Go Electronic GOHD400 Manuale utente
GOHD400
High Definition PTZ Camera
User Manual
______________________________________________________________________________
GOHD400
user manual | 2
Precautions
Do not subject the camera to moisture or extreme humidity.
Do not attempt to disassemble the unit. Electric shock may occur.
Do not operate with a third party power supply.
Avoid vibration in transport, storage and installation.
Do not grasp the camera head when carrying the camera. Do not attempt to
turn the camera head by hand. Doing so may result in mechanical damage.
Do not power on the camera before installation is completed.
Package Contents
Camera
DVI male to HDMI female adapter
AC power adapter
Power cord
IR remote control
User Manual
______________________________________________________________________________
GOHD400
user manual | 3
Connections
______________________________________________________________________________
GOHD400
user manual | 4
Locations of Controls
1. Lens
2. Sensor for IR remote control
3. POWER lamp
4. STANDBY lamp
5. BOTTOM switch
6. Tripod mount screw hole
7. Fixing screw hole
8. SYSTEM SELECT switch
9. RS232 IN
10. RS232 OUT
11. HD-SDI VIDEO OUT
12. DVI-I VIDEO OUT
13. DC IN 12V
14. POWER switch
15. POWER lamp
______________________________________________________________________________
GOHD400
user manual | 5
BOTTOM switch
Set the camera mode via the dip switches on bottom of camera
Set both Switch 1 and Switch 2 to the ‘OFF’ position for
‘Normal Working Mode’
SYSTEM SELECT switch
This switch allows you to select the video format of the signal to be output from the
VIDEO OUT connectors.
Switch Position Video Format
0 1080p60
1 1080p50
2 1080i60
3 1080i50
4 720p60
5 720p50
6 1080p30
7 1080p25
8 720p30
9 720p25
A 1080p59.94
B 1080i59.94
C 720p59.94
D 1080p29.97
E 720p29.97
F -
IMPORTANT: You must restart the camera if any changes to switches are made in
order for changes to take effect.
SW-1 SW-2 MODE
1 OFF OFF Normal Working Mode
2 ON OFF Software Update Mode
3 OFF ON Factory Debug Mode
4 ON ON None
______________________________________________________________________________
GOHD400
user manual | 6
IR Remote
0. STANDBY Button
Press this button to enter Standby
Mode. Press it again to enter Normal
Mode.
(Note: Power consumption in Standby
Mode is approximately half of Normal
Mode)
1. POSITION Buttons
Press any of the numeric buttons 0-9
directly to recall stored preset
positions and settings.
Note: No action is executed if a
relative preset position is not stored
2. * Button
3. SET/CLEAR PRESET Buttons
SET PRESET: To set a preset
position press [SET PRESET] +
Numeric button (0-9)
CLEAR PRESET: To erase a preset
position press [CLEAR PRESET] +
6. CAMERA SELECT Buttons
______________________________________________________________________________
GOHD400
user manual | 7
Numeric button (0-9)
To erase all presets at once press
[*]+[#]+[CLEAR PRESET]
4. BLC ON/OFF Button
Press this button to enable backlight
compensation. Press it again to disable
backlight compensation.
(NOTE: Backlight compensation is
effective only in full auto exposure mode)
5. FOCUS Buttons
Used for focus adjustment.
Press [AUTO] to adjust focus
automatically.
Press [MANUAL] to adjust focus manually.
Adjust focus manually with [FOCUS+]
(focus far) and [FOCUS-] (focus near)
buttons.
Press and hold the [FOCUS+] and
[FOCUS-] buttons: Focus continues until
the button is released.
Note: [FOCUS+] and [FOCUS-] buttons
can only be used in manual focus mode.
Press the button corresponding to the
camera you want to operate with the
remote controller.
7. # Button
8. PAN/TILT CONTROL Buttons
Move up: Press [ ]
Move down: Press [ ]
Move left: Press [ ]
Move right: Press [ ]
Return camera to home position: Press
[HOME]
Press and hold the up/down/left/right
button: Camera will continue rotating from
slow to fast; the camera stops as soon as
the button is released.
______________________________________________________________________________
GOHD400
user manual | 8
9. Menu Setting
Menu button: Press this button to enter or
exit the on-screen display (OSD) menu.
10. ZOOM Buttons
Zoom Out: Press [ZOOM ]
Zoom In: Press [ZOOM ]
Press and hold the ZOOM button: Camera
will continue zooming in or zooming out
until the button is released.
11. Set Camera IR Address Buttons
[*]+[＃
]+[F1]: Address1
[*]+[＃
]+[F2]: Address2
[*]+[＃
]+[F3]: Address3
[*]+[＃
]+[F4]: Address4
______________________________________________________________________________
GOHD400
user manual | 9
Menu Settings
Press [MENU] button to display the main
menu. Use arrow buttons to move the
cursor to the item to be set. Press [HOME]
button to enter the corresponding sub-
menu.
EXPOSURE
•Mode (Exposure Mode): Auto, Manual,
SAE, AAE, Bright, WDR
•EV (Exposure Compensation): On, Off
•EV Level (Exposure Compensation
Level): -7 ~ +7
•BLC (Backlight Compensation): On,
Off
•G.Limit (Maximum Gain Limit): 0 ~ 15
•Flicker (Anti-Flicker): Off, 50Hz, 60Hz
•Iris (Aperture Value): F1.8, F2.0, F2.4,
F2.8, F3.4, F4.0, F4.8, F5.6, F6.8,
F8.0, F9.6, F11.0, Close (effective in
Manual and AAE mode only)
•Shutt (Shutter Value): 1/2, 1/4, 1/8,
1/15, 1/30, 1/60, 1/90, 1/100, 1/125,
1/180, 1/250, 1/350, 1/500, 1/725,
1/1000, 1/1500, 1/2000, 1/3000,
1/4000, 1/6000, 1/10000 (effective in
Manual and SAE mode only)
•Stren (WDR Strength): 0 ~ 6 (effective
in WDR mode only)
•Meter (Metering Mode): Global, Center
•Bright (Intensity Control): 00 ~ 23
COLOR
•WB-Mode (White Balance Mode):
Auto, Indoor, Outdoor, Manual
•RTuning (Red Gain Fine-Tuning): -10
~ +10 (effective in Auto, Indoor and
Outdoor mode only)
•BTuning (Blue Gain Fine-Tuning): -10
~ +10 (effective in Auto, Indoor and
Outdoor mode only)
•RG (Red Gain): 0 ~ 255 (effective in
Manual mode only)
COLOR
WB-Mode Auto
RTuning 0
BTuning 0
Sat. 110%
AWBSens Normal
Hue 0
Select Item
Change Value
[Menu] Back
MENU
Exposure
Color
Image
P/T/Z
Noise Reduction
Setup
Restore Default
[Home] Enter
[Menu] Exit
EXPOSURE
Mode Auto
EV Off
EVLevel 0
BLC Off
G.Limit 7
Flicker 50Hz
Meter Global
Select Item
Change Value
[Menu] Back
______________________________________________________________________________
GOHD400
user manual | 10
•BG (Blue Gain): 0 ~ 255 (effective in
Manual mode only)
•Sat (Saturation): 60% ~ 200%
•AWBSens (White Balance
Sensitivity): Low, Normal, High
•Hue (AWB Tone): -7 ~ +7,
Default 0 (effective in Manual
mode only)
IMAGE
•Brightness (Brightness
Adjustment): -5 ~ +5
•Contrast (Contrast Adjustment):
0 ~ 15
•Sharpness (Sharpness
Adjustment): 0 ~ 15
•B&W-Mode (Black & White
Mode): On, Off
•Flip-H (Horizontal Image Flip):
On, Off
•Flip-V (Vertical Image Flip): On,
Off
•Gamma (Gamma Adjustment):
0.31 ~ 0.83
P/T/Z
•SpeedByZ (Depth of Field
Scale): On, Off
•L/R Set (Reverse Remote
Control): STD, REV
•AF-Zone (Auto Focus Zone -
zone to bring in focus): Center,
Bottom, Top
•AF-Sense (Auto Focus
Sensitivity): Low, Normal, High
NOISE REDUCTION
•NRD2-Level (2D Noise Reduction):
Off, 1 ~ 5
•NR3D-Level (3D Noise Reduction):
Off, 1 ~ 5
•D-HotPixel (Dynamic Bad Points): Off, RESTORE DEFAULT
NOISE REDUCTION
NR2D-Level 4
NR3D-Level 3
D-HotPixel Off
DarkDetail 5
Select Item
Change Value
[Menu] Back
P/T/Z
SpeedByZ On
L/R Set STD
AF-Zone Center
AF-Sense Low
Select Item
Change Value
[Menu] Back
IMAGE
Brightness 0
Contrast +2
Sharpness 6
B&W-Mode Off
Flip-H Off
Flip-V Off
Gamma 0.45
Select Item
Change Value
[Menu] Back
Altri manuali per GOHD400
1
Indice
Altri manuali Go Electronic Telecamera di sicurezza
