Globalmediapro IP09PHK Manuale utente
`
IP/ PoE Transmission
User Manual
0
`
Model：IP09PHK
90W 4 Port Long Reach PoE Extender over CAT5e
1
`
Introduction
IP09PHK is a 90W 4 port PoE switch device that can extend the PoE signal for up to 500M to enable 4 PoE
devices. It can perfectly work with PoE cameras to establish an advanced CCTV system used in large
scale spaces, such as road intersections, supermarkets, amusement parks, parking garages and so on.
Features
●Must work with IP09PR.
●Extends 4 PoE signals over a coaxial cable, with a distance up to 500M.
●Network bandwidth up to 100Mbps.
●Supports IEEE 802.3af, and 802.3at PoE, Max. 30W for each port.
●Power from IP09PR or an external power adapter.
●Built-in a thermostatic fan.
●Built-in 15kV ESD, 40A EFT, and 25A surge protection on the RJ45 ports.
2
`
Diagram
Power from a PoE Switch
Power from a Power Adapter at IP09PR
Power from a Power Adapter at IP09PH
3
`
Panel View
No
Interface
Function
1
On
To indicate the power status.
2
Uplink
To indicate the uplink status.
3
Overload
To indicate the status of PoE load.
4
Link 1-4
To indicate the link output status.
5
PoE 1-4
To indicate the PoE connection status.
6
Uplink Switch
To switch uplink interfaces.
7
Coaxial
To connect IP09CPR.
8
RJ45
To connect IP09PR
9
PoE Out
To connect network devices.
10
Console
To update firmware.
11
AUX DC 24-56V
To connect a power adapter.
4
`
No
Interface
Function
1
Power Jack
To connect with DC48 ~ 56V adapter.
2
Power LED
To indicate the power status.
3
PortMode LED
To indicate the status of port Mode.
4
PortMode LED
To indicate the status of port Mode.
5
Jumper
Reserved.
6
DIP Switch
To switch modes.
7
RJ45
To connect a network device.
8
PoE LED
To indicate the PoE connection status.
9
RJ45
To connect IP09PH.
5
`
Description 1 – LED Indication
IP09PH LED Indicators
Front LED Color
Function
LED OFF
LED ON
LED Blinking
Green (On)
Power Status
Power OFF
Power ON
Blue (Uplink)
Uplink Status
Unlinked
100Mbps
10Mbps
Red (Overload)
Overload Status
Normal
Power Overload
Green (Link)
Port 1-4 Status
Unlinked
Linked
Data Transferring
Blue (PoE)
Port 1-4 PoE Status
PoE OFF
PoE ON
Rear LED Color
Function
LED OFF
LED ON
LED Blinking
Green (RJ45)
Link Status
Unlinked
Linked
Data Transferring
Yellow (RJ45)
Link Status
Unlinked
Linked
Data Transferring
IP09PR LED Indicators
Front LED Color
Function
LED OFF
LED ON
LED Blinking
Green (ON)
Power Status
Power OFF
Power ON
Power Saving
(Breathing)
Blue (1)
Port 1 Mode Status
Unlinked/Standard
Ethernet Mode
100BASE-T1
(Constantly
Blinking)
Hardware Failure
(Blink Twice)
Blue (2)
Port 2 Mode Status
Unlinked/Standard
Ethernet Mode
100BASE-T1
(Constantly
Blinking)
Hardware Failure
(Blink Twice)
Rear LED Color
Function
LED OFF
LED ON
LED Blinking
Blue (PoE)
PoE Status
PoE OFF
PoE ON
6
`
Description 2 – RJ45 Pinout
IP09PH Port 1-4
PIN
Color
Data
PoE
1
Orange-white
TX+
PoE+ (Data Pair)
2
Orange
TX-
PoE+ (Data Pair)
3
Green-white
RX+
PoE- (Data Pair)
4
Blue
PoE+ (Spare Pair)
5
Blue-white
PoE+ (Spare Pair)
6
Green
RX-
PoE- (Data Pair)
7
Brown-white
PoE- (Spare Pair)
8
Brown
PoE- (Spare Pair)
IP09PH Uplink
PIN
Color
Data
PoE
1
Orange-white
DATA 1 +
Power+
2
Orange
DATA 1 -
Power+
3
Green-white
DATA 2 +
Power-
4
Blue
Power+
5
Blue-white
Power+
7
`
6
Green
DATA2 -
Power-
7
Brown-white
Power-
8
Brown
Power-
IP09PR
Pin
Color
Data
PoE
1
Orange-white
TX+ (DATA1+)
PoE+ (Data Pair)
2
Orange
TX- (DATA1-)
PoE+ (Data Pair)
3
Green-white
RX+ (DATA2+)
PoE- (Data Pair)
4
Blue
PoE+ (Spare Pair)
5
Blue-white
PoE+ (Spare Pair)
6
Green
RX- (DATA2-)
PoE- (Data Pair)
7
Brown-white
PoE- (Spare Pair)
8
Brown
PoE- (Spare Pair)
8
`
Description 3 – Transmission Performance
Refer to the charts below to find the power amount in different distances (the distance is measured from
Rx to IP09PH).
Cable
Power Supply
100M
200M
300M
400M
500M
Network Bandwidth
100Mbps
100Mbps
100Mbps
100Mbps
100Mbps
Power Output (IP09PH)
CAT5e
90W PoE Switch
71.6W
51.6W
34.9W
25.8W
18.9W
CAT6
56V 120W Power
Adapter at IP09PR
72W
51W
33W
26W
20W
CAT6
48V 120W Power
Adapter at IP09PR
51W
33W
24W
17W
13W
Remark
1. Distance may vary by cable quality, installation, and the performance of connected devices.
2. Using CAT.5e UTP/ STP/ FTP, CAT.6 UTP, and 75Ω coaxial cables is recommended.
3. Using Ethernet (Solid Conductor) and coaxial (Solid Center Conductor) cables is recommended,
other types of cable may affect the performance of power transfer.
4. Refer to PSE & PD Chart below to calculate power input for PD.
9
Indice
Altri manuali Globalmediapro Estensione
Globalmediapro
Globalmediapro HE01ST Manuale utente
Globalmediapro
Globalmediapro IP03PT Manuale utente
Globalmediapro
Globalmediapro HE01ST Manuale utente
Globalmediapro
Globalmediapro HDV-E100 Manuale utente
Globalmediapro
Globalmediapro HD-SDI CAT5 Series Manuale utente
Globalmediapro
Globalmediapro IP09CP Manuale utente
Globalmediapro
Globalmediapro KM03 Manuale utente
Globalmediapro
Globalmediapro IP01F Manuale utente
Globalmediapro
Globalmediapro HE01FT-4K Manuale utente
Globalmediapro
Globalmediapro SOF-101 Manuale utente
