Glensound Dante BEATRICE R16 Guida all'installazione
BEATRICE R16
16 Channel Network Audio Intercom
PRODUCT DETAILS
6 BROOKS PLACE, MAIDSTONE, KENT, ME14 1HE. ENGLAND. TEL: +44 (0) 1622 753662
Visit our Website at www.glensound.com
Page 2of 34
Page 3of 34
Glensound Electronics Ltd
Thank you for choosing a new Glensound product.
All rights reserved.
Information contained in this manual is subject to change without notice, if in
doubt please contact us for the latest product information.
If you need any help with the product then we can be contacted at:
Glensound Electronics Ltd
1 –6 Brooks Place
Maidstone
Kent
ME14 1HE
United Kingdom
Telephone: +44 (0) 1622 753662
Fax: +44 (0) 1622 762330
EMAIL ADDRESSES
General enquires: office@glensound.co.uk
Technical enquires: techinfo@glensound.co.uk
Sales enquires: sales@glensound.co.uk
Page 4of 34
PRODUCT WARRANTY:
All equipment is fully tested before dispatch and carefully designed to
provide you with trouble free use for many years.
We have a policy of supporting products for as long as possible and
guarantee to be able to support your product for a minimum of 10 years.
For a period of one year after the goods have been despatched the Company
will guarantee the goods against any defect developing after proper use
providing such defects arise solely from faulty materials or workmanship and
that the Customer shall return the goods to the Company’s works or their
local dealer.
All non-wear parts are guaranteed for 2 years after despatch and any defect
developing after proper use from faulty materials or workmanship will be
repaired under this warranty providing the Customer returns the goods to
the Company's works or their local dealer.
SAFETY WARNING
This product can produce high sound levels via the headphone output.
Please take caution when operating this product as listening to excessively
high peak or sustained levels of volume may permanently damage human
hearing.
Page 5of 34
EU DECLARATION OF CONFORMITY FOR:
GS-BEATRICE R16
16 Channel Dante®/ AES67 desktop intercom
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
This equipment is manufactured by Glensound Electronics Ltd of Brooks
Place Maidstone Kent ME14 1HE is marked and conforms to the
following Union harmonisation legislation:
Low Voltage Directive: EN60065 and EN62368-1:2014
Emissions: BS EN55032:2015
Immunity: BS EN55035:2017
Signed for and on behalf of Glensound Electronics Ltd.
Gavin Davis, Managing Director
Maidstone, Kent, England
Date: 15/08/2019
Page 6of 34
RoHS DIRECTIVE
EC directive 2002/95/EC restricts the use of the hazardous substances listed
below in electrical and electronic equipment.
This product conforms to the above directive and for this purposes, the
maximum concentration values of the restricted substances by weight in
homogenous materials are:
Lead
0.1%
Mercury
0.1%
Hexavalent Chromium
0.1%
Polybrominated Biphenyls
0.1%
Polybrominated Diphenyl Ethers
0.1%
Cadmium
0.01%
Page 7of 34
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
REGULATIONS 2006 (WEEE)
Glensound Electronics Ltd is registered for business to business sales of
WEEE in the UK our registration number is:
WEE/JJ0074UR
Page 8of 34
GLENSOUND BEATRICE R16
Handbook Contents
Issue 2
Description Page No.
Contents
PRODUCT WARRANTY:........................................................................................................................4
OVERVIEW..........................................................................................................................................9
R16 FRONT PANEL LAYOUT.........................................................................................................10
R16 REAR PANEL LAYOUT ................................................................................................................. 13
MICROPHONE PHANTOM POWER......................................................................................................15
LOUDSPEAKER DIM LEVEL.................................................................................................................16
SIDETONE ........................................................................................................................................17
SPEAK KEY CONFIGURATION.............................................................................................................18
AUDIO BLOCK DIAGRAMS (analogue representation of digital circuits)................................................19
Audio Circuits TO Dante/ AES67 Network SEE ALSO FIXED MIXER ....................................................19
Audio Circuits FROM Dante/ AES67 Network SEE ALSO FIXED MIXER ...........................................20
FIXED MIXER ....................................................................................................................................21
CONNECTING TO 4-WIRE EQUIPMENT................................................................................................22
IFB/ AUX INPUTS...............................................................................................................................23
CONNECTING THE BEATRICE UNITS TO A DANTE NETWORK................................................................24
Getting Dante Controller ...............................................................................................................24
Connecting Beatrice To The Network .............................................................................................24
Audio Over IP Network..................................................................................................................24
Running Dante Controller..............................................................................................................25
Dante Controller TIP......................................................................................................................25
Device Not Showing Up In Dante Controller ...................................................................................26
AES67 MODE.................................................................................................................................... 27
UPDATING THE BROOKLYN MODULE.................................................................................................30
WIRING INFORMATION .....................................................................................................................31
XLR & JACK Wiring ........................................................................................................................ 31
D15 Socket Loop Input Wiring......................................................................................................33
D25 Plug Loop Output Wiring.......................................................................................................34
Page 9of 34
OVERVIEW
The BEATRICE range of IP intercoms was designed for broadcast, theatre and
professional audio applications.
Our Beatrice intercom system utilises the reliable and proven Dante® network audio
transmission protocol to allow real time distribution of uncompressed audio across
standard networks. As such the BEATRICE 16 channel units are also fully compatible
with other manufacturers’ equipment using the Dante® protocol. The Beatrice R16 is
also AES67 compliant.
All units in the system are designed to be very easy to use for the operator and simple
to setup for the technician. They includes all the basic functionality required for small
intercom systems and none of the overly complex installation requirements normally
associated with large systems.
The Beatrice R16 provides 16 intercom circuits on and off the AoIP network. It also has 2
analogue inputs & outputs to the network that can be routed to allow connectivity to
traditional 4-wire circuits. Four AoIP IFB circuits are provided to allow versatility of
system setup.
A front panel built in microphone and loudspeaker are provided, or alternatively, an
external microphone (Gooseneck or headset) can be connected to the front panel XLR
and headphones or external loudspeakers can also be used.
The name Beatrice was chosen for our intercom range as she was the love of Dante
Alighieri:
‘Dante had fallen in love with another, Beatrice Portinari (known as Bice),
whom he first met when he was only nine.’ Source Wikipedia.
Page 10 of 34
R16 FRONT PANEL LAYOUT
1. Headphone / Speaker Volume
This rotary knob adjusts the volume of the internal loudspeaker and front panel
headphones.
2. External Microphone Input
This is a balanced microphone input. It can accept dynamic and condenser
microphones and phantom power (12v) can be turned on/ off via an internal
link.
3. Panel Microphone
The panel microphone is a small electret microphone fitted behind the rugged
housing and is suitable for most communications purposes.
4. Speak to All Button
Pressing this this button enables the operator to turn on and talk to all 16
outputs simultaneously.
1. Headphone/
Speaker Volume
2. External
Mic Input
3. Panel
Mic
4. Speak To All
10. Mic Gain
9. Headphones
8. Loudspeaker
13. I/P Gain
11. Mic Select
12. Gain Adjust
6. Level
7. Speak To
Group
5. Present LED
15. Speak Keys
14. O/P Gain
Indice
Altri manuali Glensound Sistema di interfono
