Glide Gear Dev Dolly Pro Manuale utente
User Manual
For more informaon please visit our website: www.glidegear.net
Dev Dolly Pro
What’s in the box
For more informaon please visit our website: www.glidegear.net
(1)
(2)
(5)
(3)
(4)
(6)
(7) (8)
(9)
(1) Sled
(2) 4x sets of wheels
(3) 2x end spacers
(4) 1x low prole spacer
(5) 7.5” camera riser
(6) Camera plate, 75mm and 100mm
bowl adapters
(7) 3x Baby pin adapters
(8) 2x An-lt brackets
(9) Carry Case
Assembly
For more informaon please visit our website: www.glidegear.net
1Mount the 4 sets of wheels at each corner
of the sled.
Use the end spacers to clamp each track
extremity as in the picture on the le.
Use the supplied long thumb screws to
lock the track into posion.
The Dev Dolly Pro can accommodate
tracks from 1” to 2” in diameter (25 to
50mm).
2
Thumb screw
Height
adjustment
1”to 2” pipes
(25mm-50mm)
Assembly
For more informaon please visit our website: www.glidegear.net
3Mount the an-lt brackets on
each side of the sled.
Bracket adjustment
Adjust the posion of the bracket so it
goes under the track to prevent the
sled from lng out.
An-lt bracket
Track Mounng Opons
For more informaon please visit our website: www.glidegear.net
Mounng holes
The Dev Dolly Pro features mounng holes at the
boom of each spacer so that it can be mounted on
any tripod.
In addion, 3 baby stand adapters are supplied.
Simply screw the adapter at the boom of a spacer
to mount the Dev Dolly Pro onto a baby stand.
Baby pin adapter
For longer tracks, it is recommended to
place the low prole spacer in the middle
for extra support.
The low prole spacer has the same
mounng opon than the other
spacers.
Low prole spacer
For more informaon please visit our website: www.glidegear.net
Camera Mounng Opons
The Dev Dolly Pro includes: a 7.5”camera riser, a 75mm bowl adapter and a 100mm bowl
adapter. The bowl adapters can be used directly on the sled or on the camera riser.
To mount a bowl adapter onto the sled or the riser:
remove the 3 screws
Swap the plate with a bowl adapter
Mount the bowl adapter using the 3 screws
To mount the riser onto the sled, simply screw the
riser’s base plate on the sled’s mounng screw.
Indice
Altri manuali Glide Gear Accessori per fotocamere
Glide Gear
Glide Gear OH 200 Manuale utente
Glide Gear
Glide Gear DST 50 Manuale utente
Glide Gear
Glide Gear REVO 50 Manuale utente
Glide Gear
Glide Gear JB4 Quick-Jib Manuale di istruzioni
Glide Gear
Glide Gear DEV-1000 Manuale utente
Glide Gear
Glide Gear G2G Vest Manuale utente
Glide Gear
Glide Gear F2F 25 Manuale utente
Glide Gear
Glide Gear TMP 500 Manuale utente
Glide Gear
Glide Gear LEIOS SMOOTH-C Manuale utente
Glide Gear
Glide Gear AXJ-100 Manuale di installazione e funzionamento
