GMP PROTOPIC AUTO-540 HS Manuale utente
2015. 07. 29
USER MANUAL FOR PROTOPIC AUTO-540 HS
Before operating the unit, please read this manual thoroughly and retain it for future reference.
The design / specification of the machine could be changed for improvement without any prior notice.
INDEX
◐ SAFETY ◐ HOW TO LAMINATE 42 page
Important Safety Instruction 3page
Safety Device 6page ◐ MAINTENANCE 48 page
Warning Stickers 8page
◐ TROUBLESHOOTING 49 page
◐ INSTALLATION
Packing Contents 10 page ◐ SPECIFICATION 54 page
Main Devices 11 page
Move & Installation 14 page ◐ DIGITAL SLEEKING SOLUTION
Introduction of DIGITAL SLEEKING SOLUTION 55 page
◐ HOW TO USE CONTROL PANEL
GLOSS & MATT SLEEKING
56 page
Details for Display 22 page HOLOGRAM SLEEKING 60 page
Control Panel 25 page METALLIC SLEEKING 64 page
Messages 29 page FILM SPECIFICATION 66 page
◐ HOW TO USE MAIN DEVICES
Feeding Area 33
page
Lamination Area 37
page
Cutting Area 38 page
Film Load / Replacement 39 page
Other Devices 41 page
Important Safety Instruction
"Important Safety Instruction " is for the purpose of user's safety
and prevention of Property loss. Read thoroughly and Use rightly according to the manual
Warning : If you ignore this symbol, you could suffer serious injury or death
Caution: If you ignore this symbol, you could receive a serious injury or loss of property
This symbol means a prohibited action. If you ignore a prohibited action, you could suffer a personal injury and damage the machine
This symbol means a required action. If you don't follow this action, your safety is not guaranteed.
Required action will be included in this symbol.
Reference: The sign above refers the contents for user's safety and prevention of Property loss.
☞ Power
Do not connect or disconnect with wet hands, as this will cause an electric shock
Do not overload a power supply, as this will cause a fire and an electric shock.
Do not use a damaged plug or lead, as this could cause a fire or an electric shock
Do not use other voltage and power supply other than specified, as this will cause a fire and an electric shock.
Make sure plug is in the socket, as it could cause fire or an electric shock
WARNING
3/66
Important Safety Instruction
It must be grounded for safety.
Otherwise, this could be a cause of trouble and electric shock.
Danger, Malfunction, loss of electricity could cause an electric shock
Do not pull the plug or bend improperly
☞ Installation
Do not use materials near a naked flame
Do not use the machine in the sealed place.
Only use the specified power and voltage. It can be a reason of fire flame or an electricity fire flame.
Do not dissemble, make repairs or convert the machine. Contact your dealer for repairs
Ensure all hair, neckties, necklaces, are kept free of the feeding table to avoid injury
Do not convert the safety device and safety switch.
Do not spill any liquids on the laminator as this will cause damage and a possible electric shock
Do not use the flammable spray or flammable materials inside or outside the machine. As this could cause a fire.
Do not allow children use of this equipment
4/66
Important Safety Instruction
☞ Power
When moving the product, turn off the power switch, disconnect the power plug from the socket
When laminator is not in use, you must turn off the power switch, disconnect the power plug from the socket.
☞ Installation
Danger - laminating blades are sharp and can cause injury.
More than 2 people are needed to carry this equipment to avoid personal injury or damage to the machine.
Keep gears and chains free of all materials
Do not touch the roller with your hand as you could be burnt.
Please avoid installing near the following places;
Gas stove, Ventilator or Air conditioner due the higher temperature or higher humidity
Do not place any materials on the laminator as they could catch a fire
Avoid the direct sunlight for the installing the machine
Make sure no vibration and dusts are found in the place during the installation.
Avoid the dark and slope place for installation
Do not place any materials on the laminator as they could catch a fire
Do not touch the film and laminating machine just after lamination finishes as you could be burnt.
Use the machine with laminating purpose only.
Tidy up the place near the laminating machine.
CAUTION
5/66
Safety Device
☞ Emergency Stop Switch
When emergency situation happened, it stops the running motor(rollers) rotation and system operation.
In case of emergency, use this switch.
☞ Position of E-Stop Switch ☞ How to use
Press the Red button to operate the Emergency Stop Switch.
All system is stopped when this is pressed.
Turn the switch to the right to release from Emergency Status.
Emergency Stop Switch
E-Stop S/W
6/66
Safety Device
☞ Laminating Roller Safety Cover
It protects the workers from the burnings that may be occurred by touching hot roller
Make sure the Safety Cover is always closed, except when Film is being loaded.
☞ Switch for Protection of Feeding Device
It prevents the damage of feeding device from feeding table
The system is not working once the safety switch is activated
by abnormal raising of feeding table as right picture.
When the lever gets it's original position, the system will be working.
7/66
WARNING STICKERS
For the user safety, in the outer design, the below sticker is attached. Be cautious not to injured during operation.
☞Roller caution ☞Higher Temperature
Do not touch the roller and heating plate with your hand as you could be burnt. Do not touch on the heating part
Roller's higher temperature and press can damage your body
☞Cutting Caution ☞Electricity Caution
Do not touch your body on the trimming device Inside the machine, high voltage flows,
You can suffer an injury
Do not open the outer case
You can suffer injury or sudden death with electricity shock
☞Chain Caution
Do not your body wound into a chain.시오.
You can suffer an injury
WARNING STICKERS
8/66
WARNING STICKERS
WARNING STICKERS
9/66
PACKING CONTENTS
ITEMS Q'TY(EA)
LAMINATOR 1
FEEDING TABLE 1
PAPER GUIDE 2
AIR COMPRESSOR 1
AIR HOSE 1
MANUAL
1
SLEEKING IDLE ROLLER ASS'Y 1
VACUM PUMP
1
SEPARATOR ASS'Y 2
AIR BLOWER ASS'Y 2
REAR GUIDE ASS'Y 2
GLASS TUBE FUSE(20MM) 250V/12.5A 4
WRENCH SET 1
SUCTION CUP 2
`
CONTENTS
PROTOPIC AUTO - 540 HS
10/66
Altri manuali per PROTOPIC AUTO-540 HS
1
Indice
Altri manuali GMP Plastificatrice
GMP
GMP PROTOPIC AUTO-540 HS Manuale utente
GMP
GMP SURELAM-PRO540HR Manuale utente
GMP
GMP SURELAM-PRO540HR Manuale utente
GMP
GMP QTOPIC-380 Manuale utente
GMP
GMP ELECTRO ULTRA LAMITRIM-1800 Manuale utente
GMP
GMP EXCELMASTER-1600 Manuale utente
GMP
GMP SURELAM-PRO540HR Manuale utente
GMP
GMP PROTOPIC III-540 Manuale utente
GMP
GMP GraphicMaster 1600HR Manuale utente
GMP
GMP EXCELAM-1100SWING Manuale utente
