seal, cover, cable, or other

Component is damaged, defective, deformed, wet or showing signs of overheating. Do not reapply

power until repairs have been completed.

• Do not expose the fixture to rain or moisture.

PROTECTION FROM BURNS AND FIRE

• Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).

• The exterior of the fixture becomes hot during use. Avoid contact by persons and materials. Allow

the fixture to cool for at least 10 minutes before handling.

• Keep all combustible materials (e.g. fabric, wood, paper) at least 100 mm (3.9 in.) away from the

fixture.

• Keep flammable materials well away from the fixture.

• Ensure that there is free and unobstructed airflow around the fixture.

• Do not expose the front glass to sunlight or other strong light sources from any angle.

• Do not illuminate surfaces within 200 mm (7.9 ins.) of the GL350BSWT

• Do not attempt to bypass thermostatic switches or fuses.

• Do not stick filters, masks or other materials onto any optical component.

• Do not modify the fixture in any way not described in this manual

Using for the first time

PROTECTION FROM INJURY

•When light up the fixture,please don’t look at the optical lens with eyes directly.Besides, don’t use the

camera light to point at the optical lens.

• Fasten the fixture securely to a fixed surface or structure when in use. The fixture is not portable when

installed.

• Ensure that any supporting structure and/or hardware used can hold at least 10 times the weight of all

the devices they support.

• Allow enough clearance around the head to ensure that it cannot collide with an object or another

fixture when it moves.

• Check that all external covers and rigging hardware are securely fastened.

• Block access below the work area and work from a stable platform whenever installing, servicing or

moving the fixture.

• Do not operate the fixture with missing or damaged covers, shields or any optical component.

Important!

After unpacking,please check the goods damage or not,which due to the transportation. If you

find damage, please do not use this item, then contact the dealer or manufacturer as soon as

possible.

•Please read the “Safety Information”before using the fixture.

• Check that the local AC mains power source is within the fixture’s power voltage and

frequency ranges.

•Please make sure the fixture use in “Safety Information” term.

AC power

Power voltage

Data link

Warning! Read “Safety Information” starting on page 5 before connecting the GL350BSWT

to AC mains power.

Warning! For protection from electric shock, the GL350BSWT must be grounded (earthed).

The power distribution circuit must be equipped with a fuse or circuit breaker and

ground-fault (earth-fault) protection.

Warning! Socket outlets or external power switches used to supply the GL350BSWT with

power must be located near the fixture and easily accessible so that the fixtures can easily

be disconnected from power.

Important! Do not insert or remove live Neutrik PowerCon connectors to apply or cut

power, as this may cause arcing at the terminals and damage the connectors.

Important! Do not use an external dimming system to supply power to the GL350BSWT as

this may cause damage to the fixture that is not covered by the product warranty.

Warning! Check that the voltage range specified on the fixture’s serial number label matches the

local AC mains power voltage before applying power to the fixture.

GL350BSWT fixtures accept AC mains power at 100-240 V nominal, 50/60 Hz. Do not apply AC mains

power to the fixture at any other voltage than that specified on the fixture’s serial number label.

A DMX 512 data link is required in order to control a GL350BSWT via DMX.

The GL350BSWT has 5-pin XLR connectors for DMX data input and output. The pin-out on all connectors is

pin 1 = shield, pin 2 = cold (-), and pin 3 = hot (+). Pins 4 and 5 in the 5-pin XLR connectors are not used in

the GL350BSWT but are available for possible additional data signals as required by the DMX512-A

standard.

Standard pin-out is pin 4 = data 2 cold (-) and pin 5 = data 2 hot (+).

The number of fixtures is either limited to 256 or limited by the number of DMX channels required by the

fixtures in relation to the maximum 512 channels available in one DMX universe, whichever limit is lower.

Note that if independent control of a fixture is required, it must have its own DMX channels.

Fixtures that are required to behave identically can share the same DMX channels.

To add more fixtures or groups

Connecting the data link

When the GL350BSWT turned on , the display screen and key

button get flash in every second once the fixture without the DMX

signal.When insert DMX signal,the display screen and key button

stop flashing, it stand for run into the DMX control mode. 20 seconds

later,the display will be in power save mode and the the key button

indicator turn off.

Setup

Control panel and menu navigation

350W 17R BSW+CMY control center to set the DMX.

When you choose a menu press OK , or view menus.

After finding your menu, Press to enter OK ,quit

After out of menu,press to see the working condition.

Connecting the data link

To connect the GL350BSWT to data:

1. Connect the DMX data output from the controller to the closest

GL350BSWT male 5/3-pin XLR DMX input connector.

2. Connect the DMX output of the fixture closest to the controller to the DMX

input of the next fixture and

continue connecting fixtures output to input.

3. Terminate the last fixture on the link with a 120 Ohm resistor.

Menu chart：

Main Menu

Sub Menu

Setting

Signal

Add

000-512

Velocity

000-255

Data Pack

000-512

Quality

000% - 100%

Start Up

000-255

Static ID

0000-9999

Return

►

Special

Channel Mode

21C

23C

28C

definition

Run

DMX

Sound

Auto

Dmx

amp

Off

Lamp Default

Off

Lamp Control

Off

Signal Clear

Off

DMX R

set

Off

Execute Reset

Cancel

ecute

X reverse

Off

Y reverse

Off

XY Sp

ast

Normal

Slow

XY Fback

Off

DMX Set up

off

Indice

Altri manuali GLEELITE Attrezzatura per DJ

GLEELITE

GLEELITE GLZ19S Manuale utente

Manuali Attrezzatura per DJ popolari di altre marche

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuale del proprietario

Chauvet

Chauvet OVATION E-930VW Manuale utente

Zumtobel

Zumtobel APHRODITE Home Manuale utente

Snow Masters

Snow Masters Zig Oscillator Manuale utente

EuroLite

EuroLite 50530554 Manuale utente

Beamz

Beamz BUV243 Manuale utente

thomann

thomann Stairville DJ Lase 40-G MK-III Manuale utente

Eagletone

Eagletone 6 Eyes Flower Manuale utente

EuroLite

EuroLite FLD-1508 Manuale utente

Technical Pro

Technical Pro LG8xSEA Manuale utente

JB Systems

JB Systems Lounge Laser DMX Manuale utente

Lightmaxx

Lightmaxx Vega Halo 90 Manuale utente

Elation

Elation FUZE WASH Z350 Manuale utente

Maverick

Maverick MK3 WASH Manuale utente

Infinity

Infinity TF-260C7 Fresnel Manuale utente

Chauvet

Chauvet EVE E-50Z Manuale utente

Eliminator Lighting

Eliminator Lighting E 138 Manuale utente

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuale utente